Used Brushing machines for sale (101)

VIET

€28,000

COSMA fladder machine 1300 - S - 30 - V4

Call

Condition: ready for operation (used), Technical characteristics 3 groups of rubber rollers 1350 mm 28080 Useful height 3-160 mm 1st roller Ø 180 mm 90 sh 2nd roller Ø 240 mm 65 sh 3rd roller Ø 280 mm 45 sh 3 suction nozzles Ø 150 mm 2 motors 18.5 and 11 kW Feed speed 3-16 m/min Belts 2620 x 1380 mm Rollers for belt entry and exit Automatic thickness gauge with pass adjustment SCS control panel with digital rib adjustment, feed speed adjustment on variator and management of sanding groups Power and Motors Voltage: 400 V Overall dimensions Weight: 3560 Kg

more

Listing

Someren

7,584 km

COSMA borstelfabriek holland

€7,800

Call

Condition: excellent (used), Year of construction: 2005, Cosma brush machine, 4 sanding motors above, 2 sanding motors below. Dusting top and bottom. All motors can be frequency controlled 6,9 m long, panels of 1.3 meter wide can put through the machine. Dldsnr Plus extraction unit, mounted at this moment above the machine, but can put anywhere . very good condition. For the last 8 years, the machine has only been used once every 2 months for a very short period of time. therefore now on sale

more

Listing

Delbrück

7,719 km

Mink brushing machine

Mink

€2,800

Grinder, brush, antiquing machine

Call

Condition: used, - the plates can be cleaned from below and above - 1050 mm plate width - 10-28 mm plate thickness - feed speed adjustable - with small control box Ckeydrnymo - with automatic spraying of cleaning agents

more

Listing

Sierakowska Huta

8,052 km

Cattinair EP2M-188-2

€8,200

Call

Condition: excellent (used), CATALOG NUMBER 6051 TECHNICAL DATA - the width of the pulling belt 1300mm - max width of the workpiece 1250mm - max height of the workpiece 60mm brush aggregates: - 2 rollers with brushes: 1 for aging, 1 for polishing - brush diameter 260 / 300mm - brush length 1250mm - brush spindle diameter 32mm - brush motors 2 × 2.6 kW - reducer motors (servomotors) 2 × 0.55kW - rotation of brush rollers 300-1000 rev / min - blowing off the brushes - electric grinding height adjustment brush oscillation: - oscillation / stroke of the brushes - 45mm range - drawing belt feed 1.5-7.5 m / min - 0.75kW pulling belt motor - blowing off the 0.75kW tape - 7.5 kW vacum pump - compressed air 6 bar - diameter of the extraction port 120, 160, 220, 310mm Vwlvsa - dimensions length / width / height 2060x2000x2050mm - weight about 2000 kg ADVANTAGES - French production - unpainted - equipped with 1 steel wire head for aging - giving structure to wood and 1 grinding wheel for grinding and polishing in wood - vacum pump - servomotors - the speed of each brush can be set separately - used grinder, very good condition Net price: PLN 36 900 Net price: 8200 euros depending on the price, 4.5 euros (Prices may vary with higher fluctuations)

more

Listing

D - Hessen

7,829 km

Holzkraft STR 62 L

Call

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Designed for professional structuring and grinding work Motorized height adjustment of the working aggregates with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Infeed height constant Models str l with infinitely variable, inverter-controlled brush speed: this allows the speed to be precisely adapted to the material, making it particularly suitable for sensitive materials. Crw9qaaxbz Working width: 600 mm Max. Workpiece height: 300 mm Max. workpiece weight: 100 kg Feed belt speed: 1 13 m/min Motor power: 2 x 4 kW Working tool Ø: 240 mm Working tool length: 600 mm Working tool rotation: 100 1500 min-1 dimensions (L x W x H) approx.: 1300 x 1300 x 1550 mm suction nozzle diameter: 2 x 150 mm Weight approx.: 730 kg Availability: short term Storage location: Hochheim

more

Listing

Wang

8,343 km

Rapha Systems RBM 1500

Call

Condition: new, Year of construction: 2023, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 1500 F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. No7uf The RBM 1500 is with an automatic size and Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm

more

Listing

Nevers

(dealership location)

7,693 km

Wide belt sander

PL/TP

€6,500

Fladder SC 300 Finish & Brushing Machine

Call

Condition: ready for operation (used), Technical characteristics Useful width : 1100 mm Usable height : 3 to 160 mm Digital height display Feed speed : 2 to 18 m/min 1 combined roller + pad sanding unit Height detector Outfeed antistatic brush unit Vacuum rubber mat Uudhvpg Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

more

Listing

66140 Malax, Finnland

7,604 km

Fladder SC 300 / 1000

€9,900

Call

Condition: good (used), Year of construction: 1991, Fladder SC 300 / 1000 finishing and brushing machine Year of manufacture 1991 Manufacturer Fladder System Denmark S/N 560 Machine height 2210 mm Crv2da3pdu Machine width incl. carousel 4000 mm Machine length incl. carousel 4500 mm working height carousel 800 mm Working width 1200 mm Max. Workpiece height 100 mm throughput speed 0,3 - 10,0 m/min. lock-itTM spindles and length 6 x Ø100 x 350 mm Voltage 3 x 400/500V - 50/60Hz Max./min. Fuse 32 A Max. Power consumption 15 kW Suction 2500 m3/h Net weight 1700 kg

more

Listing

Biertowice

8,475 km

brush machine

QuickWood System QL 8

€9,200

Ageing machine, brush machine

Call

Condition: excellent (used), working width 300mm working height 100mm four side working double brushes on the side manual regulation of working dimensions Bhoydipp3gw variable regulated brush speed variable regulated feeder counterwise work of brushes

more

Listing

Naprawa

8,496 km

Angomac 400

€6,780

Brushing and structuring machine

Call

Condition: used, Technical data: Flx9ddye Working width: 400 mm Maximum workpiece height: 350 mm Motor power: 2x4 kW Feed speed: 4-16 m/min Power supply: 400 V Extraction spigot diameter: 150 mm Manual height adjustment of the working unit Independent adjustment of the first and second working unit Safety switch 2 brushes included Machine dimensions: Length: 1900 mm Width: 1100 mm Height: 1600 mm

more

Listing

Aalen

8,001 km

VOLPATO SPO 600

Call

Condition: new, Year of construction: 2023, No. 04377 Brushing and structuring machine VOLPATO SPO 600 Year of construction 2023, new, immediately available, made in Italy Pgglajt VOLPATO has been building grinding machines for over 60 years Working width 600 mm Machine open at the side for double pass and double grinding width of 1200 mm Electric height adjustment of both units independently of each other Maximum grinding height 330 mm (360 mm) depending on brush diameter both brushes tilt 0-10° (20°) Maximum diameter of brushes 320 mm Brush rotation infinitely adjustable 180 - 600 rpm Change of direction of rotation of the brushes possible Electric height adjustment 0 - 330 mm with Siko indicators Brushes are stored on round bars with a diameter of 90 mm each with linear guides Infinitely adjustable feed speed of the conveyor belt Table height thanks to adjustable feet 800-850 mm Suction nozzle 2 x 180 mm EMERGENCY STOP BUTTON Motor power of the grinding units 2 x 4 kW Motor power of the conveyor belt 0.55 kW Table dimensions 2000 x 860 mm Includes 1 steel wire and 1 Tinex plastic brush, each 250 mm diameter, 80 grit NET WEIGHT 700kg CE declaration of conformity Operating instructions in English Brush units inclined up to 20 ° with respect to the direction of movement = when the wood rusts, the veins are also highlighted transversely thanks to a helical action of the brushes The machine has 3 inverters, one for adjusting the belt speed and 2 for the brush units = many finishing configurations available Double direction of rotation of the brushes 4kW motors with belt transmission giving double torque to the brush units The images serve as an example and represent an identical machine Transport dimensions approx. 2100 x 1300 x 1900 mm LWH Weight 750kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition According to the manufacturer, the warranty is 1 year after delivery Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

more

Listing

Wang

8,343 km

Rapha Systems RBM 2000

Call

Condition: new, Year of construction: 2023, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 2000 F e a t u r e s • eight-head rotary brushes • Spiral brush to remove loose glue residues • Infeed inclined roller conveyor with separation • Modem for remote maintenance O p t i o n s • Conveyor technology with application belt and angle transfer • Outflow roller conveyor with buffer function • Deionization of furniture fronts after cleaning A d v a n t a g e s • Chaotic occupancy due to automatic adaptation to the front thickness and size • Up to 4000 parts / 8 h The RBM 2000 is a brushing machine for film-coated 3D Furniture fronts. The proven eight-head rotary brush system removes the glue overspray on the backs of the furniture fronts and thereby achieves optimum edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled put on and the backs of the fronts clean. Remaining loose glue residues are removed by a spiral brush. The RBM 2000 is designed for a capacity of up to 4000 parts per shift. This makes the machine the ideal brush system for medium and large productions. The RBM 2000 is equipped with automatic size and thickness recognition of the furniture fronts. This allows adaptation to chaotic loading without loss of time in the flow. The flexible control offers the possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 2000 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 14 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 4000 parts in 8 hours Standard parts of 650 x 400 mm Bfph9k7ben

more

Listing

Nevers

(dealership location)

7,693 km

VIET VIET Challenge 333 TM

€29,500

Brushing machine / Structuring Machine

Call

Condition: ready for operation (used), Technical characteristics Fixed-table large belt sander Useful width : 1350 mm Useful height : 3 to 160 mm Juxulno87z Programmable digital display 3 x 320 mm diameter rollers : 1st roller 90 Sh ; 2nd roller 60 Sh ; 3rd roller 45 Sh 3 x 11 kW motors (1 for each sanding roller) 2 anti-static brush units at output Belt dimensions : 2620 x 1380 mm Variable feed 3 to 20 m/min Motorized raising/lowering Automatic height sensor Compressed air required : 6 bar Suction speed required : 25 m/s Machine sold with infeed and outfeed roller tables : Infeed conveyor : 3500 x 2000 mm Outfeed conveyor : 3500 x 2000 mm Ideal for solid, veneered and varnished wood panels, worktops, doors, windows, etc. Power and Motors Voltage: 400 V Pluging: Three-phased Power: 40 Kw Motor: 3 x 15 CV Overall dimensions Width: 2900 mm Weight: 4800 Kg

more

Listing

Barntrup

7,743 km

TES

Call

Condition: ready for operation (used), Year of construction: 2009, Brushing machine / Structuring brushing machine make TES Machine comes from a parquet production Year of manufacture 2009 Working width 1150 mm 2 brush units, currently with brass trimming for structuring Bhwsqlvmwho Electric height adjustment total connected load 25 kW The machine is technically checked and cleaned when ordered.

more

Listing

Grońsko

8,095 km

fladder brush grinder

Fladder 300/AUT 1000

€4,850

Call

Condition: excellent (used), Brush grinder fladder 300 working width 1000mm 6 grinding brushes 4KW main motor vacum pump holding material 7,5KW feed rate continuously adjustable 3ddssckw It is known that the surface of wood becomes rough after varnishing. The reason for this is the fibers , which shear with normal sanding of wood During the subsequent varnishing there is a tension of the fibers , which rise and cause the surface of the wood to become rough. Therefore, it is necessary to concentrate on the fibers. The fibers should be reduced or eliminated effectively before or after varnishing. The solution is the FLADDER sanding system, a sanding method that is based on a different sanding basis. Instead of sanding with continuous pressure on the surface of the workpiece to be sanded, the FLADDER system is based on the premise that the aggressiveness of the sanding is created with the speed of the sanding tools. Grinding of the workpiece is done in a circular motion with 6 grinding spindles that rotate clockwise. This means more uniform grinding of profiles and at the same time the wear of grinding tools is uniform. The device can be modified and used in both the wood and metal industries

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

7,593 km

HOUFEK Twingo 600

€8,500

Brushing and structuring machine

Call

Condition: good (used), Year of construction: 2016, Brand: Houfek Model: Twingo 600 C0tpcya83l Serial number: FB-437 Year: 2016 Tech data: Work width max: 600mm Min workpiece length: 350mm Max workpiece weight: 60kg Diameter of the brush: 120-300mm Brush length: 600mm Diameter of side brush: 150-230mm Length of side brush: 150mm Clamping shaft diameter: 40mm Shaft rpm: 1140 Shaft rpm with frequency converter: 180-1000/300-1900 Side brush shaft rpm: 950 Brush motor output: 4Kw Side brush motor output: 0,55Kw Output of feeding belt motor: 0,43Kw Feed belt speed: 4,5/9 m/min Oscillation Suction neck diameter: 120mm Suction neck diameter of side brush: 100mm Total machine dimension (lxbxhx): 1610/760/1700 mm Weight: 840kg Stock nr: 2001512

more

Listing

Aalen

8,001 km

VOLPATO SPO 600

Call

Condition: new, Year of construction: 2023, No. 04376 Brushing and structuring machine VOLPATO SPO 600 / NEW Year of construction 2023, new, immediately available, ex warehouse 73433 Aalen Made in Italy - VOLPATO has been building grinding machines for over 60 years Working width 600 mm Machine open at the side for double pass and double sanding width of 1200 mm Maximum grinding height 330 mm (360 mm) depending on brush diameter Manual brush height adjustment Both brushes tiltable 0 - 10° (20°) Both brushes can be swiveled individually Maximum brush diameter 320 mm Brush rotation infinitely adjustable 180 - 600 rpm Gz7q3uz Change of rotation direction of the brushes possible Brushes are mounted on round bars, each 90 mm in diameter, with linear guides Infinitely adjustable feed speed of the conveyor belt Table height with adjustable feet 800 - 850 mm Extraction connection 2 x 180 mm EMERGENCY STOP BUTTON Motor power of the brush units 2 x 4 kW Motor power of the conveyor belt 0.55 kW Table dimensions 2000 x 860 mm Including 1 steel brush and 1 tinex brush, each 250 mm Ø, 80 grit CE Declaration of Conformity Operating instructions in English - Brush units inclined by up to 20° with respect to the direction of movement = when the wood rusts, the veins are also highlighted transversally thanks to a helical action of the brushes - The machine has 3 inverters, one to adjust the belt speed and 2 for the brush units = many finishing configurations available - Brushes rotate in two directions - 4kW motors with belt transmission giving double the torque to the brush units Transport dimensions approx. 2150 x 1250 x 1600 mm LWH Weight 720kg Visitation on site possible by appointment Technical information, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale The manufacturer's warranty regulations apply to new machines Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: from stock

more

Listing

Verl

7,711 km

Buffing Brushing machine

Gmatick Roba Profi Clean

Call

Condition: new, Year of construction: 2021, Cleaning method The Roba Profi Clean machine line guarantees as a through feed solution high productivity. As a stand-alone solution for large quantities or directly behind the turnover/backside trimming equipment of a thermos foiling line. The only solution that is able to feed a complete batch of doors coming out of a membrane press. During this operation the laminated fronts get cleaned from glue residues and simultaneously all four edges are slightly rounded without the risk of delamination. Therefore the parts do not require any further processing steps and can be forwarded directly to the packaging. This is ensured by two or four clockwise and counterclockwise working cleaning drums, which are equipped with special cotton brushes. Further on this machine is also able to show its high capability in the cleaning of all other laminated furniture parts. Roba Profi Clean Operation areas • Backside cleaning of thermo-foiled doors • Cleaning of laminated furniture panels The Roba Profi Clean as through feed solution guarantees high productivity with best cleaning results. Advantages of the Roba Profi Clean principle: • Optimized cleaning from dust and glue residues • Optimal rounding of sharp edges Roba Profi Clean equipped with two double brush cleaning Aggregates Double brush aggregate work clock- and counter- clockwise, equipped with special cotton brushes for secure cleaning. Bhsogu2i9m The Roba Profi Clean is suitable for cleaning of all kind of laminated furniture parts

more

Listing

Nevers

(dealership location)

7,693 km

Wide belt sander

SCM SANDYA 5 RCS

€13,800

Call

Condition: ready for operation (used), Technical characteristics Motorized raising / lowering Maximum working width : 1100 mm 1st stainless steel roller 2nd rubber roller 65 SH One motor 7,5 kW for both rollers Sanding unit with shoe Feeding speed 4,5 9 m/min Working height : 3 to 170 mm Power and Motors Bgchqbsjb8f Voltage: 400 V Pluging: Three-phased Power: 9 Kw Overall dimensions

more

Listing

Biertowice

8,475 km

Brusher

Quickwood Pro 800

€9,900

Call

Condition: excellent (used), working width 800mm rotor with 4 brushes variable regulated feeder variable regulated rotor speed 9azxjp7 variable regulated brushes speed electric regulation of height vacuum table

more

Listing

San Giovanni Al Natisone

8,394 km

€250

Brush-beater machine WPC 400

Call

Condition: used, Brushing machine with 1 head and feed Dmmfxl

more

Listing

Juszczyn

8,483 km

WPC 400

€11,300

Call

Condition: excellent (used), Brush-beater machine WPC 400 Working width 400mm 4 brushing units 7bo2okmibq Stepless feed regulation on the variator Electrical raising and lowering of the work surface Digital height readout Each brush on separate motor Power 4×5.5kw 3 spare brushes Brushes diameter fi 200mm Overall dimensions of the machine 206x82x187cmH Weight 1200kg

more

Listing

Aalen

8,001 km

Brush grinding machine

Leif & Lorentz B 4

Call

Condition: used, No. 04383 Brush grinding machine Leif & Lorentz B 4 Used 2 brush units with 2 speeds each Dmojup Equipped with 2 used brushes Processing width 700 mm Height adjustable up to approx. 100 mm Powered feed belt Feed continuously up to 18 m/min Transport dimensions approx. 2450 x 1100 1800 mm LWH Weight approx. 300 kg In order to avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus statutory. VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

7,593 km

MC LI-2DISC

€7,500

Stainless steel wide belt sander

Call

Condition: good (used), Year of construction: 2012, Brand: MC Model: LI-2DISC Machine no: 125/12 Year: 2012 Tech data: Working width: 1090mm Bttwzn2yh Dimensions of rolls: 1050x70mm Roller speed: 40-650rpm Speed: 0-13m/min Motor: 5kw, 50Hz, 400V, 3-phase Motor for rollers: 0.75Kw, 50Hz, 400V Machine dimension (lxwxh): 2200x1600x2100 Weight: 1280Kg Stock no: 2001696

more

Listing

Nevers

(dealership location)

7,693 km

BUTFERING PRIMA K13

€14,000

Call

Condition: ready for operation (used), Technical characteristics Top sanding Digital height display Usable width : 1300 mm Max. usable height : 160 mm 1 rubber roller unit (90 shore) 1 antistatic brushing unit Power and Motors Voltage: 380 V Pluging: Three-phased Cuzd8kx9hm Overall dimensions

more

Listing

Biertowice

8,475 km

Brusher

Kusing K2 - 400

€9,000

Call

Condition: excellent (used), Year of construction: 2019, working width 400mm two brushes variable regulated feeder separate regulation of heads Bgabubftah3 total power 6,55kW weight 650kgs

more

Listing

San Giovanni Al Natisone

8,394 km

€500

Call

Condition: used, Handcrafted 2-head brushing machine. Pnbygi9o

more

Listing

Kirchberg an der Pielach

8,369 km

Ernst

€3,950

Structuring and Brush Sanding Machine

Call

working width: 1,250 mm, pass-through height: 90 mm, pass-through width: 1,250 mm, total length: 190 cm, total width: 245 cm, total height: 200 cm, Condition: used, Brushing machine for wood grinding machine Conveyor belt width 1250mm width 2450mm length 1900mm Height 2000mm Jgv2lvkm

more

Listing

Schwanberg

8,445 km

structuring brush

SCM formula str 62 r

Call

Condition: new, Year of construction: 2023, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. 7xvei2mhy • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

more

Listing

Barntrup

7,743 km

Cosma

Call

Condition: new, Structuring and Brush Sanding Machine make Cosma brush sander machine with 6 units for structuring and sanding of planks, profiled wood and solid wood floors of any kind working width 420 mm work piece dimensions: length: 700 mm - theoretically infinitely width: approx. 50 - 420 mm height: approx. 9 - 90 mm equipped with: 5x structuring unit, H9rfwyddvz electrical height adjustment per brush, mechanical height indication, motor 3 kW each with a fixed speed of 1500 rpm for structuring 1x sanding unit, electrical height adjustment per brush, mechanical height indication, Inclined. motor 0,55 kW frequency controlled (infinitely variable speed) for sanding work piece transport via conveyor belt "High Grip", motor 0.37 kW, frequency controlled (infinitely variable, approx. 4 - 16 m/min.) control panel in the infeed of the machine with - display and adjustment of the feed speed - on/off of the individual units - height adjustment of the units - motor ampere display for the structuring units machine with cabin/enclosure of the units suction connections: 8x 150 mm diameter working height: 900 mm electrical connection: 63 Amp. 3 Ph 400 V + 0 brush facing OPTIONAL

more

Listing

Nevers

(dealership location)

7,693 km

VIET Challenge 211A RR

€13,000

Call

Condition: ready for operation (used), Technical characteristics Sanding on top Useful width : 1100 mm Useful height : 4 to 160 mm, digital display 2 Rollers : 1st roller diameter 175 mm, 90 Sh; 2nd roller diameter 240 mm, hardness 60 Sh 1 11 kW motor for both sanding units Belt dimensions : 2620 x 1130 mm Feed rate 3 to 15 m/min (variator) Motorized raising/lowering Automatic height sensor Power and Motors Voltage: 400 V Pluging: Three-phased Power: 15 Kw Motor: 15 CV Overall dimensions Cvnt9dafau Lenght: 1800 mm Width: 1600 mm Height: 2400 mm Weight: 1540 Kg

more

Listing

Biertowice

8,475 km

Brusher

Quickwood RO1300/1

€9,900

Call

Condition: excellent (used), working width 1300mm rotor with 4 brushes edge brush outfeed brush variable regulated feeder variable regulated rotor speed variable regulated brushes speed Rai2dr2e elecrtic regulation of height

more

Listing

San Giovanni Al Natisone

8,394 km

Camam SAW 91

€1,500

Rotating brushing machine

Call

Condition: used, Year of construction: 1999, Automatic brushing machine for heads, brand Camam, model SAW 91, serial number 99005, year of construction 1999, used, tested 97admovtoc

more

Listing

Oirschot

7,553 km

QuickWood System RO 1300 /1

Call

Condition: good (used), Year of construction: 1999, Well-functioning brushing machine The machine is complete, but not equipped with tools Working width approx. 1300mm. Hgdzdobeyb

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

7,593 km

Denibbing sanding machine

Quickwood RO 1400

€7,000

Structuring and Sanding Machine

Call

Condition: ready for operation (used), Year of construction: 1993, Brand: Quickwood Model: RO 1400 Machine no: 2106 Year of manufacture: 1993 Tech info: Isqv3we Working width: 1400 mm Vacuum in the carpet 2 carousels with 4 brushes in each Electricity up and down Variable feed rate Adjustable speed of the sanding heads Stock no: 2001593BXM

more

Listing

Barntrup

7,743 km

Cosma 400

Call

Condition: as good as new (ex-display), Year of construction: 2019, Structuring and Sanding Machine / Brush Sanding Machine make Cosma type 400 Year of manufacture 2019 Combination machine for sanding and structuring - universally applicable! Ideal for solid wood flooring, terrace boards, facade boards... Working width 400 mm 1x structuring unit / brush for structuring, 2.2 kW, speed 1000 rpm 2x sanding aggregate / brush for sanding, 10° angled structure, 0,37 kW, speed 200 - 700 rpm H78onjx7fd Electrical height adjustment of the brushes Mechanical height indicator Conveyor belt "High Grip", 0,37 kW Feed rate adjustable, approx. 3 - 15 m/min. Control panel with belt speed and brush height adjustment Incl. brushes

more

Listing

Nevers

(dealership location)

7,693 km

Long belt sander

Minimax LS3000

€2,200

Brush sanding machine Costa, grind from below

Call

Condition: ready for operation (used), Technical characteristics 4 kW motor Carriage length : 2500 mm Working width : 1100 mm Vertical table travel : 580 mm B0bcv3n9 Parallelogram sanding pad (350 x 140 mm) Belt length : 7100 mm Belt width : 150 mm Electric raising / lowering Suction outlets : 1 x ø 100 mm 1 x ø 140 mm Power and Motors Voltage: 220 V Pluging: Three-phased Power: 5 Kw Motor: 5,5 CV Overall dimensions

more

Listing

D - Nordrhein-Westfalen

7,694 km

Costa

Call

Condition: used, Year of construction: 2003, - Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW 8mp3hmfttg - voltage fluctuation max. +/- 5 %

more

Listing

San Giovanni Al Natisone

8,394 km

Call

Condition: used, Brush with 2 heads Ifrwndyny9

more

Listing

Arad

8,837 km

Sanding machine

Call

Condition: excellent (used), comec sanding machine for sale J0hv73r8

more

Listing

Staphorst

7,537 km

Brush sander

Cosma PL 1300 ZKBB

€8,500

Edge sander profiling machine

Call

Condition: used, Year of construction: 2015, machine/vehicle number: MR005261, Structuring sander, fabr. Cosma. Machine is ready to use and in good condition. Equipped with 1 unit with structuring brush and 2 units with sanding brushes. All units and the conveyor are frequency controlled, Cosma builds machines for structuring surfaces in various industrial production environments. Cosma machines can be found in the industry of; furniture, parquet, wall decoration, scaffolding wood, doors, garden wood, wall covering. Bc9ksogbc9b Technical specifications: - Max. workpiece width : 1300 mm - Serial number : 863

more

Listing

Nevers

(dealership location)

7,693 km

TECHNOLEGNO COMPACT 40

€16,000

Call

Condition: ready for operation (used), Technical characteristics Useful height : 100 mm 5 units Variable feeding speed : 5 to 25 m/min Workpiece feed by motorized vertical pressure chain 1st spindle router unit for profiling 4 belt sanding units on felt pads, adjustable and profileable Front support Control panel Cuzd7oeolj Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

more

Listing

Arad

8,837 km

Sanding machine

COMEC

Call

Condition: excellent (used), comec sanding machine for sale Dlszj2

more

Listing

Nevers

(dealership location)

7,693 km

Ecoline sander

Profil Sand 6

€12,000

Call

Condition: ready for operation (used), Technical characteristics Wood surface finishing machine, sanding of linear pieces, ideal for woodwork Useful width : 200mm Useful height : 120mm 1 Lateral unit (right and left cylindrical brush) C9yrawi 1 Upper unit (sanding disc + cylindrical brush) 1 Lower unit (sanding disc + cylindrical brush) Power and Motors Pluging: Three-phased Power: 11 Kw Overall dimensions Weight: 2600 Kg

more

Listing

Nevers

(dealership location)

7,693 km

SCM SCM WIN CS 63

€4,000

Call

Condition: ready for operation (used), Technical characteristics En cours de vérification Top sanding Useful width : 630 mm Nnxgdkfw Useful height : 140 mm 1 Roller diameter : 100 mm 7.5 kW motor Drive speed : 4.5 and 9 m/min Drive power : 0.55 kW Belt dimensions : 1525 x 630 mm Motorized raising/lowering Suction exhaust nozzle : 110 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 9 Kw Motor: 10 CV Overall dimensions Weight: 500 Kg

more

Listing

Nevers

(dealership location)

7,693 km

SCSB1100

€6,000

Call

Condition: ready for operation (used), Technical characteristics Top sanding Useful width : 1100 mm Useful height : 150 mm 1 Roller : Diameter 200 mm 1 15 kW motor Belt dimensions: 1130 x 1900 mm Feed 7 14 m/min Motorized raising/lowering Automatic height sensor 200 mm suction exhaust nozzle Bgchpgx9hv3 Power and Motors Voltage: 220 V Pluging: Three-phased Power: 15 Kw Motor: 20 CV Overall dimensions Lenght: 2100 mm Width: 1400 mm Height: 2100 mm Weight: 600 Kg

more

Listing

Nevers

(dealership location)

7,693 km

Long belt sander

- C3055

€500

Call

Condition: ready for operation (used), Technical characteristics Carriage length 2600 mm Cuzduqbfsl Working width 850 mm Parallelogram sanding pad (140 x 185 mm) Belt length 7000 mm Belt width 150 mm Suction fan (motor kW) and filter attachment 2 integrated bags diameter 220 mm Handles length 900 mm Power and Motors Overall dimensions

more

Listing

Nevers

(dealership location)

7,693 km

Long belt sander

- C3033

€2,000

Call

Condition: ready for operation (used), Technical characteristics Chassis length 2400 mm Electric lift Working width 850 mm Luvlav00ln Parallelogram sanding pad (150 x 200 mm) Belt length 7235 mm Belt width 150 mm Integrated vacuum fan (1kW motor) and 1 bag filter attachment Power and Motors Pluging: Three-phased Overall dimensions

more

Listing

Nevers

(dealership location)

7,693 km

SCM UNO

€6,800

Call

Condition: ready for operation (used), Technical characteristics Motorized raising / lowering Maximum working width : 920 mm 1 rubber roller 90 SH Motor 7,5 kW Feeding speed 4.5 9 m/min Working height : 3 to 160 mm V2z3kntk Power and Motors Voltage: 380 V Pluging: Three-phased Power: 9 Kw Motor: 10 CV Overall dimensions Lenght: 1500 mm Width: 1100 mm Height: 1700 mm Weight: 755 Kg

more

Listing

Nevers

(dealership location)

7,693 km

Belt sander

PS1

€3,800