Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Fob Eai Tet Hagnjkjgb Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm Fgjb Eai Tjgl Nlmskob - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2015, F45 2015 Sliding Table Saw F45 ElmoDrive Eye-level operation Template holder Fgsb Eaowcpuvoi Tksb Max. blade diameter 450 mm Motor 5.5 kW (7.5 HP) VARIO 3-axis scoring unit with tilting Double-sliding table with a carriage length of 3000 mm TPL 840 mm CNC angle stop UNO 90 CNC parallel stop 1000 mm Collet set (2 pcs.)

Condition: good (used), Functionality: fully functional, Inclined conveyor for round timber and logs with 5 chain strands. Conveyor length approx. 2.70 m. Width approx. 6.15 m. Chain spacing 1.40 - 1.0 - 1.60 - 2.0 m Increasing from 0.70 to 1.90 m. Chains with flighting. Shaft 70 mm. Driven by a 3.7 kW geared brake motor. Fgsb Eai Tewcp Snekjb Can be demonstrated.

Condition: used, Year of construction: 2010, Double Belt Sander Fob Eswbgdleai Tksgb Holytek PW 12 H Year of construction 2010 OscillatingMin/max working width 180/1200mm Min/max working thickness 10/250mm Sanding belt size 3730x270mm 2x Engine 7.5 HP Machine dimensions 2500x2250x1700mm, weight 1500kg - Year: 2010 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 11470, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Fgsb Eai Tswhpavokjb

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch Fgsb Eai Tjkwhffsksb press-in die missing!!! Availability: by arrangement Location: Solingen

Condition: good (used), 19 heavy-duty conveyor rollers 238 mm Ø x 600 mm roller shell length with 40 mm Ø shaft and 2 pedestal bearings, with chain wheel 16 B1/Z= 17, 1 geared motor drive with fluid coupling, if required also 6 spiral rollers for right-hand discharge 238/266 mm Ø x 900 mm Fgsb Ejwb A Hvoai Tksb

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 019, saw band length: 5,480 mm, saw band width: 20 mm, cutting height (max.): 120 mm, saw band speed: 29 mm/s, Band Saw Veneta Macchine Papper 2008 Wheel diameter 800mm Maximum cutting height on feed 160mm Cutting saw width 13-20mm Saw thickness 0.6-0.8 mm Saw speed 29 m/s Fjb Eaiswh S Ehe Tkjgb Material feed Motor power 5.5kw CE certificate

Condition: used, Palt Unificato Thickness Planer Planing width: 500mm Maximum planing thickness: 230mm 3-knife planer block Fgjb Eaijwgc H Hj Tksb 2 feed speeds

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 19072038, BSW-722-ST0_Mod packaging machine designed for packaging wood briquettes. The unit formats a bundle of 12 cubes (2 layers of 6 cubes flat). The automatic feeder inserts a leaflet onto the bundle of briquettes. The bundle is then transported through a film curtain and wrapped with film. Finally, the bundle is transported through a heat-shrink tunnel. Technical parameters: Year of construction: 2019 Installed power: 21 kW Maximum product height: 240 mm Fgebswh S Hxs Eai Tkjb Welding rod length: 800 mm Foil roll dimensions: 780 x 350 mm Machine dimensions (length x width x height): 3.9 x 2.4 x 2.5 m Dimension requirements for briquettes: Type A: cube weight: approx. 0.83 kg, package contains 12 cubes Type B: cube weight: approx. 1.0 kg, package contains 10 cubes Video showing the machine in operation: on request The price of a new machine is approx. EUR 75,000.

Condition: excellent (used), Year of construction: 1998, Used Scheppach RG 4000 dust extractor - dust-tested Fsb Eaowb Hqxji Tkjgb Technical specifications Hose length: 2500 mm Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 volts Mobile Extraction drum Availability: Immediately Storage location: 54634 Bitburg

Condition: used, Used machine table length approx. 2400 mm Availability: short term Storage location: Solingen Fgjb Eai Tokwhp Njkob

Condition: used, Year of construction: 2008, machine/vehicle number: 2008.01.161, grinding width: 1,350 mm, HEESEMANN MFA6 Wide Belt Sander Fgjb Eaijwh Scye Tksb Sanding width: 1350 mm Workpiece height: 3 – 150 mm Working height 880 mm Feed speed 3-15 m/min Aggregate: 1 x 15 kW transverse sanding aggregates; (belt 4350x140) 2 x 15 kW longitudinal sanding aggregate with 15 kW pressure lamellar belt; (belt 1900x1380) 1 x 2.2 kW brush-roller unit; 1 x 0.75 kW brush-roller unit; Total connected power: 63 kW Dust extraction total air demand: 195 m³/min Compressed air total air demand: 188 m³/h Dismantling on the Buyer's side

Condition: not inspected (used), Year of construction: 1996, Manufacturer: POUWELS Model: DEF 550 Machine type: Stair stringer Year of manufacture: 1996 Item number: 105 Location: Ex-warehouse: 54634 Bitburg Availability: Immediately Technical specifications: Laser Milling: Longitudinal direction Milling width Passage height: 150 mm Milling unit: Main motor: 5.5 kW Design: Stationary machine Adjustment: Control system Space requirement: Length Space requirement: Width Space requirement: Height Location: Ex-warehouse: 54634 Bitburg - available immediately - Fob Eowb Hpnoai Tksgb Machine was in operation at the customer's site until recently, but has not been tested yet, as we have not had time to do so.

Condition: used, Year of construction: 2018, Used machine Febonbiple Eai Tkegb

Condition: used, Year of construction: 2007, working width: 1,350 mm, CEFLA painting line with HEESEMANN sander 1- Hessemann MFA6 sander 2008 (no. 2008.01.191) Cross belt + 2x rollers + feet + 2x brusher 2- belt conveyor on rails (work without sander possible) 3- TNS 1500 belt conveyor 4- VS33/ACT-F series 2000 brusher 5- ES/IRM + TTE1500 Fsbewh R Sto Eai Tkegb 6- EASY2000/D painting machine 7- HOOD brushers + FEVS3/4 NIR + FEVEU2/5-IRM 8- TT14500 drying tunnel 9- TNS 1500 belt conveyor 10- TRC 1000/125-A roller conveyor 11- Rollers SMARTCOATER SP1 12- UV2000 IC MR + CRIM + TTE5850/SCR lamps Disassembly by the customer Net price given

Condition: new, Year of construction: 2024, New dust extractor Fjb Eai Toruuh Djkjgb Year of construction 2024 Technical data: Certified according to BGHM H3* / CE / GS Power consumption 2.2 kW Current consumption IE2 4.4 A Filter area 9.5 m² Dimensions 1575 x 910 x 2110 Dust garbage can volume 1 x 160 l Weight 405 kg Intake connection 160 mm, right Operating volume flow: 2300 m³/h Volume flow max/nom. 1780/1447 Negative pressure at nominal volume flow 2450 PA Negative pressure in front of the fan at VNenn 3160 PA Maximum sound pressure level 74 dB(A) Filter regeneration pneumatic max. 7.5 bar Operating mode: Continuous operation Compressed air connection must be available Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2019, Used raw air extraction unit Fgsb Eastr Hfpsi Tksb Year of construction 2019 Nominal capacity 2789 m³/h Filter area 1.8 m² max. negative pressure 1668 pa Chip collection volume 160 l Motor 1.1 kW 400 V Extraction nozzle 1 x 120 mm, 1 x 100 mm Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2020, Exhibition machine Year of manufacture: 2020 Equipment and technical data: including suction nozzle d= 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on / off switch, a potential-free contact for machine monitoring and automatic start / stop function, motor protection switch, volume flow monitoring / pressure difference display, 3 mobile dust bins with inserted chip bag and clamp, solid filter module made of galvanized sheet steel. Technical data: · Maximum volume flow: 5,040 m³/h · Nominal volume flow: 3,532 m³/h · Associated negative pressure: 2,500 Pa · Suction-side connection: d = 250 mm · Operating mode: continuous operation · Current type: three-phase current · Power consumption: 5.5 kW / 11.5 A · Filter area: 25.2 m² · Filter regeneration: automatic, pneumatic · Chip collection volume (total): 480 liters · Chip bags (PE): 600 x 600 x 1100 mm · Weight: approx. 1100 kg Fob Eaisvuctds Tkegb · Noise level according to EN 23744: 72 dB (A) · L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: · Standard compressed air coupling NW 7 approx. 6 bar, compressed air serviced and cleaned · 1 x 32 A CEE socket Location: Solingen Availability: by arrangement

Condition: new, Year of construction: 2022, Exhibition machine Year of construction 2022 Fgeb Eai Tst Sz Nbekob Equipment and technical data: Outlet on the right with pneumatic shaking off with powder extinguishing Description : Dust extractor type NE 300 with powder quenching with BGHM approval certificate, including suction nozzle, 5 m cable with plug and reversing switch, electric motor 400V/50Hz, on/off switch, lockable motor protection switch; with compressed air tank and compressed air pulse cleaning or pneumatic / motorized shaking, pressure difference indicator, mobile dust garbage cans with clamping bracket and chip collection bag Power consumption: 7.5 kW Power consumption: 13.5 A Filter area: 31.60 m2 Dimensions: 3440 x 1120 x 2420 Dust garbage can volume: 3 x 160 l Weight: 1210 kg Suction nozzle: 300 mm Maximum/ nominal volume flow: 6000/5085 m3/h Negative pressure at nominal volume flow: 2400 PA Negative pressure in front of the fan at Vnenn: 2950 PA Maximum sound pressure level: 74 dB Operating mode: Continuous operation Necessary connections: - Compressed air standard coupling NW 7 approx. 6 bar, compressed air maintained and cleaned - 1 x 32 A CEE socket With this system, uniform filling of the garbage cans cannot be guaranteed in every operating situation due to different extraction volumes and differing chip/dust contents. Availability: short term Location: Solingen

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 NESTRO® dust extractor, a new generation, more powerful, more compact, more economical and with some highlights that will inspire you. Including a new type of extinguishing device with drop flap and oxygen extraction, 5 m cable and CEE plug with reversible pole, IE3 fan drive, H-O-A selector switch and integrated emergency stop function. The NE-J ECO is of course H3-tested. The newly designed model fits into any standard sea container. The suction nozzle with blow-in box and non-return flap is located in the middle of the front of the dust extractor. The highly efficient JET filter regeneration guarantees long filter service life, low filter resistance and therefore high extraction performance. The dust garbage cans are each equipped with 4 swivel castors, a viewing window for checking the fill level and a sturdy chip collection bag. Technical data: Volume flow max./nom.: 8,000 / 6,925 m³/h Vacuum v.v./nom.: 3,400 / 2,750 Pa Suction side connection: Ø 350 mm Operating mode: Continuous operation Type of current: Three-phase current Power consumption: 11 kW /21 A / 50 Hz Filter area: 38 m² Filter regeneration: JET / automatic Compressed air consumption per cycle: 560 Nltr. Chip disposal: Chip garbage can with PE bag Weight: approx. 1,250 kg Noise value according to EN 11201: 72-74 dB(A) according to MRI (+/- 4dB) Length x width x height: 1,060 x 3,981 x 2,174 mm Necessary connections: Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free 1 x 32 A CEE connection socket Location: Solingen Availability: short term Fsb Eaieruuido Tkegb

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, Fsb Ejmrxznsai Tksgb manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Febsv Aqx Do Eai Tkegb Availability: short term Location: Solingen

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text display Fob Easu Dru Tji Tksgb for processing mode and error diagnosis infinitely variable feed rate up to 24 m/min automatic workpiece end detection Calculator function in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height 2100 mm max. scoring height, vertical 2100 mm max. cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Air requirement 1200 m³/h Air speed 20 m/s static negative pressure 1200 Pa Extraction connection: 2 x 120 mm Dimensions L x W x H 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height 2990 mm Compressed air connection: 6 bar Air consumption 50 NL/min Electrical connection value: 5.7 kW With Supercut scoring device With pneumatically pivoting saw unit With longitudinal stop for lower workpiece support With folding rail, short, complete Availability: by arrangement Location: Solingen