Condition: reconditioned (used), Total length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm, max. tensioning force per saw blade 6.5 tonnes Bmav7Zlfcmt

Year of construction: 1992, Condition: good (used), Machining for cut-off band saw in concentricity Nu9Vr

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, Complete debarking system with sorting consisting of: Roundwood feed with cross conveyor, equalizing cross conveyor and distributor. Block pull for debarking. Debarking machine Cambio 66 CA Hydraulic extraction control unit with centering rollers. Block pull with measurement. Bnxhx9Zato Sorting block pull with 2 discharge boxes left right and overflow box. Complete disposal with cart conveyor. Electrical control cabinets. Little work. Can still be demonstrated

Condition: excellent (used), Catalog number 7426 TECHNICAL DATA - max. diameter of processed log 320mm - min. length of processed log 2000mm - number of spindles 2pcs - circular saw diameter 500mm - smooth regulation of feed speed on the inverter - lower spindle drive motor power 75kW - upper spindle drive motor power 75kW - feed drive motor power 2×2.2kW - upper, feed, pressure shaft motor power 1.1kW - side, feed, pull shaft motor power 2×2.2kW from above: - 2 pull, toothed shafts - shaft with saws - from the side 2 pull, pull, toothed shafts - 2 pull, slip, smooth shafts from below: - caterpillar - shaft with saws Dpmcrr - caterpillar - total dimensions length/width/height 5900x2500x1900mm + control 1050x1300x2000mm - weight 3800kg Net price: PLN 159900 Net price: EUR 37190 depending on the price EUR 4.3 (Prices may change with higher fluctuations) Possibility to buy a feeder, which is listed on our other auction.

Condition: used, No. 3199 Dq9Xqr Vacuum impregnation machine SCHARF Used Length of impregnation vessel 12000 mm Diameter 1600 mm Wall thickness bottom 10 mm / wall thickness shell 8 mm Gross capacity 24.4 m3 Operating temperature 50 °C Operating overpressure -1/12 bar Vacuum pump 5.5 kW, 1450 rpm, permissible vacuum 150 mbar absolute Siemens Simatic C7 control system Including storage tank length approx. 9000 mm, diameter approx. 2000 mm Including mixing tank approx. 1000 liters It is possible to take the existing Korasit impregnating agent with you Including loading trolley Transport dimensions: Impregnation tank approx. 12500 x 2500 x 2200 mm LWH, weight 12000 kg Storage tank approx. 10000 x 2000 x 2300 mm LWH, weight 3000 kg Sale on behalf of the customer, ex location near 91555 Feuchtwangen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2019, operating hours: 3,900 h, horizontal band saw with scraper conveyor along the saw edging circular saws mounted on the machine left/right pre-cutting circular saws round wood feed roller conveyor behind the machine Bnarkfz09W

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, Haas Drum Chipper 90kw Machine is ready for immediately use Four infeed rollers Two Knives one anvil, also spare knives and anvils Spare knives holder Dq9Ixd 600mm wide shaker infeed

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm -motor 30kW Dq8Uuj

Condition: excellent (used), Functionality: fully functional, Stable cross conveyor for round wood and model with 6 chain strands. Conveyor length 4,300 mm. Height: 450 mm. Chain spacing: 1,200 - 750 - 750 - 750 - 1,200 mm. Shaft diameter 90 mm. Chains 100 x 45 x 6 mm. Drive via gear motor 5.5 KW - 21 rpm with duplex chain. Dq9Vu2

Condition: excellent (used), CATALOGUE NUMBER 7162 TECHNICAL DATA - horizontal clearance 600mm - vertical clearance 500mm - max. blade diameter 1000mm Bcyayfnv - a blade with a diameter of 800mm is installed - max. cutting height for a 1000mm blade 370mm - max. cutting height for an 800mm blade 270mm - spindle diameter 65mm - min. length of the workpiece 1500mm - min. cutting width 70mm - max. cutting width 500mm - number of saws 2pcs - length of the chain feeder 3800mm - slip roller on the output - main engine 22kW - feed engine 1.3kW - smooth adjustment of the feed speed + front/back - diameter of the exhaust port 2x150mm - overall dimensions length/width/height 5800x1300x1750mm - weight about 1500kg ADVANTAGES - Polish production - used sawmill, very good condition Net price: PLN 26900 Net price: EUR 6255 depending on the price EUR 4.3 (Prices may change with higher fluctuations)

Condition: good (used), Esterer HDN 600 ZE Manufacturer: Esterer Type: HDN600ZE Herstellungsjahr: 1986 Zum Verkauf steht die gesamte Maschinenlinie, 31 m langes Transportsystem, Esterertor, 2 m breite Sortiertische mit Rollen. Dq9Xa7

Condition: used, Functionality: fully functional, We are pleased to offer this used Wood-Mizer LT 40 mobile sawmill, located in The Netherlands. Designed for efficiency and versatility, this sawmill is ideal for a range of lumber processing tasks, whether on-site or in a stationary setup. With the capacity to handle logs up to 900 mm in diameter and a cutting width of 720 mm, the LT 40 accommodates large and small-scale projects with ease. Powered by a robust 18.5 kW motor, it delivers consistent and reliable performance, ensuring smooth and precise cuts across various wood types. Technical specifications: Max. log diameter: 900 mm Max. width of cut: 720 mm Max. cant width: 630 mm Max. depth of cut: 350 mm Motor power: 18.5 kW Maximum length: 6100 mm Saw bed extension: Up to 8 meters Blade length: 4010 mm Blade width: 32 - 35 - 38 mm Blade thickness: 1 - 1.07 - 1.14 mm Blade wheels diameter: 483 mm Features: -Pre-cutter. 3Lqeuq3Ui -Log loader. -Hydraulic package. -Saw bed extension up to 8 meters. -Mobile base. -4 boxes of 8 saw bands mostly bimetal. ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACH advises verifying specifications or else.

Condition: excellent (used), Flywheel transmission to avoid light flickering in gang saw drives consisting of:1 heavy flywheel 1260 mm Ø x 90 Ø x profile 5 x 25 mm with flywheel mass rim 90 x 165 mm, 1 extra wide flat belt pulley 580 Ø x 350 mm wide, 1 shaft 90 Ø x 1500 mm long with 2 ball bearing pedestal bearings SN520 Individual, heavy flywheels 1260 mm Ø and 1000 mm Ø also available Dla89R Individual heavy flat pulleys 350 mm wide with different diameters also available

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm Dq8Utb -max. passage width 1000mm -multi-blade saw with fixed saw attachment

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Stable vibrating trough: Length 19 m. Inside trough width 660 mm. Double reinforced eccentric drive. Drive motor 5.5 KW. Dq8Wl7 Increasing.

Condition: good (used), 1980s machine overhauled in the 90s. Brvpdgvi70M I believe everything is here, its very large capacity, unusual for a 1300 machine. Manuals, drawings, operating instructions for the computer included etc. 55k motor, spare arms for the top guide, spare motor and hydraulic drive for the table included. New steel beam frame for the base to raise the table to about 1m off the floor and make it easier to fit, this is included Also, frames to raise the main saw 500mm off the floor too, all ready to install new 6m x 1m wide powered outfield table (in 2 pieces) and 3 sets of chains, not included but can sold on top, additional £5k. Far more pics available of every part, bottom wheel, modern auto start delta starter (not the original) etc. etc. It's all there, get in touch.

Condition: used, Year of construction: 1976, consisting of Owig2Wv8W9 1 feed cross transport with 5 chain strands, 8.0 m long with 2 separate drives, 4.0 kW each, for timber lengths from 2.5 to 12.0 m, 1 ascending cross transport with log transfer, 3.0 m long, 5 chain strands, 1 log hoist with 2 chains and flights, 16.0 m length, drive 1.1 to 5.5 kW, feed 10 - 60 m/min, 1 cross-cut station with chain saw, 11.0 kW, with hydraulic clamping arms, 1 taper roller conveyor for transporting the offcuts and built-in ejectors for transfer to the sorting block train, 12.0 m long, 1.0 m wide, feed 10 - 60 m/min, 05, up to 3.0 kW, 1 sorting block conveyor, 68.0 m long, but without boxes, 5.5 kW, feed rate 50 m/min, 1 wide scraper chain conveyor for removing the sawdust and cross-cuts, approx. 4.0 m long and 1.30 m wide. The machine is still electrically connected and can be demonstrated. The analog control system should be renewed, the sorting block train could be retrofitted be retrofitted with ejectors for boxes,

Condition: used, Year of construction: 2006, operating hours: 4,700 h, Functionality: fully functional, The used Woodmizer LT70 Sawmill from 2006, currently available in The Netherlands. Crafted with meticulous attention to detail in line with Woodmizer's renowned standards, this exceptional woodworking machinery is equipped with a 4670 mm saw length and boasts a generous 950 mm cutting diameter, all powered by a formidable 18.5 kW output. Whether you are a seasoned professional or an aspiring wood craftsman, this sawmill presents an opportunity to expand your woodworking capabilities with unparalleled precision and reliability. Technical specifications: Working hours: 4700 H Cutting diameter: 950 mm Cutting width: 730 mm Bzziz8Ejao Log width: 640 mm Cutting depth: 390 mm Saw length: 4670 mm Saw width: 38 - 50 mm Flywheel diameter: 600 mm Power: 18.5 kW Weight: 2177 kg Included with the Machine: -Extra tension clamps. -Log turner. -Log lift. -10 new saw blades and 25 used saw blades. ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Year of construction: 2024, Condition: new, Log table with chain LOGT2 Technical data: Lifting capacity 2000 KG Capacity 4 m³ Max. log length ∞ Min. log length 1600 mm Standard equipment height 1000 mm Adjustable height of the device 950 - 1150 mm Tap9P Trailer coupling Ball coupling 50mm Rolls 2 pcs Dimensions 2665x2097x1320 Weight 210 kg -For availability contact us for more info. -For delivery info contact us directly.

Year of construction: 2006, Condition: excellent (used), Functionality: fully functional, Stable vibrating trough. Bisy2Cfj7Q Length 10.5 m. Trough width at top 760 mm. Trough width at bottom 660 mm. Height of bottom edge of trough approx. 700 mm. Reinforced eccentric drive with 4.0 KW motor. Technically checked.

Condition: used, Year of construction: 2009, Functionality: fully functional, The used Woodmizer LT15 Start sawmill manufactured in 2009, now available at our location in The Netherlands. This powerful sawmill is designed to accommodate a remarkable log diameter of 700 mm, making it an ideal choice for processing a wide variety of materials with precision and ease. With a generous width of cut of 640 mm and a robust power output of 5.5 kW, this machinery is well-equipped to handle even the most challenging cutting tasks efficiently. Technical specifications: Log diameter: 700 mm Width of cut: 640 mm Cant width: 590 mm Depth of cut: 27 mm Power: 5.5 kW electric Sawdust collection port diameter: 101.6 mm Blade length: 4010 mm Blade width: 32 mm Blade wheels diameter: 483 mm Bed extensions: 1.95 m or 2.7 m Power requirements: 400 V / 11 A (5.5 kW) PLEASE NOTE: Cu8Wgxixhy There are 3 units available, the price shown is per unit. ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Year of construction: 2023, Condition: new, Technical data Description ZBL-60HM Power, kW: 11 Sawband, mm: 40x4970 Maximum log diametre, mm: 800 Maximum log lenght, m: 6.5 Track lenght, m: 8 Number of clamp sets: 2 Manual feed: Yes Zbbhwtfk3 Additional modifications are available. For more information contact us directly.

Condition: excellent (used), Linck high performance creel type DS 71 Frame width 710 x 710 mm. Stroke 500 mm. Speed 320 rpm. Hydraulic roller lift with adjustable roller pressure. Hydraulic feed infinitely variable from 0 - 13 m/min Automatic overhang adjustment of the saw frame. Electromagnetic remote control. Uqdn9K0Iyz Jansen hydraulic saw tensioner with saw hook. Motor 55 KW with countershaft. Hydraulically driven splitting wedge. Hydraulic clamping carriage with hydraulic auxiliary carriage. Dismantled and loaded free on truck.

Condition: used, operating hours: 465 h, Functionality: fully functional, The used Woodmizer LT 40 Mobile Sawmill offers a cutting length of up to 6100 mm and can handle log diameters of up to 900 mm. With a motor power of 11 kW, this industrial-grade sawmill is designed for efficient and precise woodworking operations, making it a versatile and reliable asset for woodworking enthusiasts and professionals alike. Technical specifications: Working hours: 465 H Max. log diameter: 900 mm Max. width of cut: 720 mm Max. cant width: 630 mm Max. depth of cut: 350 mm Motor power: 11 kW Maximum length: 6100 mm Blade width: 32 - 35 - 38 mm Blade thickness: 1 - 1.07 - 1.14 mm Blade wheels diameter: 483 mm Weight: 1800 kg Features: -Hydraulic log turning. -Hydraulic log clamping. -Hydraulic log alignment. -Has a digital sawing computer. Included with the Machine: +- 50 saw bands. -Manual log turner. -Various small parts. ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else. Gpa3Sw

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Also suitable for feeding drying kilns etc. Bn7Ttf7T22A