Used welding sets for sale (338)

Condition: used, functionality: limited functionality,

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 976 mm, total width: 686 mm, total length: 1,152 mm, input voltage: 400 V, overall weight: 128 kg, type of cooling: water, welding current at 100% duty cycle: 350 A, input current: 24 A, welding current (min.): 5 A, welding current (max.): 350 A, input frequency: 60 Hz, Equipment: head guard, The EWM Tetrix XQ 350 puls AC/DC W EX 8P is a modern TIG welding machine designed for professional applications. This machine combines high efficiency, advanced welding functions, and energy-saving technology, making it an excellent choice for demanding professional welding tasks. * Energy savings thanks to high efficiency and standby mode. * Next-generation TIG AC/DC inverter welding machine. * Expert 3.0 control system with a 7-inch high-resolution display. * Welding processes and functions: * TIG AC/DC * TIG DC Bwelhcez Iltyjdw Eju * TIG Pulse * activArc® * spotArc® * MMA * MMA Pulse * MMA CEL * MMA CEL Pulse * Compatible with remote control units and functional welding torches. * flexFit housing system allowing a wide range of accessories to be attached. * LED information bar indicating the current operating status. * IP23 protection class. * Automatic temperature-controlled cooling fan, reducing contamination and noise by operating only when required. * Tool-free welding polarity reversal. * Connectivity to the ewm Xnet software via LAN or Wi-Fi. * Earth fault monitoring with PE protection. * PC interface for PC300 XQ software. * High-performance 1500 W water-cooling system, high-performance centrifugal pump, and 8-liter coolant tank ensure excellent torch cooling.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Bwolsz Eu Syohcdw Esu Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 28244704, total height: 800 mm, total length: 720 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 70 kg, type of cooling: water, hose package length: 950 mm, electrical fuse: 63 A, open-circuit voltage: 74 V, welding current at 100% duty cycle: 500 A, space requirement height: 900 mm, space requirement width: 350 mm, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 600 A, Equipment: type plate available, MIG/MAG welding machine from the brand Fronius. The machine is water-cooled, has 600 amps, and features all the necessary settings for various arc types (Pulse/Standard/LSC/PMC). Bwslhcjz Eg Hvjdw Esu The welding system was mounted on a KUKA robot for testing purposes; all accessories required for installation or use on a robot are included in the scope of delivery! In excellent condition, including spare guide tubes and a magnetic box for torch holder.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of cooling: water, hose package length: 5,000 mm, laser power: 1,500 W, Equipment: type plate available, Hello, dear machine enthusiasts, hello, dear welding enthusiasts! Today, we have another great offer from FOMATEC: We are offering an exhibition machine – the LAWELCO Laser 1502 laser welding machine. Our offer includes: - Laser welding machine with 1,500 watts of power, water-cooled - Double-wire feeder - The welding machine can be operated with or without a single or double wire - Two laser welding safety goggles - A set of spare parts - Various welding nozzles Bwolhcdez Ihk Ujw Eeu If you pick it up yourself, you will also receive free instruction and training, or, if we send it to you, online training on the machine from our team. If you wish, you can also purchase a matching laser welding helmet. We look forward to hearing from you! Your FOMATEC team

Condition: good (used), Year of construction: 2023, functionality: fully functional, laser power: 1,200 W, Laser welding machine MaxPhotonics MA1-45, manufactured in 2023, with wire feeder, handheld laser gun with 5-meter cable, ground wire for safety with 5-meter cable, basic assortment of nozzles (for various applications), 1 Protect Starlight safety glasses, nitrogen pressure regulator, with wobble function, deflection 0-4mm, suitable for structural steel, aluminum, and stainless steel. Up to 4mm thickness. Interface for external safety components. The machine is fully functional. Bwjlhcjz D Dwcodw Eju

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, total height: 1,300 mm, total width: 600 mm, total length: 1,100 mm, input voltage: 230 V, overall weight: 150 kg, type of cooling: water, electrical fuse: 32 A, space requirement height: 1,300 mm, space requirement length: 1,500 mm, laser power: 200 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, Laser welding machine with 200 watts of laser power - Programmable spot diameter - Motorized focus adjustment - Includes rotary axis with three-jaw chuck - Machine (year of manufacture 2025) from our showroom with minimal operating hours - Lamp-pumped YAG laser - Spot welding machine for the finest welding tasks - For jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3 mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) Bslhcdoz Hwzmjw Ejwu - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Current, pulse width, repetition rate, and frequency adjustable on the control panel - Includes protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - External cooling - Power connection 230 volts / 32 amps - German menu Machine dimensions approx.: Width: 60 cm, Height: 120 cm, Depth: 110 cm, Weight: approx. 150 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of cooling: water, CoWelder with Universal Robots UR10 – Migatronic Pi 350 AC/DC We are offering for sale a CoWelder robotic welding system with Universal Robots UR10, complete with Migatronic welding equipment. Bwslhcdwez D Uufe Eju The system was purchased in 2021 and has been used in production, but only to a limited extent. It is in good condition and available for immediate sale. Equipment included: CoWelder robotic welding system Universal Robots UR10 collaborative robot Migatronic Pi 350 AC/DC welding power source Cold Wire Feeder (CWF) Water-cooled welding torch The system is suitable for automated and repetitive welding applications and can be used for a wide range of welding tasks. Technical information: Manufacturer: Migatronic / Universal Robots Model: CoWelder / UR10 Robot: Universal Robots UR10 Welding power source: Migatronic Pi 350 AC/DC Cold Wire Feeder: CWF Water-cooled welding torch Year of purchase: 2021 Condition: Used, good condition The welding/work table is not included in the sale. The equipment can be inspected by prior arrangement. Price: EUR 34,900 net + VAT The equipment is sold as a complete set.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ Bjljyxvwiohcdw Ejwu The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2017-2034, type of input current: AC, input voltage: 230 V, type of cooling: air, electrical fuse: 16 A, open-circuit voltage: 95 V, welding current at 100% duty cycle: 120 A, protection type (IP code): IP21, welding current (min.): 2 A, welding current (max.): 165 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Orbitalum Orbimat 165 CA orbital welding package for tube welding. The package includes: - Orbitalum ORBIMAT 165 CA orbital welding power source / control unit - 2 x Orbitalum ORBIWELD 76S closed orbital welding heads - Orbitalum GFX 3.0 pipe cutting / beveling machine with GF10 drive unit - Hoses, cables, collets / inserts, and accessories as shown in the photos Component details: - ORBIMAT 165 CA: year 2017, serial number 2017-2034 - ORBIWELD 76S #1: year 2020, serial number 3764 - ORBIWELD 76S #2: year 2016, serial number 2489 - GFX 3.0 with GF10 drive unit: year 2016 The equipment is used and sold as-is. A power-on inspection is possible. The ORBIMAT power source starts up, and ORBIWELD head rotation / test movement is demonstrated in the video. A full welding test is not currently available. Bwjlhcozq A Ensdw Esu Condition and completeness are as shown in the photos. Loading: We have forklift / pallet handling capabilities on site and can load the equipment onto the buyer’s truck. Removal: Available immediately. The removal timeline can be agreed upon with the buyer. Transportation is at the buyer’s expense.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Bwolozzaxaehcdw Eju Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Condition: like new (used), Year of construction: 2021, operating hours: 3,006 h, functionality: fully functional, machine/vehicle number: 00161215-02.18, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 910 kg, type of cooling: water, electrical fuse: 16 A, laser power: 900 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, travel distance X-axis: 320 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 370 mm, Equipment: head guard, We are selling a laser welding machine in excellent condition. Bslhjzw Eu Sscdw Ejwu

Condition: new, Year of construction: 2023, functionality: fully functional, total height: 550 mm, total width: 300 mm, total length: 680 mm, input voltage: 400 V, ground cable length: 3 mm, overall weight: 36 kg, type of cooling: air, welding current at 100% duty cycle: 280 A, input current: 320 A, welding current (min.): 10 A, welding current (max.): 320 A, input frequency: 60 Hz, Equipment: head guard, The GYS NEOPULSE 320 C is a professional digital three-phase welding power source designed for high-performance MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA welding. Welding current: 10–320 A Power supply: 3 × 400 V AC, 50/60 Hz, ±15% Bwjlhcdjz H Uizow Eeu Maximum input current: 26 A Effective input current: 22 A MIG/MAG duty cycle: 320 A 40%, 300 A 60%, 280 A 100% TIG DC duty cycle: 320 A 40%, 300 A 60%, 280 A 100% MMA duty cycle: 320 A 40%, 300 A 60%, 280 A 100% Open-circuit voltage: 85 V Wire feed speed: 1–22 m/min Protection class: IP23 Insulation class: Class A Cooling: Air-cooled power source; compatible with an optional water-cooling unit for water-cooled torches Processes: MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA Manufacturer: GYS S.A.S., France The NEOPULSE 320 C is equipped with digital synergic control, allowing for precise adjustment of welding parameters and providing stable, high-quality welding performance. It is suitable for welding mild steel, stainless steel, aluminum, and other alloys in professional and industrial applications.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Bwelhozamffjcdw Eju Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: like new (used), Year of construction: 2012, operating hours: 90 h, functionality: fully functional, type of input current: three-phase, total height: 1,100 mm, total width: 500 mm, total length: 1,200 mm, overall weight: 60 kg, Offer little used welding set Orbital welding of pipes on site (with or without oscillation, depending on pipe thickness) with assembly! Pipe diameter from 25–115 mm Pipe thickness from 1–8 mm Inside includes a pipe cutter, welding arm, remote control, equipment with cooling system everything you see in the pictures. Length x width x height 1200 × 500 × 1100 Bslhcev Di S Eodw Eewu

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A Bwelhcsxlr Tdedw Esu can weld 500mm in length voltage: 380v 50 Hz

Condition: used, Year of construction: 2006, functionality: fully functional, High-frequency welding machine ERKA (06-016-101) FIAB HF generator 8 kW, model P-8 GF with accessories Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us. Bwslhcdozud Aisw Eou

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00 Bwjljzyzwnohcdw Eou

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 24 months, type of cooling: air, DGUV certified until: 10/2027, welding current (max.): 300 A, input frequency: 50 Hz, Equipment: type plate available, OTC Daihen welding machine CPTX-I 3000, 300 amps, 4-roller drive, complete with 4m welding torch, ground cable, pressure regulator, and accessories. Bwjlhcdwsz H Uz Rs Esu

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Built in 1994, modernized by the machine manufacturer KUKA in 2012. The system features a facing unit, a flanging die, and a tube conveying unit for unloading the welded components. We can adapt this system to meet customer requirements. A complete retrofit is also possible. Bwelhcjx I Efbjdw Eju The machine is assembled and can be demonstrated. We can also manufacture your friction welding joints for you, up to a clamping force of 300 tons. Feel free to contact us!

Condition: used, Year of construction: 2025, functionality: fully functional, On behalf of our client, we are selling a laser welding machine from JASIC. Jasic handheld laser welding machine, 2000 watts, with wire feed Model LS-20000F Fully functional, demonstration model with invoice Location: 20537 Hamburg Belhcdozv Uvcew Eswu

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Belhcdwsy Sxkfe Ejwu Including Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included Beloy A Sgnohcdw Ejwu - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Condition: excellent (used), Year of construction: 2021, operating hours: 157 h, functionality: fully functional, machine/vehicle number: 20029618, type of input current: DC, input voltage: 230 V, type of cooling: water, laser power: 1,000 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, Used Fanuci LW-PRO-F01 laser welding machine Power: 1000 W Year of manufacture: 2021 Only 157 hours of welding time Used, fully functional, recently serviced, complete with accessories (nozzles, lenses, etc.) Includes wire feeder. Bwolhcdwszi Spgo Esu

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of input current: three-phase, total height: 1,420 mm, total width: 560 mm, total length: 1,100 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 100 kg, warranty duration: 12 months, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, DGUV certified until: 08/2027, welding power (max.): 19 kVA, open-circuit voltage: 61 V, welding current at 60% duty cycle: 470 A, welding current at 100% duty cycle: 420 A, space requirement height: 1,770 mm, space requirement width: 600 mm, space requirement length: 1,250 mm, input current: 30 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 500 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, We are offering this Böhler Welding TERRA NX 500 PME Rockstar welding machine, a showroom model from 2025, for sale. Bjlhozvmi Iscdw Ejwu The package includes a wire feeder, a 1.5m intermediate hose set, a 4m UP/Down welding torch, and a ground cable. If you have any questions or require further information, please feel free to send us a message or call us.