Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Lrsdpfx Ahehwi U Tewjh Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Lrodox A E Tfspfx Ahweh Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of drilling spindles: 14 Total number of tool changer positions: 6 Ledpfxsx A Tinj Ahwjrh

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Lrjdpfxox A Tdls Ahweh Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13 Lodpfxjum H Eko Ahwjrh

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Lredpfjwuz Ekjx Ahwjh Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Lredpfexmgybjx Ahwjh Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Ledpfoxn Nfvox Ahwsrh Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Two machines in one, made by the best Swiss CNC manufacturer. 1. Log milling 2.Timber Framing. This machine produced machined log structures for 6 years, (dormant since), of high precision and quality, for very discerning buyers. For progressive builders who want to automate milled log structures up to 8" x 12" material, or use strictly for timber framing. Best suited for USA or Canada customer, for easy truck transport. Delivery, set-up, calibration, operational training arranged at cost. Ljdpfx Ahowvwl Aeworh Self-contained Compact design, only 10 feet deep, 8 feet wide. All processes are performed inside the enclosure. Cut-offs fall into and are removed from a central pit. Mill shavings are extracted by air suction, leaving work area remarkably clean. So quiet, you can have a conversation beside the working machine.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 82138, functionality: fully functional, operating hours: 3,500 h, compressed air connection: 7 bar, feed length X-axis: 3,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 60 mm, Equipment: USB port, Origin: Italy (CE) Condition: Operational / in working order Weight: 3,000 kg Configuration and heads Each head includes: 29 vertical drilling spindles Electrospindle (A) with independent pneumatic release Saw/blade unit (B) for cutting Horizontal drilling (upper head): X-axis: 8 spindles (workpiece head and tail) Y-axis: 2 spindles (side/outside) Total spindles (machine): Vertical: 29 + 29 = 58 Horizontal X: 8 + 8 = 16 Horizontal Y: 2 + 2 = 4 Power / speed Motor power per head: 2 × 1.7 kW Rotation speed: 4,000 rpm Voltage: 380 V (±10%) Lrodpfjymtfrox Ahwoh Power / current (according to data): 3.5 / 3.5 / 3 kW — 8.4 / 8.4 / 8 A BIESSE SKIPPER 100 NC (2014) operational, CNC machining center for panels (drilling + cutting). Working range: 300×80×9 mm to 3000×1000×60 mm. Software installed, manuals included.

Condition: used, Year of construction: 2022, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 Lredpjx Tt Unefx Ahweh - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 1998, CNC Wood Machining Centre manufactured in 1998. This HUNDEGGER K1 features a maximum workpiece length of 13,000 mm, a workpiece width of 450 mm, and a thickness of 300 mm. It includes various milling and drilling units, along with a ReaJet printer for material marking. If you are looking to get high-quality wood machining capabilities, consider the HUNDEGGER K1 machine we have for sale. Contact us for further details. Lrjdpfxeymz Uhe Ahwoh • Max. workpiece width: 450 mm • Max. workpiece thickness (height): 300 mm • Max. workpiece length: 13,000 mm (13 m) Additional equipment • Cylindrical milling cutter 350 mm x 80 mm (new type) • End mill 160 mm x 40 mm – 2 pieces • Circular saw blade – 2 pieces • Dovetail cutter mounted on the cylindrical milling cutter • End mill 100 mm x 30 mm mounted on the horizontal unit • Chain slotting unit • Drilling units: 2 vertical, 1 horizontal • ReaJet printer for printing markings on the material • Cylindrical cutter Ø 265 mm for corner joints, mounted on the main unit • Vertical ink marker at the machine exit

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, number of axes: 3, spindle motor power: 5,600 W, spindle speed (max.): 18,000 rpm, This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. • Machine frame: Heavy-duty mono-block structure in electro-welded steel • Spindles: • Vertical electro-spindles: 3 • Drilling spindle • Power: 1.7 kW • Speed: 4350 rpm • Point-to-point drilling head: • 5 vertical drilling spindles (32 mm spacing) • 3 double-exit horizontal spindles along Y-axis (32 mm) • 3 double-exit horizontal spindles along X-axis (32 mm) • Milling/mortising spindle • Power: 7.0 kW • Speed range: 12,000–18,000 rpm • Cutting/milling/drilling spindle • Power: 7.0 kW • Speed range: 8,000–18,000 rpm • Multi-function aggregate included • Horizontal electro-spindle: • Type: Milling/mortising spindle • Power: 5.6 kW • Speed: 12,000–18,000 rpm • Tool holder: ER32 collet • Working area: • Nominal strokes: X 3350 mm, Y 200 mm, Z 180 mm • Two working fields: 2 × 1500 mm • Axes positioning speed: up to 70 m/min • Interpolation: Linear and circular on X/Y/Z (3 axes CN-controlled) • Workpiece support tables: • 4 + 4 tables on adjustable slides • Each table with 4 + 4 vertical pneumatic clamping cylinders • Frontal and lateral reference stops • Control system: Lredpfsx D Hngex Ahweh • CAD-CAM control unit • Stand-alone electrical cabinet • Industrial PC with 17" touchscreen • Connectivity: Ethernet, USB, RS232 • Software: Supports NC CAM Suite TPAED132 • Safety and enclosure: • Full perimeter safety cabin • Automatic synchronized front safety door • Polycarbonate panels and safety interlocks • Power and standards: • Supply voltage: 400 V / 50 Hz • CE safety compliance

Condition: ready for operation (used), Year of construction: 2010, number of axes: 5, This 5-axis BIESSE ROVER C9.5 was manufactured in 2010. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle (11 kW HSK F63). It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Contact us for more information. Lrjdpfex Tka Uex Ahwsh • Working Area: X=4600 mm, Y=1935 mm, Z=275 mm • Travel Speed: X-axis: 100 m/min, Y-axis: 100 m/min, Z-axis: 30 m/min • Vertical Spindles: 25 • Horizontal Spindles: 6 • Tool Changer: Revolver type with 8 positions, Chain changer • 5-axis Electric Spindle: 11 kW HSK F63 • Installed Power: 35.7 kW

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, This 4-axis Weeke Optimat BP 145 was manufactured in 2000. A robust CNC processing center, it offers advanced capabilities for precise and efficient machining. Ideal for those looking to enhance their production with a reliable used machine. Contact us for more information. Lodpex D D T Hofx Ahworh

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Lrjdpox D H Hcofx Ahwoh Additional equipment • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: like new (used), Year of construction: 2021, Used CNC machining center Manufacturer: Homag Model: Drillteq V-200 (Optimat BHX 055) Year of manufacture: 2021 X-axis working range: 200 – 3050 mm Y-axis working range: 70 – 850 mm Z-axis working range: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 13 pcs. Horizontal drilling spindles in X: 4 pcs. Lredpfx Aeymzkvehwsh Horizontal drilling spindles in Y: 2 pcs. Grooving saw in X direction Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet Max. workpiece length: 3050 mm Workpiece width: 70 – 850 mm Workpiece thickness: 8 – 56 mm; max. weight: 35 kg POWERCONTROL PC86 power touch control unit with Full HD multi-touch 24″ display, operating system Windows 10 Network connection, Tapio-ready prepared WoodWop 7.0 including MDE and production list software BASIC barcode reading system Delivery exclusively includes all tools and HSK holders shown!

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system Lrjdpfx Ahjx D D Hmjwoh

Condition: excellent (used), Year of construction: 2013, Used 5-axis CNC machining center Manufacturer: Homag Model: PROFI BMG 511/40/15/F/K Year of manufacture: 2013 5-axis spindle 15 kW, Drive5C+ MPU drilling head with 30 spindles, 360° Vertical drilling spindles: 20 Horizontal drilling spindles: 10 Additional routing spindle: 6 kW Speed Pack 18-position disc tool changer D=130 below PickUP station for saw blade 350 mm Tool transfer station Workpiece length: All units: Single 4,000 mm, pendulum 2,250 mm, min. 500 mm Tool diameter 25 mm: Single 4,175 mm, pendulum 2,250 mm, min. 500 mm Workpiece width: Rear stop: 1,900 mm Front stop, all units: 1,450 mm; with tool diameter 25 mm: 1,675 mm – Workpiece thickness: – Max. 300 mm including clamping devices – Up to 60 mm with standard clamps Console table with 10 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups 14* for laminate overhang; 10 extraction rails, connection for Power-Clamp, vacuum connection for templates SAFETY AND PROTECTIVE DEVICES: CE Compliant; SAFETY FENCING ON THE RIGHT WITH DOOR Ljdpfx Aheym Am Seworh Equipment: DRILLING HEAD 30 SPINDLES: V20 / H10/ S360° “MPU” 10 HORIZONTAL SPINDLES GROOVING AND SEPARATING SAW ADDITIONAL ROUTING SPINDLE 6 KW FOR MPU DRILLING HEAD DRILLING/MILLING UNIT 4-SPINDLE FOR TOOL CHANGER MACHINING SPINDLE 15 KW DRIVE5C+ AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE FOR TOOL CHANGER SOFTWARE FOR POSITION MEASUREMENT & CNC AXIS ROTATION TOOL TRANSFER STATION 18-POSITION DISC TOOL CHANGER D=130 BELOW PICKUP STATION FOR 350 MM SAW BLADE FOR DRIVE5(C)+ COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 M³/H Control: POWERCONTROL PC85 WITH POWERTOUCH CONTROL SYSTEM; IPC POWERPACK, OPERATOR CONSOLE FOR PROGRAM START; CAMERA SYSTEM WITH TABLET PC WOODWOP CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the depicted tools and HSK holders!

Condition: used, Year of construction: 2011, max. workpiece length 6000 mm profile spindle 2 Stück main drive 18,5 kW Very well-maintained Homag Profi BMB 922/35/13/B CNC machining center with automatic loading and unloading For machining timber for windows, frame doors, or similar workpieces made of wood or wood-based materials. Detailed description in the accompanying PDF file! HIGHLIGHTS: ----- - Workpiece length up to 6000 mm (with regripping); Workpiece width up to 300 mm for machining individual parts, door leaves up to 1,300 mm on additional crossbeams, workpiece thickness up to 150 mm - Automatic loading and unloading of individual parts, buffer with 2 m depth - Automatic positioning of collets, automatic reclamping Interior/exterior profiling - 2 x 4-axis high-performance spindles with HSK 63 F taper with C-axis - C-axis extension for Flex5+ unit - Fixed drilling head with 13 spindles V9/H4: with 9 individually selectable vertical drilling spindles and 2 horizontal drilling spindles with dual output, 1 in the X direction and 1 in the Y direction - 18-position disc tool changer - 72-position chain tool changer - Additional console table for machining special forms and arches including various vacuum clamps and PowerClamp clamping system for the additional console table. With Lasersystem "Mr. Beam" - Vacuum pump - Chip conveyor belt - Including interchangeable units (saw unit, lock case unit, dowel drilling unit 3 + 1, drilling and milling unit 4 spindles, FLEX 5 unit) - OPTIONAL window tools: • Wooden windows IV 67/77/89 – Year 2011 Lodpfxsymf Eqs Ahwjrh • Front door IV 67/77/89 – Year 2011 • Lift-and-slide windows IV 67/77/89 – Year 2011 • Wood-aluminum windows 67/77 – Year 2018 • Wood-aluminum front door 67/77 – Year 2018 Machine in operation until approximately October 2026 and available for viewing! Detailed technical description, window cross-sections, and prices available upon request! aktuelles Video siehe nebenstehend/current video of the machine attached: Sequenzen Video: Minute 0:00 - 2:08: komplette Maschinenansicht_compplete machine view Minute 2:08 - 12:21: Fensterfertitung gerade Teile_window production straigth elements Minute 12:21 - 14:45: Sonderfensterproduktion Zusatztisch_special window production on additonal table (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Ljdpfxew Dccce Ahworh

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Ljdew Dcb Sopfx Ahworh

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available - Ljdpfx Aow Sguwehworh

Condition: used, Year of construction: 2020, total height: 2,450 mm, total length: 6,100 mm, total width: 2,600 mm, Empty weight: 4.160 kg Price: On request - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 3005 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes Lodpsyla Iqsfx Ahwsrh - Tool changer positions [pcs.]: 18 - System/software: SCM Maestro - Safety feature: Bumper guard - Vacuum pump present: Yes - Tools included: Yes - Table length [mm]: 3756 - Table width [mm]: 1892 - Working range X [mm]: 3700 - Working range Y [mm]: 1870 - Transport dimensions: 6100mm x 2600mm x 2450mm (l x w x h) - Transport weight [kg]: 4160kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery Lodpfx Aeu H Uqcehwerh - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 - Access guarding of discharge area