Used Door manufacturing machinery for sale
3
Technical characteristics
Manual descentDoor stand Power and Motors
Ngv9nuij
Motor: 2 CV Overall dimensions
Feel free to use our online configurator to create your individual edge banding machine for doors and frames (door rebate).
Special machine for edge banding and
finishing work on doors and frames.
Entry side on the right, fold points down,
Edge infeed is taken along by the pressure bar so that the reference edge for the always same edge overhang of 2mm is at the top.
-Top pressure bar with two rows of ball-bearing pressure rollers, manually adjustable with counter.
-Adjustable roller conveyor...
3
GOLD IV 68/78/90
Doors Tool
Euro-HW-WPL-stocking
Z2 + V2 pulling cut
Brand new item
SKU: KUW_L160013
description
Equip yourself with your company for the
new energy legislation.
The company GOLD provides a tool
for 3 different wood thicknesses IV 68/78/90.
Use only a Fraesersaetz for all manufacturing,
Doorframe as door panels.
The supplied AC rings
and the prefabricated cut-outs,
promise a short conversion time.
In terms of sustainability, the GOLD tool stands out!
X33l2kfzc
The areas of ...
Boring screwing machine for anuba hinge Masterwood FA CN 2
B8egoxtc7r
1
Stemmaggregat : Fest
Stemmrichtung : vertikal
Stemmvorschub : manuell
B8igkizm
max. Stemmtiefe : 175 mm
Schlitzbreite : 8-16 mm
Schlitzlänge : 30-300 mm
Spannzylinder : pneumatisch
Gewicht ca. : 195 kg
Motorleistung : 2,2 kW
upon request
Oek8f
3
Technical characteristics
Bmu7tep0
Mortise depth 150 mm max
Bar lubrication pump
Frontal stroke 80 mm
Longitudinal stroke 200 mm
Swivel table
Door support
Manual lowering Power and Motors
Overall dimensions
4
Heavy duty chain mortiser suitable for Standard mortising - Lock and face plate mortising and recessing - Key hole boring.With pneumatic feed of horizontal drilling unit.
Specification
Pho87od
Rotating head + - 45 degrees
Tilting table + - 45 degrees
Swing away table for door frames
3hp Chain mortise head
Turret stop adjustment for slot length
Mechanical clamping of workpiece
Vertical routing operations for lock plate receiving 0.7hp at 7500rpm.
Horizontal routing operation for keyhole borin...
6
Through-feed Machine for the AUTOMATIC inserting-mounting of LOCKS in the DOORS panel.
This machine can AUTOMATICALLY receive the already processed door on another separate machine (ex. MASTERWOOD Door Line - our code TZA632) and automatically put in it (inserting-mounting) the lock.
The machine has 4 different stores of 4 different type of locks (ready on board)
The processable DOORS should have the following dimensions:
Lenght (min) mm 1800 - (max) mm 2500
Width (min) mm 600 - (max) mm 1100
...
15
1 piece. HOMAG type POWER FPL614 / 10/08 / CF
Single-sided format and profiling machine
For machining frames and fillings in MDF and solid wood with curves.
Designed for 4-sided machining in 4 passages (2 x long,
2 x across) - doors max 600 x 1200 mm
Bztdp8bi
Require total technical data!
OBS xxxx thermo face pressure aggregate for MDF (heatet iron)
OBS transport roller conveyors (return)
3
Winkeluebergabe Venjakob
Baujahr ca. 1984
Laenge Einlaufseite 3,00 m
Laenge Auslaufseite 3,00 + 1,50 m
Breite gesamt 2,15 m
Breite zwischen den Laengsanschlaegen 1,65 m
Rollendurchm. 80 mm 10 Rollen je Seite 850 mm lang
Rollenbahnverlaengerung 5 Rollen 550 mm lang Auslaufseite schraeg stehende Rollen.
3 Aushubriemen, Abstand 1. Zum 3. Riemen 1,60 m
Die Winkeluebergabe diente zur Übergabe von Tuerfutterstreifen.
Laenge 550 – 2500mm
Breite 60 – ca. 900 mm
Bttwffv
3
Special saw for hardboard cutting
for the Commission have cut doors decks
Number of pieces: 1 "production
Dimensions hardboard:
maximum size: 2,300 x 1.310 mm
minimum size: 1,800 x 400 mm
Thickness: 2-8 mm
Technical description:
Stand construction:
-Machine frame welded steel profile
Roller rail system:
-Machine frame mounted
-with frequency controlled drive
-Feeding speed 30 m / min.
Alignment stops:
-for longitudinal and transverse orientation of workpieces
Cross yoke:
-Snowmobile
-Height a...
3
Technical characteristics
P9t2x
Ideal for staircase balustrades
Mandrel 16 Ø max
Longitudinal stroke 240 mm
Frontal travel 120 mm
Passage width at the fence 140 mm
Vertical press
Table 600 mm x 250 mm Power and Motors
Motor: 1.8 CV Overall dimensions
3
DOOR PRESS
BRAND ORMA
P8mrt
YEAR 2010
15
Automatic CNC Working Center (through feed machine) to perform on the doors the milling operations (for the lock, the key and the handle) as well drilling and screwing of ANUBA hinges.
Machine composed by:
- Perimeter security grid
- N° 2 in feeding motorized belts
- Separate Electric cabinet and programming PC (CNC)
a) "LOCK" side (to process holes for locks - keys - handles):
- N° 2 vertical pressure pads
Mnqdz
- N° 1 Vertical top Electric Spindle (milling system, Kw 3,3 aprox.)
- N° 1 Ve...
2
I sell the door production machine MAKA, year 1990.
Combined oscillating mortiser and drilling machine.
Br8c7mnhvx
Available immediately
Double mitre saw Wegoma with drilling units
Gk3s2ozbq
type: SD 25 E
year of manufacture: 10/94
new control with touchscreen approx. 2 years ago
working width max. 4000 mm
working width min. 230 mm
cutting height max. 260 mm
thickness max. 140 mm
sawblade diameter max. 500 mm
motor power each 2,5 kW
machine is in very good condition
dimension
5500 mm x 1700 mm x H 1900 mm
weight approx 1600 kg
6
Basic machine
Workpiece transport facilities:
-rolling block link chain with ball bearings on running and guiding surfaces
-Pitch drive frequency controlled
Top pressure:
-with powered compound v-belts
Siemens S7 control
-modern control system based on Windows PC
-PLC control
Compact double Hogger lengthwise and cross 6.6 kW/12 kW
-POS. 1:
-1 motor 400 V, 5 kW, 120 Hz, 7.080 1/min.
-POS. 2:
-1 engine 6,6 kW, 100 Hz, 6,000 1.
-1 motor approx. 12 kW, 100 Hz, 6,000 r.p.m
Standard milling unit pne...
2
Technical characteristics
Mortising type: Chisel
Square mortises, chipped, without lubrication
Horizontal front stroke 90 mm
Pwh8di
Pneumatic feed
Tilting head
Pneumatic press
Aluminium table 1200 mm
Ideal machine for furniture and carpentry Power and Motors
Overall dimensions
7
Eladó PANHANS Euro 5 3200 x 3200-as Táblafelosztó . Precíz , pontos vágásokra alkalmas .
Ieddjscfw
Működés közben megtekinthető előre egyeztetett időpontokban
Ára: NET 8,900 € (Kezdőár nem tartalmazza az áfát)
3
Press 120 Ton 2500X1400 6 pistons D85 mm stroke 400mm
Mekirxn9
Upper moving plane
Massive perforated plane
Heating system 24 Kw oil boiler
Continuous mylar carpet
Unloader with idle wheels
Manual brushes on the press carpet
2
Technical characteristics
Chain length 125/150 mm
Vertical stroke 180 mm
Longitudinal stroke of the head 300 mm
Ngnbklpl
Frontal stroke 80 mm
Manual front press
Door support Power and Motors
Overall dimensions
3
For sale is a spare condition SCM K208 edge trimmer. It can also be viewed at a pre-arranged time, during operation! Direction price: NETTO 5.000 € (Starting price does not include VAT)
Ioibkseqa
4
Technical characteristics
vertical chisel mechanically adjustable oscillation manual descent vertical stroke 150 mm longitudinal stroke 260 mm transverse stroke 70 mm maximum machinable height 170 mm Maximum chassis height 740/1030 mm Power and Motors
P29hr
Overall dimensions
3
Technical characteristics
F20rhpzua
machine à mortaiser oscillantedéplacement de la mèche pendant l’usinage à l’horizontaltable réglable hauteur et inclinablepresseur et avance de la table pneumatiquecontact fin de courseidéal chaisier, ébénisterie Power and Motors
Overall dimensions
1
Technical characteristics
Mortising type: Spindle Tilting table
Pneumatic table feed Per side: 4 adjustable upper mortising heads 3 rear horizontal heads including 1 adjustable Number of mortising heads: 14 Table dimensions: 1000 x 200 mm Power and Motors
B3ocae7nem
Overall dimensions
3
Technical characteristics
Mortising type: Chain Door stand
200 mm stroke cast iron table
max depth 150 mm
trim protection
manual presser Power and Motors
Power: 1.5 Kw Overall dimensions
B3obxg0elo
1
Technical characteristics
Mortising type: Chain Tilting tableAutomatic lubrication Power and Motors
Power: 2.2 Kw Overall dimensions
B3obz3uw9x
3
Technical characteristics
Central chisel and side knives
Horizontal pneumatic cylinders
Br8znwdu
Horizontal stroke 90 mm
Tilting head
Pneumatic advance
Alu table 1200 mm Power and Motors
Power: 1.1 Kw Overall dimensions
2
Technical characteristics
Mortising type: Spindle
movement of the bit during pneumatic table feed
height and tilt adjustable table
B3ob0zih20
pneumatic presser clamping parts
ideal carpenter, chaisier, cabinetmaker Power and Motors
Overall dimensions
4
Technical characteristics
Mortising type: Chisel Vertical course: 120 mm Frontal course: 130 mm Table dimensions: 1000 x 3000 mm Number of stops: 8 Power and Motors
Overall dimensions
Dplrlx7
3
Technical characteristics
Mortising type: Chisel
3 controlled axes with milling / drilling head machine for slotting, drilling, milling such as shutters, hinges, locks, etc. workpiece capacity 150 x 110 x 2800 max depth 130 mm vertical stroke of the head 140 mm useful stroke chisel 3300 mm TF drilling / milling unit with depth axis electro-spindle with reverse 4.5 hp at 18000 rpm useful stroke 3000 mm Power and Motors
Overall dimensions
B3ob7pc0qd
3
Technical characteristics
With beam
useful dimensions : mini 300 x 300 , max 3000 x 2000 mm
Nefqqfh2
hydraulic unit 2.2 kW
10T horizontal clamping
4 hooves
Ideal door and joinery framing Power and Motors
Overall dimensions
3
Technical characteristics
Digital programmingFor frames and sliding doorsPart advance conveyor
Digital command control for manual, automatic or programmed use Work capacity: 2000 X 650 mm Power and Motors
Overall dimensions
P29ab
Length: 4600 mm
1
Technical characteristics
Hydraulic cylindersHydraulic unit Number of pushers: 8 Useful width: 3000mm Useful depth: 1000mm Power and Motors
Overall dimensions
B3n9pv98d8
4
Technical characteristics
With beamElectronic positionningAutomatic screw feederAutomatic screwing
Bpxitp3e
MUDATA electronic positioning
Automatic screw tightening of "Totem" type screws Work capacity: 2500 x 1500 mm Power and Motors
Overall dimensions
3
Technical characteristics
Horizontal Beam framer
Qh0rb
3000 x 1850 mm Power and Motors
Voltage: 400 V Power: 1.5 Kw Overall dimensions
Weight: 1000 Kg
7
Technical characteristics
150 bar hydraulic unit
Dyy32y
useful dimensions 2600 mm x 1000 mm
6 horizontal single-acting jacks with flat or edge locking (clamping high parts)
2 vertical hydraulic pressers
high frequency unit for rapid setting of glued assemblies
3 zone hydraulic control
ideal for frames, panels, furniture element frames, stairs, fixtures Power and Motors
Overall dimensions
Length: 3000 mm Weight: 1500 Kg
1
Technical characteristics
Capacity : 3000 x 2000 mm
Total pressure : 9.5 T
Hydraulic power unit 1.5 kW
Mobile vertical beam, rack and pinion guide
Horizontal pressers 1200 mm stroke
Qk0zv
Closed vertical structure
Ideal framer for carpentry Power and Motors
Overall dimensions
