Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Festo Type: PP Machine number: 6,237 Machine type: Chain feeder Electrical Data Operating voltage: 220–380 V Connected power: 2.2 kW Drive Data Speed: up to 2,800 rpm Working Area Gjdpfx Ae Adu A Ajnwjui Chain width: approx. 50 mm MACHINE DETAILS Dimensions Length: 800 mm Width: 700 mm Height: 1,500 mm Weight Weight: 200 kg

Condition: used, Year of construction: 2013, travel distance X-axis: 3,300 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, TECHNICAL DETAILS Working area, X-axis: 3,140 mm Working area, Y-axis: 1,560 mm Travel distance, X-axis: 3,300 mm Travel distance, Y-axis: 2,000 mm Number of controlled axes: 3 Milling spindle Number of controlled axes: 3 Number of tool positions: 16 MACHINE DETAILS Number of vacuum pumps: 2 Suction capacity per vacuum pump: 250/300 m³/h EQUIPMENT Flat table Gujdpfx Ao Aihdwsnwji Milling spindle on top Automatic tool changer Liquid cooling for the milling spindle Tool magazine on the rear of the machine Vacuum pumps FANUC panel control CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8497

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Frommia Type: 710 Machine Type: Spindle Moulder Work Table Table Dimensions: 340 × 250 mm Table Slots: 3 Spindle Speed: 150–2,500 rpm MACHINE DETAILS Dimensions Length: 6,800 mm Width: 550 mm Godpfxe Ad Info Anwoui Height: 1,600 mm Weight: 400 kg

Condition: repair required (used), Year of construction: 2000, functionality: not functional, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, overall weight: 1,100 kg, Equipment: documentation/manual, HOFMANN table milling machine, type TF1200, with a sliding carriage on the side and an extendable table support, with electric height adjustment. Unfortunately, the programs on the control unit cannot be saved. Otherwise, the machine is in very good condition. Gsdpfx Asz Eztkjnwsui

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. Gujdpfx Anozwp Uiowei GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 270 mm, number of planer blades: 4, Dincmak EKS T4 Z – 2007 Machine type: Copy lathe for wood with sanding unit Gedpo Ah R Tiefx Anwsui Working length capacity: 1200 mm Blade motor power: 3 kW x 2 Carriage motor power: 1.5 kW Cutter rotation speed: 5000 rpm Carriage travel speed: 0 - 15 m/min Weight: 2000 kg Spindle quantity: 1 for the model and 4 for the workpiece Production capacity: Four workpieces per operation Copying system: Pneumatic tracing of a three-dimensional template Workpiece centering: Pneumatic Carriage feed: Automatic, with ball-screw drive Carriage guides: Linear bearing slides Feed control: Two adjustable speed zones Construction: Enclosed steel body Safety: Electronic safety features Applications: Shaped wooden components, including furniture legs and tool handles

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to Gjdpszcgtbofx Anweui 10 m.

Condition: used, Year of construction: 1984, machine/vehicle number: 200/84, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 880 mm, table length: 1,100 mm, total height: 900 mm, overall weight: 640 kg, Bäuerle SFM 100 milling machine from a model-making workshop. In good, fully functional condition. Guedpj Airqcjfx Anwoi

Condition: good (used), Year of construction: 1978, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence Gusdpfx Anszvdk Ajwoi 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 5.7 kW (7.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, actuation type: manual, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 800 mm, table length: 1,200 mm, overall weight: 700 kg, Table milling machine, type F 50 - Year of manufacture: 1977 - 3,400, 5,000, 6,000, 8,000, 10,000 rpm - Clockwise/counterclockwise rotation - Milling spindle: 30 mm - Clamping length: 140 mm - Wood fence with fine adjustment, rotatable - Table size: 1200 x 800 mm Gsdpfxj Ah Tcuj Anwsui - Weight: 700 kg - with Holz Her 3-roller feed unit - Good condition - Machine has been inspected - Subject to differential tax

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 5429, table width: 4,800 mm, table length: 2,600 mm, table height: 600 mm, workpiece height (max.): 1,200 mm, travel distance X-axis: 4,800 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, We are offering this used CMS ARES 348/26-NEWPX5 vertical machining center, manufactured in 2009. Manufacturer: CMS Model: ARES 348/26-NEWPX5 Year of manufacture: 2009 Serial number: 5429 Machine type: Vertical machining center 5-axis CNC gantry milling machine | Year of manufacture 2009 | FANUC control Fully operational industrial 5-axis CNC gantry milling machine from CMS (Italy). The machine has been used for milling, drilling, and contour machining of aluminum honeycomb panels, sandwich panels, and other technical sheet materials. Working demonstration possible in Tilburg. Technical specifications Manufacturer: CMS, Italy Model: Ares 48/26-NEWPX5 Year of manufacture: 2009 Serial number: 5429 Number of axes: 5 CNC control: FANUC Nominal X × Y × Z travel: approx. 4,800 × 2,600 × 1,200 mm (X/Y to be verified) Workpiece clamping: Aluminum vacuum grid table with multiple zones Tool changer: Automatic tool magazine, 16 positions Condition: Fully operational CE marking: Present Included spare parts: * Reconditioned spare milling spindle, CMS 12 kW, max. 24,000 rpm; type CMS 63 F; item number 0014477. Reconditioned and supplied by D.E. Spindel Doctor in 2020, including wooden transport crate. * New, unused spare vacuum pump, Busch SV 1025 D 000, year of manufacture 2018, with 3-phase electric motor and filter system; unused and in original packaging. Gujdpj Ai D Ebefx Anwoi Current application: Milling of aluminum honeycomb and sandwich panels, composites, plastics, technical sheet materials, and large three-dimensional workpieces. The Z-axis travel of 1,200 mm provides space for taller products and molds; the actual machining capabilities depend on the tooling and workpiece clamping. Scope of supply and inspection Location: Tilburg, Netherlands. The machine is fully operational and can be inspected while running by appointment. Dismantling, transport, and reinstallation by arrangement. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 1999, machine/vehicle number: P9970, functionality: fully functional, operating hours: 8,000 h, input voltage: 400 V, type of input current: three-phase, pivoting range: 360 °, rip fence adjustment: CNC-controlled, rotational speed (max.): 18,000 rpm, rotational speed (min.): 12,000 rpm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, ANDREONI PROGRESS 20 – Automatic, robotic engraving pantograph Year: 1999 Guodezltxuopfx Anwji CNC controlled! 20 workstations, 200 mm cutter spacing, pneumatic workpiece clamping. High-power spindles, 1.1 kW. The machine is in excellent condition due to moderate use. The manufacturer is still in operation and is located in Milan (Italy). Numerous tools included. Conveyor belt for chip removal.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200064, type of input current: three-phase, overall weight: 312 kg, input voltage: 380 V, We offer this used OMEC 750 CN Dovetailer, year of construction 2020. If you have any questions or need more information, feel free to send us a message or give us a call. Gsdpfx Ans Afn A Sswjui

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor Gusdezl D Dnopfx Anwei • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, functionality: fully functional, spindle diameter: 30 mm, actuation type: electric, SCM T130E Undercut Spindle Moulder Gujdpfx Anj Aiqy Rswsi Spindle diameter: 30mm Spindle length: 140mm Variable spindle speed: 3000/4500/6000/7000/10000 rpm Main motor power: 7.5 kW Electronic height adjustment of the spindle using a switch CE certified Technical documentation included

Condition: good (used), Year of construction: 1998, functionality: fully functional, Robust and high-quality table milling machine from the manufacturer Hofmann. The machine was manufactured in 1998 and is suitable for a wide range of milling operations in carpentry and woodworking. Technical data: - Manufacturer: Hofmann - Type: TF 1200 - Year of manufacture: 1998 - Machine number: 126-01986 - Motor power: 5.0 / 6.2 kW - Three-phase connection: 400 V, 50 Hz - Current consumption: 10 / 13 A Gujdpj Agm T Hofx Anwoi - Milling spindle: Ø 30 mm - Spindle speeds: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm - Spindle: not swiveling - Height adjustment: manual via handwheel - Dust extraction connections: typically 2 × Ø 120 mm Feed system – additional cost of €500 net. Inspection and test run possible by arrangement. Loading and shipping can be arranged.

Condition: new, Year of construction: 2026, Martin Swivel Spindle Milling Machine T 27 Flex - swivelable on both sides - Flexibility for today and tomorrow. Setting up a swivel milling machine is usually a major challenge. Not with the T27 Flex, which features a modern touchscreen control: thanks to the integrated tool offset function, you can set up even complex milling patterns with a swiveled spindle in no time. This is the only way to efficiently utilize the large swivel range of 2 x 46° – and you can fully follow your preferences. Furthermore, the machine can be very precisely adapted to the individual requirements in the workshop. Equipment: T 27 Flex T 2712-a Electric adjustment of the milling fence T 2711-a Digital display of the feed jaw position in the control panel T 2731-a Table extension on both sides + extendable workpiece support T 2735-REa Fence for plunge milling Gsdpfx Anj Ai Hwqowsui T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Milling jaw clamping system Auto Lock T 2745-a Swivel pre-installation T 2790-La Console for feed stand mounting on the left The photo shows only an example machine / feed and support are not included. What is included is stated in the text. Location: in warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2020, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 45 °, actuation type: electric, table width: 780 mm, table length: 2,500 mm, overall weight: 660 kg, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment, left/right, 6 speeds, Aigner stop, 2 x 500 mm, digital display on the fence, Guodpfx Asykar Henwei table 2500 mm x 780 mm, mechanically programmable fence with two displays, system for quick removal from the work table, including Felder 3-roller feed system. New price: €18,700.00 Available approximately September 2026. Shipping possible for an additional charge!

Condition: used, Year of construction: 1984, Design: swiveling Swiveling angle forward: +45° Swiveling angle backward: -5° Table length: 2200 mm Table width: 1100 mm Extendable frame support: Yes Selection of spindle speeds: belt changeover + pole change Taper of the milling spindle: MK 5 Diameter of the milling arbor: 30 Material of the stand: steel Position of the control panel: bottom Height adjustment of the spindle: electric Swiveling adjustment of the spindle: electric Spindle locking: manual Spindle brakes: electric Dust extraction diameter of the milling fence: 120 mm Spindle direction of rotation: left/right Motor power: kW Electric axes: swiveling / up / down adjustment Closing of the table opening: insert segment Design of the fence jaws: Aigner fence system Fence adjustment: manual Milling fence adjustment: manual Weight approx.: 1200 kg Gujdpfj Ai Ec Dox Anwji Dimensions: 2200 x 1500 x 1600 mm Location: Nattheim

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds Gsdpfx Aox U Dfgsnwjui 380 Volt Shipping possible at extra cost!

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, space requirement width: 762 mm, space requirement length: 1,468 mm, space requirement height: 1,278 mm, overall weight: 300 kg, warranty duration: 6 months, Equipment: CE marking, Two coordinated CNC milling machines / special machines for the fully automated series production of consumables. The product is repeatedly requested in large quantities in international online and retail trade; worldwide, there are only a few manufacturers that produce this product. THE MACHINES – KFM25: produces the blank from the solid material – PFM25: processes the functionally critical high-end profile EQUIPMENT – Process: Infeed via conveyor belt → Machining → Ejection – Industrial control with touch operation, quantity input and counter – System software configured for 6 products, easy changeover – Closed-loop stepper motors, milling spindle 2.2 kW/ER20 – Integrated vacuum, extraction Ø 90 mm – CE marking with declaration of conformity – 1-day on-site training included during handover TECHNICAL DATA – Year of construction 2025, used, very good condition – 230 V / 50 Hz, pneumatics 6–8 bar – Repeatability approx. ± 0.01 mm – Weight approx. 150 kg per machine Gjdpfx As Afbvrsnweui PERFORMANCE – approx. 40,000 pieces / 1-2 shifts per machine and month – Material consumption approx. €0.10 / piece – Achievable selling prices up to approx. €3.80 / piece Inspection with test run possible in Germany at short notice, handover by arrangement. Sold as seen, excluding any warranty for material defects and only to businesses. All information is based on experience and is without guarantee. Only the written purchase agreement is binding.

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 79-12/075-98, functionality: fully functional, input voltage: 380 V, input current: 86 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: electric, table length: 2,000 mm, total length: 2,220 mm, total width: 710 mm, total height: 1,220 mm, overall weight: 450 kg, Equipment: documentation/manual, Everything on the machine is in perfect working order. The sliding table has a length of 1920 mm. It was manufactured without brakes. It is in the condition shown in the pictures and is available for testing on a pallet. Gedpfxez N S Izj Anwoui

Condition: like new (used), functionality: fully functional, spindle diameter 35mm Gsdpfxezx U Nuo Anwsui 5 speeds from 3000 to 10,000 rpm motor power 5.5 kW Maggi feed system with 4 rollers and adjustable speed indexing carriage with a graduated scale for angle adjustment table 120x730 cm 760 kg year of manufacture: 2001 DTR manual – YES CE marking – YES guard for mortising AIGNER table tops 4 feed speeds turret for adjusting milling depth option to purchase without the feed system external dimensions: 2550x1700x1660

Condition: excellent (used), functionality: fully functional, 4 speeds, ranging from 3000 to 10,000 rpm. Engine power: 4 kW. Table dimensions: 950 x 370 cm. Tilting spindle. CE marking. Year of manufacture: 2015. Mobile trolley integrated into the table. Rotation: right/left. Adjustable angle fence. Trolley lock. Manual adjustment of spindle angle and height. Cast iron table. Guodpfx Aezzpchenwsi External dimensions: 960 x 850 x 1280.

Condition: excellent (used), Year of construction: 2001, - working length mm 1200 Gsdpfx Ajz Nww Ijnwoui - max tenon length 100 mm - tool rotation 9,000 rpm - tenoning unit motors (n.2) 8 hp (4 hp each)