Used Optimization Cross Cut lines for sale (50)

Listing

Request more images Request more images Already requested

3

Hardinxveld-Giessendam

7,508 km

Optimizing cross cutting saw

H&M HM-D

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2010, H&M optimizing cross cutting line, type HM-D Zlwydgdu - automatic cross infeed - push feed with calk line reader and length detecting - cross cut saw HM-D - digital controller - outfeed transpot

Price info Price info Already requested more

Listing

Sułkowice

8,474 km

Optimizing saw

Bottene Push 180

€35,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 2010, positioning speed 180m/min blade diameter 450mm motor power 5,5kW marerial loading system 8 pneumatic pushers B9ltscdynd

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Uničov

8,337 km

Optimizing cross cut saw

Störi Mantel UKS 850

€20,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: not inspected (used), Year of construction: 2015, Automatic optimizing machine , never used, repair required, service list of required components available, available one machine for Left and one for Right side operation...cost is per unit(one machine), required repair at value 13 000 € Vwb0be

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Kanzach

8,019 km

Sorting belt paddle ejector

DIMTER

Price info Price info Already requested Call

Condition: good (used), Paddle ejector for sorting belt Length: approx. 600 mm Working height: 850 mm Drive: Rexroth servo Dmv97d more available also other length

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

San Giovanni Al Natisone

8,394 km

THROUGHFEED LOADER

Friulmac FN3

Price info Price info Already requested Call

Condition: used, machine/vehicle number: 1656, SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - Min/max working length 250/1300 mm - Max working width 160 mm - Min/max working thickness 10/80 mm Ljhqjpr8tj - Production capacity : 0-50 psc / min - Diam. Blades 400 mm - S/N 1656

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Mariano Comense

8,154 km

CUT-OFF SAW machine model BOTTENE TE 500

BOTTENE TE 500

Price info Price info Already requested Call

workpiece weight (max.): 1,300 kg, Condition: excellent (used), CUT-OFF SAW machine model BOTTENE TE 500 second hand machine in very good working conditions machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various motorized infeed roller conveyor diam. blade mm. 500 engine power 7.5 Hp max. cutting size mm. 500 x 135(H) Bhefh3bkhai input motorized roller conveyor length mm.3000 outgoing roller conveyor length mm.3700 volt. 380/50 overall dimensions of the assembled machine: 6700 x 1200 mm overall dimensions for transport: 4000 x 1350 mm weight kg.1300

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Juszczyn

8,483 km

BOTTENE PUSH Optimizer 180

BOTTENE PUSH 180

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2014, BOTTENE PUSH Optimizer 180 G2j2tk

Price info Price info Already requested more

Listing

Oberkochen

(dealership location)

8,006 km

Optimization cutting saw

SALVADOR Superpush 200 Optimus -Video-

Price info Price info Already requested Call

Condition: new, saw-blade dia. 550 mm Cutting height 150 mm Motor output 7,5 kW Dimensions (L/W/H) 11300x1800x1800 mm SALVADOR SUPERPUSH 200 OPTIMUS, out of out exhibition room ----- Pusher saw with optimizing and failure recognizing and cutting Maximum entrance length: 6.200 mm Maximum thickness150 mm Maximum width 300 mm Cakh2mxlon Detailed description in german see pdf-file. Machine can be seen producing in our showroom! (technical details according to manufacturer - wihout guarantee!)

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Bad Wildbad

7,915 km

Optimizing chop saw Dimter

Dimter

€3,500

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Dimter cross-cut system for sawing and optimizing wood and subsequent sorting. Consisting of: * Infeed roller conveyor with marking station * Cross conveyor * Feeding * saw * Outlet with sliders * Compressor * For self-dismantling and collection. Cxbzlymnkg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

12

Karlholmsbruk

7,605 km

Circular Saws

Paul CNC-Control MAXI 5 premium

€115,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 2008, Used optimization line in working order. Line equipped for full use. The equipment consists of: - Lifting table; - Feed table to moulder; - Moulder: Nordmac NT6-23; Fojal8i - Feed for "drawing" - defect marking (human work, defects are drawn with fluorescent crayons); - Feed to the measuring station (PAUL); - Measuring station (PAUL); - Elongation station (PAUL); - Cut conveyor; - Unwinders (PAUL); - Sorting table; - Equipped with all the platforms needed to service the machine tools.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

San Giovanni Al Natisone

8,394 km

THROUGHFEED LOADER FRIULMAC

Friulmac FN3 1300

Price info Price info Already requested Call

Condition: used, Year of construction: 1999, machine/vehicle number: 2528, SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - Min/max working length 250/1300 mm Dmwepl - Max working width 160 mm - Min/max working thickness 10/80 mm - Production capacity : 0-50 psc / min - Diam. Blades 400 mm - S/N 2528 - Year 1999

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

8,244 km

Optimization crosscut saw

GreCon 2004

Price info Price info Already requested Call

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Bdficgegpzw Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Price info Price info Already requested more

Listing

Juszczyn

8,483 km

Omga T 2020 NC Optimizer Maximum

Omga T 2020 NC

€26,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Omga T 2020 NC Optimizer Maximum part thickness 120mm Maximum element width 320mm Minimum workpiece length 600mm Maximum feed rate 180m/min Saw motor power 5.5kw Feed motor power 7.5kw Maximum acceleration 15m/s Saw cutting cycle time 0.2-1sec Average number of cuts 80-90/min Maximum piece thickness 120mm Maximum piece width 320mm Minimum workpiece length 600mm Maximum feed rate 180m/min Saw motor power 5.5kw Feed motor power 7.5kw Maximum acceleration 15m/s Saw cutting cycle time 0.2-1sec Average number of cuts 80-90/min Zmcyale

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Treviso

8,344 km

Optimizing cutting saw

SALVAMAC SALVACUT 5000

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, New Optimizing saw SALVACUT 5000 by SALVAMAC Innovative high speed optimizing saw with optimization and elimination of wood defects, with double traction with upper rollers and lower feed belt with independent management. Bddjqbdemj3 From an idea of Salvador Christian.

Price info Price info Already requested more

Listing

Biertowice

8,475 km

Optimizing saw

Grecon Dimter S50

€29,900

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), infeed table 6,3m feeding speed max 60m/min 3zszinbo88 motor power 5,5kW cutting dimensions 300x100mm blade diameter 500mm Opticom Direct controller waste cutting

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Kanzach

8,019 km

Optimization crosscut saw

Weinig Dimter 350 - 4

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2004, Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Iap39dkc Machine ran without problems until dismantling Transport can be organized

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Brakel

7,764 km

Weinig OptiCut OC 50 S

WEINIG OptiCut OC S50

€37,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 2011, Very little used, with optimization, 6m machine, saw drive 7,5 KW, with marking roller Cj0zwxhdqc

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

13

Miechucino

8,056 km

Weinig Dimter OptiCut S 90 optimizer

Weinig Dimter OptiCut S 90

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2005, Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review Vlo9eink – German production – year of manufacture 2005 TECHNICAL PARAMETERS: max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

12

Gorzów Wielkopolski

8,027 km

Cross-cut saw Stromab TR500+Matrix 6000

Stromab TR500+Matrix 6000

€41,000

FCA ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2023, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Cu3mo7n0 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Send inquiry Send inquiry Already requested more

Listing

Treviso

8,344 km

Optimizing cutting saw

SALVAMAC SALVAPUSH 2000

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, New Optimizing saw SALVAPUSH 2000 by SALVAMAC The Salvapush 2000 comes with a brand new version of software that allows anyone to manage it in a simple and complete way like a smartphone, with a website graphic and all the practicality of setting data of a large touch screen, in digital communication between all the electronic components. New exclusive mechanical solutions are also present both for the cutting system and for that of the pusher, solutions that are demonstrating all their potential and flexibility at the customers where the machines work. From an idea of Salvador Christian. Bfxulyzsq9

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Biertowice

8,475 km

Optimizing saw

Grecon Dimter S50

€29,900

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), infeed table 6,3m Dja9xb feeding speed max 60m/min motor power 5,5kW cutting dimensions 300x100mm blade diameter 500mm Opticom Direct controller waste cutting

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

4

Kanzach

8,019 km

Sorting belt Sorting conveyor belt

Paul

€4,500

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Sorting plant, sorting conveyor belt, sorting behind an optimizing saw. Conveyor belt length: approx. 11,000 mm conveyor belt width: approx. 200 mm Bkzxixh working height: 800 mm Drive: 400 V 0,75 KW 6 pneumatic buffers

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Isola Vicentina

8,297 km

MITER SAW / CUTTING CENTER

MANFRED HULLINGHORST SLK 300

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2001, Miter Saw - Cutting Center model SLK 300 year 2001 Cstqjikbat Complete with automatic loading and unloading!

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Miechucino

8,056 km

Weinig Dimter Opticut 200 Classic

Weinig Dimter Opticut 200 Classic

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2004, Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt Hdshb7d full optimization total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Price info Price info Already requested more

Listing

Loštice

8,329 km

Cross-cut saw

Störi Mantel UKS 850 OPTIM

€79,000

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: like new (used), Year of construction: 2019, Operating hours: 7,853 h, machine/vehicle number: 21985009, Powerful optimizing saw UKS 850 OPTIM for optimization (defect cutting) and precise material cutting with a wide cutting diagram. The material (single pieces or in a bundle) is positioned in the cut by means of a tie bar. Input and subsequent selection of cutting lengths via touch screen. Control is provided by a powerful industrial computer. High accuracy of material positioning.  Motor: 11kW/ 15kW  Saw blade diameter: 600-800 mm  Max. cutting height: 210 mm  Material feed accuracy: +-0.5 mm  Material feed speed: 120 m/min  Extraction: 2 x 120 mm - 30 m/s Ckknzvyvsd  Working height: 850 mm  Infeed table length: 5.2 m  Electricity connection: 400 V/3/50 Hz  Integrated touch panel: YES  Control software: SM OPTIMAL

Send inquiry Send inquiry Already requested more

Listing

San Martino

8,334 km

Optical scanner for qualities and defect

CURSAL SCANNER CROSS-SCAN

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, OPTICAL SCANNER FOR QUALITY AND DEFECTS DETECTION – CONTINUOUS PRODUCTION VERY HIGH-SPEED Technological, intelligent and productive, Cross-Scan 4.1 is the best way to exponentially increase production rhythms, minimizing labour costs and accurately detecting characteristics and defects of wood. Byvonewu The automatic scanner exploits the potential of Cursal high-speed optimizing cross-cut saw TRV 2700EB 500. The Cursal cross-cut saws are fully equipped to put the scanner in line with other accessories, in order to complete the cycle. The scanner processes the board by detecting all the defects on the 4 faces, differentiating them according to the parameters set. Once scanning is complete, it calculates the best possible combination, with an optimization process, considering the inserted cutting list, and immediately transmits the data to the CNC of the cross-cut saw. The in-feed and out-feed of the boards consists in a system of low-wear CNC belts: pneumatic pressure wheels, aligning wheels at guide, pressure heads with idle wheels, control of the feeding sequence using consents. > DETECTABLE DEFECTS Knots-Cracks-Pitch pockets-Discolorations- Heartwood-Bark- Wanes-Dimesional defects-Wormholes. > PARAMETERS CUSTOMIZATION The parameterization for the detection of the various types of defect can be corrected, improved or perfected at any time, with a simple and rapid operation on the software parameters. Possibility of complete customization of the rules, choosing to give priority considering: Lengths-Recovers for finger-joint- Quantity-Value-Quality. It is also possible to establish different rules for detecting defects on each of the four sides of the board, (differentiating them also on the width on each side). > PRODUCTION STATISTICS Through an easy and comfortable statistics module, the operator can keep the production monitored, with the possibility of exporting data in Excel format.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Saccon

8,337 km

Through-feed optimizing crosscut saw

Salvador Supercut 300 optimus

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 19” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Fast and full optimization maintaining a notable compactness of the machine Feeding system with Brushless servo driven 18 Nm motor. Power motor blade HP=7,5. Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting. Bh9txy8270

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Kanzach

8,019 km

Sorting belt Sorting conveyor belt

DIMTER

€4,500

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Sorting plant, sorting conveyor belt, sorting behind an optimizing saw. Conveyor belt length: approx. 8,000 mm Smf09tht conveyor belt width: approx. 250 mm working height: without feet Drive: without motor 5 pcs. pneumatic buffers Belt is disassembled, because of transport, cables and hoses have to be made new.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Isola Vicentina

8,297 km

MITER SAW / CUTTING CENTER

Stromab CT 800

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2008, Miter Saw - Cutting Center STROMAB model CT 800 Year 2008 D2djue

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Miechucino

8,056 km

Optymalizerka SALVADOR SUPERPUSH 200

SALVADOR SUPERPUSH 200

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2009, Optimizer SALVADOR SUPERPUSH 200 - machine in stock - Italian production - year of production 2009 - full optimization Bzaxs93u7v - DTR - CE TECHNICAL SPECIFICATIONS: - cutting width max 260 mm - cutting height max 120 mm - 7.5 kW engine power - material length max 4000 mm - 3000 mm receiving table - disc diameter 500 mm - feed speed 60 m / min

Price info Price info Already requested more

Listing

Request images Request images Already requested

Österreich

8,353 km

Optimization cross-cut system with line detection

GreCon Dimter 2004

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2002, consisting of feeding belt 6 m fully automatic cross-cutting with LUT line detection Xmi32pjz 6 ejection stations 12 m long

Price info Price info Already requested more

Listing

San Martino

8,334 km

Cross-cut saw angular cutting pusher

CURSAL TRGSI Ø550 TAGLIO ANGOLARE DA 20° A 160°

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, ANGLED CUTTING FROM 20° TO 160° FOR SINGLE AND PACKS OF TABLES Customizable cross cutting saw according to your requests As for the pushing TRSI cut saw, the TRGSI is also structurally a monobloc (speed of installation, anti-vibration system, to cite few of the benefits) Cutting program for individual boards and packs • Cutting in fixed sizes – Sequence of measures • By a CNC industrial computer you can quickly create and store a variety of cutting plans, while working up to 25 different sizes, each with cylinder heads and independent options. • The working parameters (quantity, start / end gap … etc.) are clear and fast setting: they can be customized and saved for each cutting plane based on the preferences of each user. • The cutting programs can be loaded quickly even through a simple USB key (the files must be in .txt format). • Optimized cutting: OL Version: optimization focused on the lenght -E Version: Full optimization with defect removal. Operating dynamic • The rapid movement of the pusher is made on a steel guide ball screw with double sliding carriage by brushless motors • STRENGTH INCREASED = FLOW MORE ACCURATED • Pusher with pneumatic lift with fully protected slide and widely visible • The accuracy, quality and perfect angle of the cut are guaranteed by the action of one side arm synchronized installed before the blade and pneumatic pressure presses Ol8mz Accessories dedicated on loading / unloading up to the fully automatic line.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Saccon

8,337 km

Through-feed optimizing crosscut saw

Salvador Supercut 500 optimus

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Through-feed optimizing saw controlled by numeric control and personal computer with Brushless cutting system for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 500 is a high-speed optimizer able to meet the highest production capacities with utmost reliability. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed of a computer connected in real time to a last generation numeric control. Software TROPTIM running on Windows. Complete with 5 qualities managing. 19” LED colour screen. Tele-service trough internet. Macro Excel included. FAST Innovative cutting system, it is so fast as to make the blade almost invisible to the human eye. Fast and full optimization maintaining a notable compactness of the machine. Feeding system with Brushless servo driven 18 Nm motor. Cutting system with Brushless servo driven 28 Nm motor. Power motor blade HP=7,5 (5,5 kW) Muxpzo Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Double Hard disk. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Kanzach

(dealership location)

8,019 km

Optimierungs Kappanlage

Paul 11 KE

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2002, Min. inlet length: 500 mm, max. 5.5 m. Cross section: max. 85 X 150 Motor: 5,5 kW Sawing stroke servo rocker Feed by rollers, 5 pieces on top, 5 pieces on bottom CNC control Maxi 4.0 Sqo0jg 1 X sorting each 11,5 m year of manufacture 2002

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

San Giovanni Al Natisone

8,394 km

DOUBLE SIDED CUTTING SAW

COMEC TD1200

Price info Price info Already requested Call

Condition: used, Year of construction: 1995, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - N. 2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 P8fxd8rma - Year 1995

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Miechucino

8,056 km

Optimizer GreCon Dimter OPTICUT 204 R

GreCon Dimter OPTICUT 204

Price info Price info Already requested Call

Condition: good (used), Year of construction: 1998, Optimizer GreCon Dimter OPTICUT 204 R - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum TECHNICAL PARAMETERS: - max. cutting length 4,000 mm - min. element 200 mm - max. cutting height 100 mm - max. cutting width 260 mm - disc diameter 500 mm - engine power 9 kW - feed speed max. 160 m / min - acceleration 2 m / s2 - optimization in terms of length and value - pneumatic pressure of the material - three ejectors - dump tables - Rotary table - total length of 2000 cm Transport dimensions: - length 1300 cm - width 245 cm - height 220 cm Cawxzdtcel - weight 3500 kg

Price info Price info Already requested more

Listing

San Martino

8,334 km

Cross-cut saw with belt traction

CURSAL TRV 1200 Ø500 - Customizable

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Customizable cross cutting saw according to your requests THE IDEAL OPTIMIZING SAW FOR SMALL AND MEDIUM SIZES. – Full optimizing with quality defects selection – Defecting – Fixed measures sequences. • Optimized in an ultra – fast and intelligent way, and you will process the most various orders without any stress for the operators. TRV 1200 permits you to cut single rude/painted boards with continuous cycle in a practical and fuctional way. • Once inserted the cutting lists by the touch-screen (or from the office) and selected the type of optimization you prefer, TRV 1200E operates autonomously: – Inserting (*) – Advancement and positioning – Instant data transmission to the CN and optimization processing – Ejection of the pieces – Quality,lenghts, widths selection (*) U0hrjovq (*) check Cursal accessories • Maximum speed (it’s the fastest of its category, autolimited to 195 m/min with Brushless servomotor) and high accuracy are guaranteed by the synergy of a performance optimizer, an indestructible structurally body machine and an effective board control (matched to an exclusive motorized and precise belt by CNC/axes in pressure pneumatic wheels for a universal use). • TRV 1200 is a synonymous of versatility, used for different processes from recoveries, the cleaning of the defects, or, use the optimizer potential for more specific and complex works, where a high level of software processing is required. Software programmation: • More than 100 cut levels: lenghts x quality • Choice of optimization: Per commercial value – Per waste pieces – Per quantity – Per lenghts – mixed optimization • Optimization simulation • Monitoring of worked pieces • Internal body machine optimization: simplification of the process + space recovery Advantages of a numerical controller: • Industrial CNC computer: it guarantees working operations without stopping the production. (The PC it’s multilanguage and functional) • HD touch screen – Data import by USB • Easy and intuitive software: Rapid learning – Easy to use • Possibility of online tele-assistance

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Saccon

8,337 km

Push-feed optimizing cross-cut saw

Salvador Superpush 150

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Semi-automatic optimising crosscut saw with electronic positioner with push/stop mode COSTCUTTING OPTIMIZING SAW Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Horizontal plane with mobile protection to favour the loading of the work piece. Carriage with custom-made stop function and pusher. Linear unit composed by toothed belt with steel cables inside and sliding guide with linear bearings. Horizontal and continuous piece deposit plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a touch screen panel with integrated NC. Software running on Linux with customized interface. Colour display 15,6”, resistant TOUCH SCREEN for a complete safety in industrial environments. Programs import via USB Possibility of Tele-service through internet. + Macro Excel. FAST Software S4U Lite Brushless positioner motor with digital servo-driver. Quick selection interface Stop/Pusher Bh0gbvf Adjustable cutting speed. RELIABLE AND SAFE Movements with sliding bearing with double anti-dust protection. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Two-handed safety manual control. Machine certified "CE" by the Certifying Agency, not self-certified.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Kanzach

(dealership location)

8,019 km

Optiemierungskappsäge

Paul 11 MKL

Price info Price info Already requested Call

Condition: refurbished (used), Model 11 completely overhauled Bnvagoz Description: CNC cross-cut system Paul MKL or K or KE as desired Manufacturer: Paul Year of manufacture: General overhauled with newest technology Condition: As good as new Technical data: Cutting width 150 mm Cutting height 85 mm Saw blade diameter:450 mm Saw motor 5,5KW Input length as required CNC Maxi 5 control with optimization Sorting belt as desired Machine would be completely overhauled, all bearings new motors new with latest eff Class, new control, new swingarm.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

8

San Giovanni Al Natisone

8,394 km

CUTTING OFF MACHINE

CURSAL TRV600+PV600+HM600-35-96

Price info Price info Already requested Call

Condition: used, Year of construction: 1999, SECOND-HAND CUTTING OFF MACHINE CURSAL MOD. TRV600+PV600+HM600-35-96 CE RULES - Infeed motorized rollers mm. 4000x660 - Outfeed motorized rollers mm. 6500x660 - Control ela7 fnc/200 l=6500+vrf 1500x4200x7 - Tss i=45° 2500x42 - S/N 983802 - Year 1999 - Kw 9.1 - Volt 380/50 9yml92zp20

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Miechucino

8,056 km

Optimizer PAUL 11 MKL

PAUL 11 MKL

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2001, Optimizer PAUL 11 MKL - German production - year of production 2001 - full optimization - cutting cycle time 0.4 s Bx89cumeyc TECHNICAL SPECIFICATIONS: main engine power 5.5 kW cutting width max. 180 mm cutting height max. 90 mm blade diameter 500 mm cutting cycle time 0.4 s max. material length 3500 mm min. material length 300 mm feed speed max. 200 m / min acceleration of 25 m / s2 automatic feeding system seven ejectors 4000 mm long cross chain feeder length of the receiving table 11500 mm stub diameter 2 x 125 mm

Price info Price info Already requested more

Listing

San Martino

8,334 km

Push feed optimizing crosscut saw

CURSAL TRSI Ø600 / Ø700 TAGLIO 90°-Customizable

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Customizable cross cutting saw according to your requests TRSI Ø600 CUTTING 90 ° THE SOLUTION FOR BEECH SAWMILL Sturdy, automatic and optimizing cross-cut saw with pusher feeding and modular monobloc structure, equipped with a Ø 600 blade. The big cutting widht makes this cross-cut saw is suitable for cutting beech boards, normally with constant thickness and variable widths. It uses two types of software for: – PROGRAMMED CUT (sequences of fixed measures) – OPTIMIZED CUT (optimization on the total length or with complete elimination of the defect) Pbfepp8 TRSI Ø700 CUTTING 90 ° IDEAL TO CUT BEAMS AND FOR PACKAGING Sturdy automatic and optimizing cross-cut saw with pusher and modular monoblock structure, equipped with a Ø 700 blade. It’s used for cutting beams, for packets of the packaging industry and for the sawmill lumber, considering its big cutting height. It uses two types of software for: – PROGRAMMED CUT (sequences of fixed measures) – OPTIMIZED CUT (optimization on the total length or with complete elimination of the defect)

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Saccon

8,337 km

Push feed optimizing saw

Salvador Superpush 250 optimus

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Push feed optimizing saw with automatic loading chain system for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Superpush 250 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Group to move up and down all the loading chain system. The chain system is of high level of quality of size 5/8”. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows Complete with 5 qualities managing. 19” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Biar0mux0y Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

San Giovanni Al Natisone

8,394 km

DOUBLE SIDED CUTTING SAW BORING

BERLE TB2000

Price info Price info Already requested Call

Condition: used, SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 - volt. 380/50 - s/n 2401011 - ce rules Chwxkzhr8v

Price info Price info Already requested more

Listing

San Martino

8,334 km

Belt optimizing cross-cut saw

CURSAL TRV 2700 Ø500 - Customizable

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, MAXIMUM SPEED FOR LEADING COMPANIES IN THE WOOD MARKET Boeaphr0f3 Customizable cross cutting saw according to your requests We present you the jewel of high speed made by Cursal, TRV 2700EB, where experience, passion and know how are all included. TRV 2700EB is the perfect solution for the company – THAT MUST optimize big quantities of timber with varied qualities. – THAT MUST definitively eliminate the indirect costs, to get a maximum profit from the precious wood raw material. > Advanced brushless handling systems (blade included) , the maximum quality components in the entire the project . > The high performance verified corresponds with the amortization of investments in a few months. Compatible with the entire line of Cursal’s accessories, this cross cut saw was DESIGNED WITH A TRACTION SYSTEM THAT ALLOWS THE BOARD TO REACH A PROGRESS SPEED TO OVER THAN 400 M / MIN ( Self- limited on working phase ) with levels of precision near the tenth of a mm. Software programmation: • More than 100 cut levels: lengths x quality • Choice of optimization: Per commercial value – Per waste pieces – Per quantity – Per length – mixed optimization • Simulation of optimization • Monitoring of worked pieces • Internal body machine optimization: simplification of the process + space recovery. The combination with automatic loaders and optical scanners is excellent. TRV 2700EB : THE BEST COMPROMISE BETWEEN SPEED AND CUT ACCURACY CURRENTLY EXISTING ON THE OPTIMIZING SAWS MARKET.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Saccon

8,337 km

Push feed angles cutting optimizing saw

Salvador SUPERANGLE 600 optimus

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Push feed angles cutting optimizing saw for the complete optimization of the wood and the elimination of the defects PUSHER ANGULAR OPTIMIZING COST CUTTING SAW Superangle 600 is the ideal cutting centre for angles optimized cutting. Direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, to guarantee the maximum precision and keep. EXTREMELY ROBUST Very robust and reinforced steel structure. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Bh9ugcxj9k Software running on Windows. Complete with 5 qualities managing. 19” LED colour screen. Tele-service trough internet. + Macro Excel. FAST Total optic system. Brushless servo driver motor for the pusher. Brushless servo driver motor for the rotation. Adjustable cutting speed. Two automatic alignment pushers. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric Box separated from machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

San Giovanni Al Natisone

8,394 km

BORING AND END CUTTING MACHINE

COMEC FIMOV 2500 2UT+2UF+CA2

Price info Price info Already requested Call

Condition: used, Year of construction: 2002, SECOND-HAND BORING AND END CUTTING MACHINE COMEC MOD. FIMOV 2500 2UT+2UF+CA2 Q2ygl - n. 2 tilting cutting units - n. 2 vertical boring units - maxi working length 250 cm - with automatic loader - perimetral safety net - s/n 021132 - CE (year 2002)

Price info Price info Already requested more

Listing

San Martino

8,334 km

Sawmill optimizing cross-cut saw

CURSAL TRV 2000 Ø700 - Customizable

Price info Price info Already requested Call

Condition: new, Year of construction: 2020, machine/vehicle number: TRV 2000 Ø700, HIGH SPEED OPTIMIZATION IN A SAWMILL? WITH TRV 2000 NOW YOU CAN Customizable cross cutting saw according to your requests TRV 2000, it’s a trimmed/no trimmed boards optimizer, that includes – high precision – big cutting section – working speed. Available in optimizing version (it uses the Cursal’s tested software used by the other set of optimizing saws) and it is the ideal ally to speed up the work cycle in sawmills. Boeavp0qkr It optimizes the external side of trunks from the defects – that with traditional machines should not be recovered – in line with the mobile multi-blade for the completion of the cycle. It advances with a speed of 150 ml/min (auto-limited) with Brushless engine, which allows it to drain the whole product, in line with the fastest log saws, preventing accumulation and interruptions in the sawmill. The accuracy it’s so high that it’s not even required the trimming after the multi blade. The validity of the software, it can be seen in the usage for the optimization of medium noble wood sections. Machine body Proven drive system belt without priming parts. Pneumatic pressure wheels specific for unhedged boards. The in-line optimization, in the engine block of the cross cut saw, allows to process curved and twisted boards. Taste the performance of this line watching the video on the right. ☑☑☑☐☐ Semi-machined pieces for wood furniture ☑☑☑☑☐ Packaging field ☑☑☑☑☑ Boards recovery on the sides of the log ☑☑☑☐☐ Fixtures, construction and flooring ☑☑☑☐☐ Laminated panels, boards, structures

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Saccon

8,337 km

Push-feed optimizing cross-cut saw

Salvador Superpush 200 optimus

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Superpush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. Horizontal deposit/marking plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. 0m2j09v2 Software running on Windows. Complete with 5 qualities managing. 19” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Price info Price info Already requested more

Listing

San Martino

8,334 km

Optimizing push feed cross-cut saw

CURSAL TRSI Ø500 TAGLIO 90° - customizable

Price info Price info Already requested Call

Condition: new, Year of construction: 2022, MONOBLOCK INCORPORATED PUSH-SYSTEM: THE MOST SOLD IN EUROPE AND WORLWIDE Customizable cross cutting saw according to your requests AUTOMATIC, CHEAP, SIMPLE AND INTUITIVE TECHNOLOGY (skilled staff is not needed). Depending on your need, TRSI can be provided for programmed cutting or optimization, and can be used in many SECTORS such as: > PACKAGING: Cutting to size for single plank or in packages, also perfect for cutting squares. > DOORS/WINDOWS: Optimizing and selecting qualities and defects. > FURNITURE: The precision allows it to cut semi-finished with finished cutting. Software programming: – PROGRAMMED CUT: fixed measures sequence – OPTIMIZED CUTTING: OL Version: optimization focused on the lenght -E Version: Full optimization with defect removal. Different optimization priorities:• Price priority • Waste priority • Quantity priority • Length priority • Mixed. – SOFTWARE FOR INTEGRATED MANAGEMENT WITH CUSTOMERS’ SYSTEMS WITHOUT ADDITIONAL INTERFACES – Possibility of online remote assistance. – TOUCH SCREEN HD – DATA IMPORT ALSO WITH USB. – Industrial Computer CNC: guarantee of correct functioning without production stops. Push-system movement: • The rapid movement of the push-system takes place on re-circulating ball steel guide with sliding double carriage by means of a brushless motor. • INCREASED STRENGTH = MORE PRECISE SLIDING • Push-system with pneumatic lift and a completely protected stroke and widely visible. U03dks2v Solid cutting unit to handle packages and mouldings with maximum speed and precision: • Strong aligner with incorporated and silenced blower. • Pneumatic clamp moved on linear recirculating ball carriages and guides. • Multiple dampened rubbered wheels and wet-type clutch to avoid skidding. Dedicated accessories: •Stop wasting time with our custom-made loader. • Match it with automatic printers to classify your semi-finished pieces. • Organize the discharge with specific ejectors for every kind of work. You can with CURSAL. Visit our section ACCESSORIES + LOADERS / UNLOADERS ☑☑☑☑☑ Packaging ☑☑☑☑☑ Semi-machined pieces with finished cutting ☑☑☑☑☑ Fixtures, mouldings and construction ☑☑☑☑☑ Structures and external decorations ☑☑☑☐☐ Laminated panels, blockboards, structures

Price info Price info Already requested more

Save search query