Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm,

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: Knjdpfj Aa Ad Tjx Ah Noc - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: used, Year of construction: 2020,

Condition: used, Year of construction: 2018, This system consists of anautomatic spraying machine with part detectionand, in addition, a glass detection system. Roller conveyor is installed in front of and behind the machine. Technical data: Item 1 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width 1,438 mm - Working width 1,300 mm - Working height 940 mm ± 20 mm - Roller diameter 80 mm - All rollers with hose cover - Roller pitch 150 mm - Motor power 0.75 kW - Feed speed 0.7 – 3 m/min via frequency inverter Item 2 Automatic spray painting machine - Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Control panel on the right - Suitable for solvent-based and water-based paints - Price for reconditioned machine - As-is condition, machine not overhauled - Spray gun drive in Duo configuration - Dry extraction - Extraction nozzle diameter 400 mm - Exhaust air flow rate 7,000 m³/h - Feed speed continuously variable ~ 1.5 – 4 m/min. - Light curtain, part detection type LS 25 and glass detection system - Touchscreen control - Paper belt transport system - 1 paint circuit installed - 1 pump stand - Air atomisation system - Number of paint pumps: 1 - Length: 3,630 mm - Width: 3,575 + 990 mm - Total power consumption: 13 kW - Paint finish: RAL 7035 light grey and 9005 black - Location: not in stock - Voltage fluctuations: max. +/- 5 % Item 3 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width: 1,438 mm - Working width: 1,300 mm - Working height: 940 mm ± 20 mm Ksdo Aba U Eepfx Ah Njnc - Roller diameter: 80 mm - All rollers fitted with hose covers - Roller pitch: 150 mm - Motor power: 0.75 kW - Feed speed 0.7 – 3 m/min via frequency converter

Condition: used, Year of construction: 2023, functionality: fully functional, 6-axis CNC spraying robot for automatic surface treatment of windows, doors, and other suspended items. Features tracking, automatic color change, and intelligent control of paint and spray pattern. Manufacturer: CML Model: Ghost X Master Year: 2023 Condition: Used machine Max. workpiece dimensions: 3500x2640x150 mm Automatic color change: 5 colors + wash 2 spray guns: Air-mix Graco G40 Tracking: painting on moving workpieces Power: 18 kW Air pressure: 6 bar Workpiece loading/unloading: manual Knedo Aazwxepfx Ah Noc Paint pumps: 5 pcs Wash pump: 1 pc.

Condition: like new (used), Year of construction: 2011, operating hours: 45 h, functionality: limited functionality, Paint finishing line for window coating with scanner, 25 trolleys, 6-axis painting robot with teach-in mode, and spray booth with paint recovery system via cooling. Extraction wall equipped with two extraction collectors, 800x3000xD550. The line has operated only 40 hours due to a change in production profile. Ready for recommissioning and internal equipment replacement. Option to purchase carousel and robot separately. Knsdeywaqqopfx Ah Nec

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 Ksdezg Epujpfx Ah Nsnc • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Year of manufacture: 2011 Colour: White Weight: 7.500 kg Kedpfx Aszmvawjh Njnc - Year: 2011 - Documentation available: Yes - Max. working width [mm]: 1300 - Number of spray booths [pcs]: 1 - Type of pump: Wagner - Options: Spray gun - └ Number of spray guns [pcs]: 4 - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, operating hours: 60,000 h, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 1x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) Kjdpfx Ahev T Ttxj Nsnc 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) 2x hydraulic lifters (200-900mm height)

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 8484.20, height adjustment type: mechanical, total length: 2,690 mm, total width: 1,200 mm, total height: 1,700 mm, input frequency: 50 Hz, Bürkle glue spreader Manufacturer Bürkle - year of construction 1998 - DAH 1300 Technical data: - Type DAH - 4 roller machines - Workpiece width 50-1300mm - Workpiece length 250mm - Working height 3-100mm - Application roller diameter 239mm - Dosing roller diameter approx. 174mm - Main motor approx. 3kW - Feed rate max. 45 m/min Knjdpfet I S H Aox Ah Nec The sale takes place under exclusion of any warranty.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Kodsz Hbm Topfx Ah Nsnc Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: used, Year of construction: 2006, operating hours: 100,000 h, functionality: fully functional, feed rate X-axis: 30 m/min, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 48,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 68,000 mm, total width: 2,600 mm, working height: 75 mm, power: 720 kW (978.93 HP), input frequency: 50 Hz, input current: 1,800 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, compressed air connection: 6 bar, complete lacquering line: 2x Heesemann sanders (LSM8 2006.12.141, 3rollers-3pads/ LSM8 2006112.151, 2pads) 2x Heesemann cleaning mach. (EA8 2006.12.142 / EA8 2006.12.152) Knodpfxsv Ta Tfs Ah Njc 1x Cefla hot air drying tunnel (FEV EU2/8 6 IRM / TNSL) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRU+TN 4000/HT / 4lamps UV 2000 M2+CRU+TN 5000/HT / 2lamps / 4 lamps) 2x stain roller coaters ( Smartcoater M-EVO / model M) 2x heavy putty roller coaters (Smartcoater SP / SP1-EVO) 3x lacuer roller coaters (Smartcoater MF) 10x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: used, Year of construction: 2016, functionality: fully functional, SUPERFICI painting robot with 2 drying tunels and UV dryer and cooler 1.CATTINAIR - belt converyor (mat. loading/feeding) 2. GIARDINA -sanding machine 3. SUFERFICI - MAGNUM 3.2.2 - painting robot 4. NEW FINISHING - drying tunnel 1 5. NEW FINISHING - drying tunnel 2 6. NEW FINISHING - UV dryer Kodpfxsz Izhyj Ah Nenc 7. CML Finishing - cooling tunnel 8. CATTINAIR - belt conveyor (unloading)

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel Knodpoz Nd I Tjfx Ah Noc emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 CE marking

Condition: good (used), Year of construction: 2002, functionality: fully functional, working width: 1,300 mm, was completely refurbished in 2022. Knodjy Uacuopfx Ah Nsc

Condition: excellent (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: DB504402A, working height: 880 mm, working width: 1,300 mm, feed rate X-axis: 20 m/min, height adjustment type: electric, workpiece height (max.): 80 mm, total height: 940 mm, type of input current: three-phase, overall weight: 2,400 kg, Holmelt glue applicator by Sorbini, very lightly used, approx. 600 operating hours Kedpfx Aey Ed Ucjh Nonc

Condition: good (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 504404C, feed length X-axis: 20 mm, working width: 1,300 mm, working height: 940 mm, Machine for smoothing lacquer using a silicone belt with UV curing Knjdpfx Aoy Effcsh Njc

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 Kedpfxsxm Twto Ah Nonc VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation.

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. Kodezumxmepfx Ah Nonc TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: used, Year of construction: 2018, operating hours: 2,040 h, Makor Spraying Robot RoboSTAR M – 2018 Makor RoboSTAR M spraying robot, manufactured in 2018 and in good working condition. The machine has low operating hours and has been well maintained, making it an excellent option for automated spraying applications. Ideal for businesses looking to improve efficiency, consistency, and production capacity. Kodpezw Hzaefx Ah Nonc

Condition: used, Year of construction: 2000, functionality: fully functional, feed rate X-axis: 40 m/min, works good! Kedpeymtikjfx Ah Nenc

Condition: excellent (used), Year of construction: 2011, I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500 Knodpfot S Ehzex Ah Nec Year 2011 Working width 1400mm. Total length 3,70m Total power 71,55 kW Very good condition, available immediately.

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan Kodpjx Ah A Ajfx Ah Njnc - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 3285401, type of input current: three-phase, SCM Superfici Mini Plus P spray booth, automatic spraying machine, year of manufacture 2023. Knedpoz Nggxefx Ah Noc

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Kodpfx Ahetxnp Ne Nonc