Used conveyors / conveying systems for sale (172)

Year of construction: 2010, condition: used, controller model: POWERTOUCH, power: 30 kW (40.79 HP), workpiece length (max.): 18,800 mm, workpiece width (max.): 15,000 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Workpiece length: 18,800 mm Workpiece width: 15,000 mm Min. plate length: 2,000 mm Max. plate length: 4,300 mm Min. plate width: 800 mm Max. plate width: 2,200 mm Max. feed rate: 80 m/min MACHINE DETAILS Control system: POWERTOUCH Total connected power: 30 kW EQUIPMENT Holszmtmnehccqrefk CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5107

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Max. panel length: 2400 mm Movement system: suction cups. Holhcsu Huwcscqrofk

Condition: used, machine/vehicle number: 007669, Max. panel width: 1200 mm Max. panel length: 2400 mm Movement system: collet Hfelhccqju Huv Sorek

Condition: used, Used Spiroflow AMC 3 with a tube size (OD) of 75mm, conveyor length 3,400mm. Stainless steel contact parts in 304. Unit is driven by a 1.5kw Sew-Eurodrive motor operating at 400v, 50 Hz, output speed 251rpm. Unit includes HMI controls. Unit includes a 200mm butterfly valve with air purge. Hfslhey Aaxfeccqrek

Condition: used, machine/vehicle number: 008521, Max. panel width: 1000 mm Max. panel length: 2400 mm Hfelhccozruyaoqrjk

Condition: good (used), log sorting line with 35 pockets, 2D scanner Holhcjzulcdocqrofk

Year of construction: 2026, condition: like new (used), Walking floor container, 70 m³ hydraulic walking floor hydraulic roof discharge auger Hfjlhcjztziqocqrok Hydraulic power unit with remote control for hydraulic roof Trough augers

Year of construction: 2026, condition: like new (used), Scraper chain conveyor Hfslhcoztzgcecqrek optional rod magnet separator

Condition: good (used), Green sorting line with 55 pockets, Timmer, FinScan (BoardMaster). Hfolszuc U Rjhccqrek

Year of construction: 2002, condition: used, functionality: fully functional, For sale are 2 used dispensing/roller conveying systems from the manufacturer Springer. These high-performance systems are designed for a maximum material length of up to 6 meters and achieve a throughput of up to 120 cycles per minute. Ideal for efficient and precise dispensing of wood or other materials in high-volume production. The dispensing systems are ready for use (disassembled). Helhcezudzljcqrefk Price upon request.

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Min. workpiece length: 400 mm - Max. length: 6000 mm - Max. workpiece width: 200 mm - Max. workpiece thickness: 200 mm - Roller motor power: 0.75 kW - Chain motor power: 1.1 kW - Feed rate adjustable via geared motor - Roller speed: 19 - 118 m/min - Belt speed: 10 - 60 m/min - 8 guiding belts - 17 steel feed rollers - Roller diameter: 80 mm Hfelhccqjxfgpgjrjk - Roller height from base: 900 mm - Pneumatic pressing - Dimensions (L/W/H): 565 / 175 / 120 cm - Weight: ~ 1500 kg

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D Holhccqszrfkverjfk - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm The line is sold excluding any warranty and liability for defects.

Year of construction: 2005, condition: used, Colour: Grey Empty weight: 900 kg Dimensions (LxBxH): 330 x 215 x 260 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Automatic output system present: Yes - Feed speed: Variable - Lift table present: Yes - Max. output length [mm]: 3100 - Max. output width [mm]: 220 - Automatic feed system present: Yes - Max. input length [mm]: 3100 - Max. input width [mm]: 220 - Voltage [V]: 400 - Transport dimensions: 3300mm x 2150mm x 2600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hslhccqszlc Niersfk Yorick Diebels

Condition: used, machine/vehicle number: 007135, Max. panel width: 800 mm Max. panel length: 2500 mm Helhot Hmppjccqrefk Panel return for edgebander: Left

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Hfjlhec Umftjccqrek Other versions and lengths available upon request.

Year of construction: 2016, condition: used, Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: longitudinal to transverse. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. If you have any further questions or require further details, please don't hesitate to ask! TECHNICAL DETAILS TO BE VERIFIED Helow Db Epohccqrofk

Year of construction: 2016, condition: used, Panel rotation device used in production lines. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: longitudinal to transverse. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. Hfjlhccqjw Da Shjrok

Year of construction: 2016, condition: used, * MARHOS brand panel turning device code MMA004.06 Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: transverse to longitudinal. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. Hslhccew Db Htoqrofk

Condition: used, Length: 4100 mm Width: 930 mm Number of rollers: 6 pieces (5+1) Roller width: 5 x 740 / 1 x 768 Roller diameter: 160 mm Hfjlhszqf Avjccqrek Working height: 1000 mm

Condition: used, machine/vehicle number: 008661, Panel return for edgebander: Left Helhccqszmmtzorsfk

Condition: used, Year of construction: 2003, feeder rollers, transfer belts for 6 meters, retractable forks, lift tables with rubber-coated parcel drive chains, outfeed chains Hfeloycxtyehccqrjk

Year of construction: 1986, condition: used, Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide Hfolheb R Adcjccqrek -Roll width: 2900 mm -Roller conveyor length: 1500 mm -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Year of construction: 1986, condition: good (used), Rotary device for edge processing, turning station, turning table, rotary station, rotary table, transport system, roller conveyor -for edgebanding machine, edge banding machine, edge bander Helhccqjb Rynysrofk -Turning station: for rotating workpieces -Roller track: Narrow -Roller width: 1300 mm -Roller conveyor length: 2900 mm -with: adjustable impact wall -Roller conveyor: Wide -Roll width: 3400 mm -Roller conveyor length: 1400 mm -Swivel head roller: rubberized -Transport dimensions: 3000/1500/H960 mm 3500/1550/H1850 mm -Weight: 1000 kg

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm Holhccod Tg Dcsqrefk -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm Hfsljx Url Uohccqrsk - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW