English
German English French Dutch Dutch
Call
Lake Bluff United States
886 km
1999
used
SPECIFICATIONS: Dimensions: 214" x 143" x 70" HT Weight: 25000 pounds Main Mump Motor: 150 H.P./ 1800 RPM/ 460V/ 3 PH, 60Hz Vuk3wy Hydraulic Pressure Maximum (Thrust): 4000 PSI Hydraulic Pressure Maximum (Acceleration): 4000 PSI Hydraulic Pressure Maximum (Clamp): 1500 PSI Hydraulic Volume Maximum (Main): 65 GPM Hydraulic Reservoir Capacity: 300 GAL Recommended Water Pressure for Heat Exchangers: 30 – 125 PSI Recommended Water Volume (Minimum): 40 GPM at 85° F Water Inlet Pipe Size: 1 ¼” NPT Max...
FRONIUS Deltaspot FRONIUS Deltaspot FRONIUS Deltaspot FRONIUS Deltaspot FRONIUS Deltaspot FRONIUS Deltaspot FRONIUS Deltaspot
more images
7
Call
Los Angeles United States
2081 km
good (used)
Fronius Deltaspot Spot Welder, 250 KVA B9g80bhwj9
VEB P 200 VEB P 200 VEB P 200 VEB P 200
more images
4
Call
Pfungstadt Germany
7851 km
1990
good (used)
Item number MA1133 Manufacturer VEB Type P200 Year of manufacture ca. 1990 Machine-No. 78/400 length [mm] 1100 Jx7x8m width [mm] 450 Height [mm] 1300 Weight [kg] 190 Connected load 380V / P 15 KVA / P 32 KVA throat [mm] 500 Punching force [to] 3,3 Kp / cm2
Dalex A11.1 Dalex A11.1 Dalex A11.1 Dalex A11.1 Dalex A11.1
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Spot welding device, spot welding machine, spot welding system, spot welding gun Bjrrkc9iwm -Manufacturer: Dalex, spot welding machine type A11.1 -Voltage: 380 V. -Transport dimensions: 230/270/H205 mm -Weight: 20 kg
MESSER GRIESHEIM UPL35DH MESSER GRIESHEIM UPL35DH MESSER GRIESHEIM UPL35DH MESSER GRIESHEIM UPL35DH
more images
4
Call
Mühlheim am Main Germany
7845 km
1983
excellent (used)
Machine type: Spot welding machine Manufacturer: MESSER GRIESHEIM Camf9z3l87 Model: UPL35DH Year of manufacture: 1983 Condition: very good Offer type: used machine Technical data: Connection: 400 volt Power: 35/48 kVA Drive: 13,2 kA Remark: Control S224K, throat 50 mm, el./pneum. release, maximum short-circuit power 60 kVA, water cooling Weight: 280 kg The machine is in a very good and immediately operational condition and can be visited and demonstrated with pleasure. We would be pleased if o...
MASING - KIRKHOF ME 21/1h - 50
more images
1
Call
Dreieich, Germany Germany
(dealership location)
7842 km
1972
used
current capacity 50 kVA throat 300 mm contact pressure capacity 565 kg short circuit voltage 118 kVA voltage 380 V rated capacity bei 50% ED = 50 kVA total power requirement kW weight of the machine ca. 700 kg Beolmortuq dimensions of the machine ca. 0,65 x 1,20 x 2,00 m foot switch - Serial-no.: 1180 / 63 - with 2 - manual engagement - Nominal voltage primary 380 V, secondary 3.5-5.2 V - Rated current at 50% E.D. primary 132 A, secondary 9600 A - Short circuit current primary 310 A, secon...
DALEX SL16/S DALEX SL16/S DALEX SL16/S DALEX SL16/S DALEX SL16/S DALEX SL16/S
more images
6
Call
Leipzig, Germany Germany
(dealership location)
7963 km
used
current capacity: 0 kVA throat: 280 mm contact pressure capacity: 17-278 daN rated capacity: bei 50%ED:16 kVA rated capacity: Pmax. ca. 50 kVA open-circuit voltage: 1,8-3,6 V Required air-pressure: 6-10 bar total power requirement: 37 kVA weight of the machine ca.: ca. 200 kg dimensions of the machine ca.: L:0,85xB:0,7xH:1,2 m secondary short circuit current: 17 kV 1 foot pedal i.D. Plwap
DALEX SF16-1 DALEX SF16-1 DALEX SF16-1 DALEX SF16-1
more images
4
Call
Barsbüttel Germany
7701 km
used
current capacity:16 kVA throat:180-500 mm electrode capacity:278 daN horn spacing:140-300 mm Cqemu0b3 weight of the machine ca.:200 kg
- Offer number: 8/106 - Spot welding machine with horizontal pneumatic from Festo (indenting device ) - Manufacturer: Dalex - Type: P 31 for Rocketfix - Serial number: 2651462 /11 - Nominal power 20 KVA - Connected load 33 KVA - 380 V with 63 A plug 50HZ - Cooling type water cooled - with Festo type DNC-80-50-PPV-A indenting device Nv22n - dimensions (LxWxH): 1200 mm x 1300 mm x 1200 mm - weight approx.: 600 kg - optical condition according to photos - used - functional Notes: The goods offered ...
Dalex RA 11-2  3111-8 Dalex RA 11-2  3111-8 Dalex RA 11-2  3111-8 Dalex RA 11-2  3111-8 Dalex RA 11-2  3111-8 Dalex RA 11-2  3111-8 Dalex RA 11-2  3111-8 Dalex RA 11-2  3111-8
more images
8
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Spot welding device, spot welding machine, spot welding system, spot welding gun -manufacturer: Dalex, spot welding machine type RA 11-2 -spot welding gun: Type 3111-8 -rated power: 2.4 kVA -operation: by hand -transport dimensions 430/460/H480 mm -weight: 31 kg Bjntpzsbyg
 PECO Messer-Griesheim Typ: TS 35E 100  PECO Messer-Griesheim Typ: TS 35E 100  PECO Messer-Griesheim Typ: TS 35E 100  PECO Messer-Griesheim Typ: TS 35E 100  PECO Messer-Griesheim Typ: TS 35E 100  PECO Messer-Griesheim Typ: TS 35E 100  PECO Messer-Griesheim Typ: TS 35E 100  PECO Messer-Griesheim Typ: TS 35E 100
more images
8
Call
Hoppstädten-Weiersbach Germany
7778 km
1990
good (used)
Control: S124 Clamping surface: 120 x 120 mm Grooves: 14 mm B8gluoravv electrode force: 75-450 kp Rated power: 35 kVA Maximum distance between clamping plates: 200 mm Data sheet control available. Two-hand control included (see photos) Year of construction: ca 1990 W=640 D=750 H=1480 mm weight: 252 kg (incl. pallet) Housing of the pressure switch provisionally repaired. The machine was not in use in our house. Sold without any warranty and guarantee. No return. Viewing by appointment. All inform...
DALEX PL 40-2_EH DALEX PL 40-2_EH DALEX PL 40-2_EH
more images
3
Call
Korb Germany
7958 km
refurbished (used)
Power at 50%: 40kVA Short circuit-current: 26,2kA Electrode force: 65-390daN / single stroke Throat depth: 250-550mm --- Weld control: MPS 10 beta (5-times, 8-program) --- Extra Equipment: - foot pedal - main switch Cakcargd80 --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock
Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22 Schlatter GP 2.232.42.22
more images
10
Call
Ummendorf Germany
8037 km
1980
ready for operation (used)
Manufacturer: Schlatter Type: GP 2.232.42.22 Year of manufacture: 1980 Condition: Used/Functional Accessories: Copper attachments, description, schematics U37xkjwr
NIMAK PMP 6-1/100/7054 NIMAK PMP 6-1/100/7054 NIMAK PMP 6-1/100/7054
more images
3
Call
Eislingen, Germany Germany
(dealership location)
7987 km
1992
used
current capacity:100 kVA throat:280 mm Y7mihrzol capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off
AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1 AEG SM/60131.1
more images
15
Call
Vierkirchen Germany
8109 km
1985
reconditioned (used)
AEG Spot Welding Machine 100kVA Qiqe7 Rated power 50%ED: 100kVA Rated voltage: 380V Connected load: 382kVA Electrode force: 200-1200daN Weight: 640kg Welding control: TECNA TE180 Welding transformer: AEG ST1-100/0
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 -Welding power: 65 kVA -Welding control: Aro 25-002-2 -Transport dimensions: 1000/510/H1720 mm Lq8mwlk9 -Weight: 538 kg
Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201 Ideal CSR 201
more images
15
Call
Winterlingen Germany
7987 km
1996
used
Ideal CSR Typ. 201 - 21 wire mesh production line CSR Project JIg welding machine Year of manufacture 1996 Switch / control cabinet kVa125 Made in Germany Control: W/Siemens Handheld Computer Control Mounted In Enclosed Wire Cage Safety Structure The coordinate welding machine CSR 201 is used for resisting point welding of sheet metal and wire products in stencils: Work-piece dimensions: Length max.1800 mm Width max. 750 mm Height max. 200 mm X-axis for driving the welding unit according to...
DALEX PMS 11-4 MF DALEX PMS 11-4 MF DALEX PMS 11-4 MF DALEX PMS 11-4 MF
more images
4
Call
Korb Germany
7958 km
good condition (used)
Power at 20%: 180kVA Highest welding-current: 28kA Electrode force: 20-120 + 100-600daN / double stroke Throat depth: 350mm --- Weld control: HWI 2808 / HWS 2102 Profil IQ 64 program Cafq0b0blt --- Extra Equipment: - foot pedal - flow monitor - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock
TECNA 4602 TECNA 4602 TECNA 4602
more images
3
Call
Weiterstadt Germany
7845 km
1996
used
Spot welding machine G3pgpec2k Tecna type 4602 16 KVA bewi 50 % ED
AEG 63KVA AEG 63KVA
more images
2
1969
ready for operation (used)
The AEG spot welding machine is parallel running and therefore not only suitable for spot welding but also for fastener (screw) welding. Water cooled industrial machine with 63KVA power adjustable in several steps, pressure indication in Kg B90nqfpuxm
Spot welding machine from prototyping for sale. Has been used very little. Can also be shipped. More info on request B0z7sbfk
Schlatter 1MX121T25/P1 Schlatter 1MX121T25/P1 Schlatter 1MX121T25/P1 Schlatter 1MX121T25/P1 Schlatter 1MX121T25/P1
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
1976
used
Spot welder, spot welder, spot welder, spot welder F3xuhub -Stationary -Operation by hand switch -Arm length welding machine: 350 mm -Welding gun type: -Control -Dimensions machine: 1500/1000/H1670 mm -Weight machine: 774 kg -Dimensions control cabinet: 1550/420/H1960 mm -Weight control cabinet: 330 kg
Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV Schlatter PS 200 LV
more images
12
Call
Tatabánya Hungary
8572 km
unexamined (used)
Manufacturer: Schlatter B9eqtrgm9s PS200 LV The device has not been tested! for sale in the pictured condition!
DALEX PL 80_EH DALEX PL 80_EH DALEX PL 80_EH
more images
3
Call
Korb Germany
7958 km
refurbished (used)
Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10 beta (5-times, 8-program) --- Extra Equipment: - foot pedal Qimtp - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock
DALEX PMS 10-2 DALEX PMS 10-2
more images
2
Call
Weiterstadt Germany
7845 km
used
Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz Sjgpejit open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg
Düring Schweisszange X100 Düring Schweisszange X100 Düring Schweisszange X100 Düring Schweisszange X100 Düring Schweisszange X100 Düring Schweisszange X100
more images
6
Call
Sassenburg Germany
7790 km
2018
as good as new (ex-display)
Düring X100 welding gun from Audi test laboratory. Pliers is unused, therefore as good as new. Type designation: X100 RX SM 10 18 27 Drive designation: SEW CMP63L/BK/PK/RH1X/SB1X Bceffqzq Transformer designation: Bosch PSG 6130.00 RSTK Rated power: 100 kVA Tong weight: 115kg Test and measurement reports from Düring available. Drawings are also available.
DALEX SF 25-1 SWA2 DALEX SF 25-1 SWA2
more images
2
Call
Gebhardshain Germany
7746 km
excellent (used)
foot operated, water cooled swing lever spot welding machine Itldz0fbg make DALEX type SF 25-1 SWA2 rated power at 50 % ED: 25 kVA sec. short-circuit current: 22,4 kA Sec. open-circuit voltage: 5.2 V electrode force: 278 daN equipped with: Swivel armature for arm distance up to 550 mm projection: 700 mm add-on switch cabinet according to VDE 0100 main switch synchronous welding control 1/01 TT
Dalex PMS 11-2 Ausführung A Ausladung 550 mm
more images
1
Call
Baden-Württemberg, Deutschland Germany
7969 km
1995
good (used)
Spot welding machine Manufacturer: Dalex Type: PMS 11-2 Version A Year of manufacture: 1995 throat: 550 mm B3wm7v2 Power: 80 kVA Connected load: 128 KVA Operating current: 10,3 kA weight: approx. 460 kg with auxiliary welding control B200 roller conveyors right / left
KUKA MZ30 KUKA MZ30 KUKA MZ30 KUKA MZ30 KUKA MZ30 KUKA MZ30 KUKA MZ30
more images
7
Call
Holzheim Germany
8067 km
used
Kuka - Spot welding machine Type: MZ30 Bpluxpb7 Make No.: 103 Apparent power: 30 kVA Connection data: 380 V / 80 A
DALEX 3328-5 DALEX 3328-5 DALEX 3328-5
more images
3
Call
Korb Germany
7958 km
refurbished (used)
Power rating at 50%: 25kVA Short-circuit current: 22,5kA Electrode force: 600daN weight: 51,5kg --- with Electrode arm 170mm --- option welding contro B200/MPS1036 --- Iydvnv8rc warranty: 6 months
Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S Tucker  TSG 2000 PE1S
more images
12
Tucker TSG 2000 PE1S stud welder Tucker TSG 2000 PE1S Stud welding unit 400 V 50 Hz Oawcp 32 A More articles - new and used - can be found in our store!
TECNA 8005 TECNA 8005 TECNA 8005 TECNA 8005 TECNA 8005 TECNA 8005 TECNA 8005 TECNA 8005
more images
8
Call
Spøttrup Denmark
7443 km
1991
good (used)
Large spotwelder with watercooling tank, pump ect. Hmrftxr Transport can be arranged.
DALEX PMS 11-4 G 3 DALEX PMS 11-4 G 3
more images
2
Call
Gebhardshain Germany
7746 km
excellent (used)
Direct current 3-phase spot welding machine Make DALEX Type PMS 11-4 G3 special design for Al-letter production throat 750 mm B8q0rl2gzn rated power at 50 % ED: 60 kVA Sec. short-circuit current: 25 kA Sec. open-circuit voltage: 3.68 V special electrode force cylinder 20-120 daN rotatable water connection on the upper electrode holder weight 685 kg with add-on control cabinet according to VDE 0100 main switch synchronous welding control 8036
Dalex PMS 11-2 Ausführung A Ausladung 750 mm Dalex PMS 11-2 Ausführung A Ausladung 750 mm
more images
2
Call
Baden-Württemberg, Deutschland Germany
7969 km
1995
good (used)
Spot welding machine Manufacturer: Dalex Type: PMS 11-2 Version A Year of manufacture: 1995 throat: 750 mm Power: 80 kVA Connected load: 128 KVA Operating current: 10,3 kA weight: approx. 460 kg B7o37wglsw with auxiliary welding control B200 roller conveyors right / left
DALEX Punktschweißmaschine    PMS  11-4 DALEX Punktschweißmaschine    PMS  11-4
more images
2
Call
Hof Germany
7762 km
refurbished (used)
Spot welding machine PMS 11-4 Rated power at 50% ED 100 KVA Cylinder: EH 100-600 daN Sec. short circuit current: 43 KA throat: 550 mm B8ns7ip8rw Pressureless lowering. Water control switch Main switch Version B For foot switch or start panel.
CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA CEMSA  THETA 50 kVA
more images
9
Call
Tatabánya Hungary
8567 km
2002
good (used)
Product: Cemsa Tip: Theta 450/50 Year of manufacture: 2002 Power: 50 KVA Cinbcyeo
Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S Tucker  TSG 2000 PE3S
more images
12
Tucker TSG 2000 PE3S stud welder Tucker TSG 2000 PE3S Stud welding unit 400 V 50 Hz 32 A Gmpxaf9vc More articles - new and used - can be found in our store! International shipping
KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA) KUKA K 15/ P (15 KVA)
more images
12
Call
Mörsdorf Germany
7965 km
1972
unexamined (used)
spot welding machine make KUKA type K 15/ P works no. 177, year of construction 1972 Technical data: Nominal power at 50% ED 15 kVA Connected load 32 kVA Electrode force from 50 - 200 kp Nominal primary voltage and frequency 380 V, 50 Hz Throat 320 mm Nfa09 Open circuit voltage 1.7 - 3.0 V in 6 steps Operating current at 50% ED 5 kA Secondary short circuit current 18 kA with - Control Rö 533 TA - Foot switch used, untested - SPECIAL PRICE
DALEX PL 63 DALEX PL 63
more images
2
Call
Gebhardshain Germany
7746 km
excellent (used)
air-operated, water-cooled spot welding machine make DALEX type PL 63 with parallel guide with single stroke cylinder throat 250-550 mm arm distance 150 or 310 mm Yuru00 rated power at 50 % ED: 63 kVA Sec. short-circuit current: 31,5 kA Sec. open-circuit voltage: 7.04 V electrode force: 65-390 daN with add-on control cabinet according to VDE 0100 Main switch Synchronous welding control 1033 Example photo Machine is in reconditioning
Soyer KTS 800 CNC Soyer KTS 800 CNC Soyer KTS 800 CNC Soyer KTS 800 CNC Soyer KTS 800 CNC Soyer KTS 800 CNC Soyer KTS 800 CNC Soyer KTS 800 CNC Soyer KTS 800 CNC
more images
9
Call
Trittau Germany
7709 km
excellent (used)
CNC - Spot welding machine Fab. SOYER Typ. KTS 800 CNC Very good condition Technical details: Make: SOYER Type: KTS 800 CNC Year of manufacture: probably 1998 Control: Engelhardt clamping area: 900 x 700 mm working range X-axis: 800 mm working range Y-axis: 600 mm Welding head infeed stroke: 120 mm (pneumatic) Welding head height adjustment: 140 mm (manual via hand crank) Feed speed: max. 12000 mm/min. Welding system: tip ignition welding stud diameter: 3 - 8 mm welding stud length: 6 - 35 mm We...
DALEX PMS 10-4/T DALEX PMS 10-4/T DALEX PMS 10-4/T
more images
3
Call
Korb Germany
7958 km
refurbished (used)
Power at 50%: 32kVA Short circuit-current: 30,3kA Electrode force: 65-390daN / single stroke Throat depth: 200mm --- Weld control: MPS 10 beta (5-times, 8-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months Hatuwez --- Spotwelding electrodes + spare parts at stock
CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50 CEMSA THETA 450/50
more images
10
Call
Tatabánya Hungary
8567 km
2000
good (used)
Product: Cemsa Tip: Theta 450/50 B7oyrkmrx9 Year of manufacture: 2000 Power: 50 KVA
TECNA 3470 TECNA 3470 TECNA 3470 TECNA 3470 TECNA 3470
more images
5
Call
Spøttrup Denmark
7443 km
ready for operation (used)
Fully functional. H9hq2s2n Incl. some accessories and stand for welder handle. Transport can be arranged.
Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T Elmatech Premiumspot Vision QSVM 9000/12000T
more images
15
Call
Magdeburg Germany
7873 km
2017
excellent (used)
Spot welder Elmatech Premiumspot Vision QSVM 9000/12000T Mfrd. 2017, little used very good condition, various accessories. B7sumxrvts Material thickness 7.5 mm, length 800 mm, 400 V, 32 A, power consumption max.130.0 kVA, power consumption, eff 20 kVA, control range: 0 - 13 kA, switching steps self-regulating/stepless, no-load voltage 12.5 V DC ,device cooling: WF, coolant tank 20 liters, working pressure 8 bar, contact pressure, max. 5.5 kN, welding current, max. 13,000 A, With aluminum program...
DALEX PMS 11-4 DALEX PMS 11-4 DALEX PMS 11-4
more images
3
Call
Gebhardshain Germany
7746 km
excellent (used)
Spot welding machine with single lift cylinder make DALEX type PMS 11-4 throat: 350 mm rated power at 50 % ED: 100 kVA Sec. short-circuit current: 51,7 kA Sec. open-circuit voltage: 6.75 V electrode force: 100-600 daN with add-on control cabinet according to VDE 0100 Main switch Synchronous welding control MPS 8043 IQ with welding current monitoring Jejvgl3z Machine is in reconditioning
MESSER GRIESHEIM PFU 10 MESSER GRIESHEIM PFU 10
more images
2
Call
Dortmund-Wambel Germany
7679 km
good (used)
Max. welding power 20 kVA Short circuit power 25 kVA Nominal power at 50 % ED 10 kVA Gut8i7z Throat 500 mm Max. Secondary short circuit current 10 KA Connected load 15 kVA Dimensions W x D x H 400 x 1100 x 1150 mm Weight 200 kg Accessories / Special features: - Water cooling by external connection - Adjustable current time 0 - 10 - Adjustable electrode force by adjusting the spring - Mechanical foot switch Note / Reference value: With a max. secondary short-circuit current of 10 KA, a max. sheet...
Kuka MET 70 R Kuka MET 70 R Kuka MET 70 R
more images
3