Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet Fgeliep T Twuenvq Rjb dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 2962 Ident:171526, Multi-Sided Wide Planer with Beveling Unit LEDINEK SUPERLES 400 4V+4F MACHINE DATA Machine type: Multi-Sided Wide Planer with Beveling Unit, Right-Hand Version Version: Manufacturer: LEDINEK Year of manufacture: 1997 Model: SUPERLES 400 4V+4F Machine No.: 2962 Condition: Used, Ready for use DESCRIPTION SUPERLES 400 4V+4F Multi-Sided Wide Planer with Beveling Unit Heavy-duty, universally applicable planer with an innovative quick-change tool system. The machine is suitable for demanding machining of KVH, glulam lamellas, heavy beams, and glued laminated timber. The machine has 4 work spindles and 4 beveling units, arranged as follows: 1. Horizontal at the bottom 2. Horizontal at the top 3./4. Vertical left/right (opposite) Folinvswhvzyoq Regb 5./6. Chamfer top left/right (opposite) 7th/8th chamfer bottom left/right (opposite) Tools: Horizontal shaft speed: 3,000 rpm Vertical spindle speed: 4,000 rpm Chamfer spindle speed: 9,000 rpm Tool diameters: Horizontal shafts: 205 mm Vertical heads: 160 – 300 mm Chamfer cutter: Ø 180 / 45° x 10 mm Tools: Two vertical shafts and two planer and thickness shafts are still available. Extraction nozzle diameter: Dressing shaft: 200 mm Thickness shaft: 250 mm Vertical shafts: 2 × 200 mm Bevel cutters: 4 × 80 mm Extraction speed: min. 30 m/sec General: Air pressure: 6 bar Weight: 14,000 kg Installed power: 140 kW with control panel and control cabinet

Condition: good (used), Year of construction: 2006, operating hours: 14,000 h, Functionality: fully functional, machine/vehicle number: AL1/004511, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed length X-axis: 2,800 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 110 mm, nominal power (apparent): 11 kVA, controller manufacturer: ESA, controller model: KVARA 6, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 110 mm, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, table width: 1,250 mm, table height: 900 mm, table length: 2,750 mm, Working dimension X 2,900 mm Working dimension Y 1,240 mm Working dimension Z 180 mm Number of milling spindles 1 Main motor power 6.6 kW Rotation speed max 18,000 rpm Torque support Tool clamping system HSK-F63 Tool changer positions 8 Vertical drilling spindles 12 Horizontal drilling spindles and X 4 Horizontal drilling spindles and Y 2 Groove saw and X-direction Lock recess milling aggregate double-sided Angular head 0-360+0-90 deg. Vector axis Cantilever machine Machine table Pod and rail table Number of consoles 6 Vacuum pump Number of vacuum pumps 1 Capacity vacuum pump 100 m³/h Safety devices Bumper Interface for .dxf data Control PC control Software SCM XILOG Folinowh I Nvsvq Rsgb Conformity marking CE mark

Condition: new, Year of construction: 2025, Functionality: fully functional, working width: 250 mm, planing height: 120 mm, spindle diameter: 35 mm, planing width: 240 mm, working height: 120 mm, total width: 1,600 mm, total height: 140 mm, total length: 5,300 mm, overall weight: 3,500 kg, spindle speed (max.): 8,500 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 8,500 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, motor voltage: 380 V, workpiece height (max.): 130 mm, compressed air connection: 6 bar, jointer table length: 2,300 mm, type of input current: three-phase, workpiece width (max.): 250 mm, tool diameter: 125 mm, table length: 2,500 mm, warranty duration: 12 months, number of spindles: 6, power: 7.5 kW (10.20 HP), chip removal: 10 mm, frequency: 50 Hz, chip removal for surfacing (max.): 10 mm, feed roller diameter: 140 mm, worktable width: 250 mm, blade shaft diameter: 125 mm, Equipment: cabin, motor brake, Superset NT with 6 spindles and profile package and 14 axis control with 999 programs available. Position 1. Dressing spindle Position 2. Right vertical spindle 2nd axis (up - down / on - off) Position 3. Left vertical spindle 3rd axis (width adjustment + up - down + setup) Fgjlinsn Nwkrsvq Reb Position 4. First horizontal spindle 2nd axis (height adjustment + setup) Position 5 second horizontal spindle 3rd axis (height adjustment + on-off + setup Position 5 top to horizontal spindle: automatic glass bead separation Position 6 plaster spindle bottom with 2nd axis (on-off + up - down) All spindles with 8500 rpm (pos. 2-3-4-5-6) and pos. 1 with 6000 rpm. Control with color screen with 19" touch screen (14 axis control)

Condition: used, Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 0500800070, overall weight: 742 kg, fuel type: electric, The machine presented for inspection was purchased new in 2022. It is in good technical condition on the outside, there are visible scratches from use on the external casings, traces of use, local corrosion centers on the conveyor belt casings. During the inspection, it was not possible to connect to a power source and check the machine in operation. Electric motor 400V Motor power: 9500 W 18.4 A Splitting force: 20 tons Max. cutting length: 500–550 mm Max. wood diameter: 500 mm (minimum 100 mm) Fjlijwhw Izjnvq Regb Splitting wedge speed: 5 cm/s Splitting wedge return speed: 4 cm/s Saw guide length: 55 cm Chain saw / splitter drive: Hydraulic Chain: C3621 000 0077 / 0.375 / 1.5 mm Conveyor belt length: 3.2 m Max. loading height: 2.0 m Conveyor speed: 0.8 m/s Conveyor belt drive: Hydraulic Weight: 742 kg (632 kg + 110 kg conveyor) Dimensions (W / L / H): 2200 / 1050 / 1250 mm Dimensions - belt feeder (W / L / H): 1850 / 450 / 570 mm

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 11218-20, The press is fully functional, in constant use. Fgolinvqowh R D As Rsb The press is fully functional and in constant use. The press is fully functional, in constant use.

Year of construction: 2008, Condition: good (used), Scolari sawdust dryer for sale with automatic control - currently in operation. The dryer uses fresh air mixed with flue gas, the maximum drying temperature is 130-140 °C. Its heat requirement is 2,000,000 Kcal/h, capacity is 2 tons/h (dry sawdust). It is heated by an automatically controlled wood chip boiler. Extras: • Automatic moisture meters on the inlet and outlet sides • Frequency converter-controlled draft in the drying chamber Folinsv Eu R Asvq Rjgb The equipment can be viewed in operation after prior arrangement. A detailed description is available on request.

Condition: like new (used), Year of construction: 2012, Dear customers, we are currently offering you a used band saw from the HEMA brand. Here are the technical data of the machine: Table: 900 x 900mm Cutting width: 780 mm Super cutting height: 390 mm Roll diameter: 800 mm Saw blade length: 5,600 mm Power: 4 kW Fjlowc Tuaoinvq Rogb Speed: 1,650 rpm Dimensions: 1,500 x 950 x 2,700 mm Weight: approx. 720 kg Special features: - Comes from a paper factory and only sawed cardboard there! Price plus VAT, which is shown separately on the invoice. Shipping possible for an additional charge! If you have any questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2006, 1. tool holder - lower Nobq Up Nusuzaa Sj Docp Brake motor: 5.5 kW Spindle diameter: 40 mm Speed: 6000 rpm Tool circumference: 93 - 160 mm Axial adjustment range: 5 mm Folding device MarathonCoatin for table insert in front of 1. lower tool holder 2. tool holder - PowerLock - right Brake motor: 11.0 kW Common motor with left tool holder Speed with high-performance ball bearing Tool circle 40 mm below table level: 93 - 200 mm Tool circle 55 mm below table level: 93 - 180 mm Tool circle for simple milling heads max. 163 mm Max. tool diameter behind the limiting plane: 180 mm Max. forming depth: 35 mm Axial adjustment path: 55 mm CNC-controlled axial and radial spindle 3. tool holder - PowerLock - left Brake motor: common motor with 2nd spindle Speed with high-performance ball bearing Tool circle 40 mm below table level: 93 - 200 mm Tool circle 55 mm below table level: 93 - 180 mm Tool circle for straight milling heads max. 163 mm Max. forming depth: 35 mm Axial adjustment path: 55 mm CNC-controlled axial and radial spindle 4th tool holder - PowerLock - upper Brake motor: 7.5 kW Speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. tool circle for straight cutting heads: 180 mm Max. forming depth: 35 mm Axial adjustment range: 40 mm Split pressure foot in front of the upper tool holder, adjustable to the tool circle and tilted away from the tool, spring-loaded. CNC radial controlled spindle 5th tool holder - PowerLock - upper Felinjwavgtsvq Regb Brake motor: 7.5 kW Speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. tool circle for straight cutting heads: 180 mm Max. forming depth: 35 mm Axial adjustment range: 40 mm Split pressure foot in front of the upper tool holder, adjustable to the tool circle and tilted away from the tool, spring-loaded. CNC controlled spindle axially and radially 6. Tool holder - PowerLock - lower Motor with brake: 7.5 kW Rotation speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. forming depth: 15 mm Axial adjustment range: 35 mm CNC controlled radial spindle Feed system Feed controlled frequency, stepless with brake: 4 kW, 5 - 30 m min The machine is connected, it only worked in pine wood.

Condition: good (used), Sliding table, sliding carriage on a Martin T21 spindle moulder for sale. Worked perfectly until dismantled. Only removed due to lack of space. Ideal for making mortise and tenon joints and lap joints. Foliowgh Trsnvq Rogb Weight according to data sheet: approx. 170 kg

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Fgsljiiv Dcsinvq Reb Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: used, Year of construction: 2021, Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feed min: 10 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: Premelting unit Magazine for single strips: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Finishing aggregate: Hot air Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 6.221 mm Control: SCM eye-M Declaration of CE-conformity: Yes Conformity marking: CE mark Fgjlinvswc Tn Hjq Rjb Weight: 2.435 kg

Condition: like new (used), Year of construction: 2010, Functionality: fully functional, Fiedler boiler for dryer - heat transfer medium flue gas We offer for sale our "Fiedler SZDO-BS" boiler. Power: 1000 kW Maximum temperature: 400 °C Maximum flow rate: 2 m³/sec Noise level: 78 dB Total weight: 7500 kg Power consumption: 2,7 kW Electrical requirements: 3x400V/230, 50Hz Production number: 356 Year of manufacture: 2010 The boiler is in excellent condition as shown in the pictures. The boiler body is insulated with samott bricks. The boiler has been sold due to the closure of the manufacturing plant. Not in use but cold tests have been carried out. Fgslinvqetwclvo Rob No possibility to test it in operation. The boiler is in automatic operation. The fuel is fed into the firebox by a pulley. The firebox is of the shrouded type, with inclined grate (but not moving), using primary and secondary air. The flue gas is mixed with fresh air in the 'afterburner' section of the boiler. The fresh air enters on the left side of the boiler. Its flow rate - and thus the drying air temperature - is controlled by an electrically operated butterfly valve.

Condition: new, Multi-combination machine with aluminum sliding table for sawing, milling, planing/thicknessing and optional slot drilling torsion-resistant cast steel construction machine table made of cast iron, hardened and ground light-weight anodized aluminum sliding table, 10 years SCM warranty on wear of the guideways large trimming frame with telescopic aluminum fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit working length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45° working width 300 mm planing table length 1260 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. table dimension 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed speed 7 m/min milling spindle diameter 30 mm useful length of milling spindle 100 mm max. tool diameter 180 mm retractable spindle speed 3500/600/800 rpm motor power 3 x 4 kW, 400 V, 50 Hz weight 430 kg suction nozzle diameter 4 x 120 mm Suction nozzle Ø saw blade guard 60 mm sliding carriage with ball contact system equipped with millionfold proven ball contact system permanently smooth running due to hardened and ground guideways not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The suction nozzles of the dresser and thicknesser point in the same direction. The suction hose can therefore be fed to the machine from the same side for both types of planer. Steel infeed rollers with helical teeth for a constant and even and uniform wood infeed solid backstops prevent the backstroke of workpieces Folieiiyppenvq Rogb 3-knife shaft ensures an optimal planing pattern

Condition: used, Year of construction: 2017, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 16 Disc tool changer: Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table Electronic supervision of the end-position of the stops: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Registration mark recognition: Yes Safety device: Light barrier Ionisiereinrichtung: Yes Interface for .dxf data: Yes Remote control: Yes Automatic lubrication: Yes Tool charge measurement: Yes Enclosed drag chain: Yes Control: BIESSE BH 660 Feliewc Tmcenvq Rsgb Software: BIESSE B_SOLID, BIESSE B_NEST, BIESSE BSOLID DATENIMPORT, MICROSOFT WINDOWS 7 Registration mark recognition: Yes Conformity marking: CE mark Total connection: 31,21 kW Weight: 3.600 kg

Condition: used, Functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: Fjlisv Hm T Ssnvq Regb - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min Fslinvqshun Tzs Rsgb incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: used, Year of construction: 2022, Capacity: 300 kg/h Hopper width: 225 mm Main motor power: 22 kW Screen: Yes Fgolinvswc Tl Soq Rsb Starch mixer: Yes

Year of construction: 2024, Condition: new, For sale: drying system - 1T 184 TPR Model, (Mobile Conveyor Belt) We offer a high quality drying system, ideal for drying wood sawdust, produce, recyclable waste, food ingredients. Below we present the design details and features of the drying system: Design data: - Product handled: sawdust - Physical appearance:Loose - ˃ 1 mm - Initial moisture content: 55%, 50%, 40% - Final moisture content: 12% - Wet production: 4,00 t/h, 4,50 t/h, 5,65 t/h - Dry production: 2,05 t/h, 2,55 t/h, 3,85 t/h - Drying air temperature: 80 °C - Thermal energy consumed: 1.800 - 2.350 kWh - Max. evaporated water per hour: 1.800 - 1.955 Kg/h Installed electrical power: - Feeding cooker: 5,5 kW (x2) - Drying belt: 2,2 kW - Unloading equipment: 5,5 kW - Exhaust fans: 22,00 kW (x3) Fgjleua D U Ioinvq Rsb - Cleaning fans: 4 kW (x2) - Total installed power: Approx. 92.70 kW Water-to-air heat exchanger: - Recommended thermal capacity: 2.600 kW - Water temperature: 90 °C on - 70 °C off Dimensions: - External dimensions of dryer frame: Approx. 22 m long, 6 m wide - Drying belt surface: 72 m² - Unloading equipment: 5,500 mm x Ø 300 mm - Feeding trough: Approx. 1.00 m³ - Number of exhaust fans: 3 - Number of water-to-air heat exchangers: 4 Technical description: - Feeding system: Adjustable pulley conveyor with level sensor. - Drying table: Modular design with inspection windows. - Drying belt: Polyester fabric conveyor belt with steel rollers. - Thermal insulation: 50 mm thick rock wool with Magnelis® cladding. - Mixing brush: Painted steel mixing brush. - Base frame: Folded steel plates with reinforcing profiles. - Drying belt cleaning system: High pressure air and water spraying system. - Water spraying system: Closed circuit water spraying system. - Stairs and access: Secure access stairs and walkways. - Unloading equipment:Steel pulley unloader with motor. - Heat exchangers: High efficiency steel finned heat exchangers. - Air exhaust fan: Centrifugal fans with vibration damping connections. - Heat recovery: Hot air return duct. - Machine enclosure: Prefabricated enclosure made of insulated sandwich panels. - Dust filters: dust filters on the air intake grille. - Paint cycle: Phosphating, passivation, polyester powder coating. - Electrical control panel with PLC: SCHNEIDER electrical and PLC components, HMI control panel. - Humidity control system: PT 100 temperature sensors. - Remote service: direct connection via Internet. - Input and output humidity sensors: 4-20 mA adjustment. For further information and quotation please contact us! We look forward to your interest! Price: 530.000 Eur

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. Fjlinjhby Rijvq Rogb It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 Fjlinev Hm Nmovq Rjgb with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Folinjiz A Amjvq Regb Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: new, Work table adjustment in the infeed by means of parallelogram system Display for chip removal via degree scale Simultaneous height adjustment and locking of the work tables complete with anti-tilt device Quick changeover system for changing from dressing to thicknessing operations (CE version) by means of a special support for the opening of the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic assistance. "READY" electronic control includes: - Thicknessing table adjustment - Manual, semi-automatic and automatic mode with 99 storable working programs. - Additional functions: Calculator and hour meter Automatic star delta start for main engine Machine table with height adjustment via 4 steel threaded spindles Rubber-coated feed roller at the outlet Exchangeable feed rollers Link pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro protection switch for correct positioning of the dressing tables and extraction hoods Dressing hood (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data [mm Usable working width [mm] 520 Total table length [mm] 2310 Blade shaft diameter [mm] 120 Fjlinvjd Akyzjq Rsgb Motor power [kW] 9.0 Hz 50, 400 V Planer shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminium planing fence [mm] 1200 x 190 Planing fence inclination from 90° to -45 Min./ma

Condition: excellent (used), Year of construction: 1991, Long dressing tables Work tables made of gray cast iron Sturdy planer fence with hand crank, swivels 0 - 45 degrees Helical toothed feed roller on thickness planer Motor protection switch Thicknessing table height adjustment with handwheel Under-table roller Fgslinveudx Taoq Rsb Working width max. 500 mm Planing height 3 - 225 mm Planer table length 2300 mm Planing shaft DM 120 mm Number of planing knives 4 # Planing shaft speed 4500 rpm Motor power 4.0 kW, 400 V, 50 Hz 2 Feed speed 7 - 14 m/min Dimensions approx. L x W x H = 2300 x 850 x 1050 mm Weight approx. 900 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Fgslinvqjgw Sxze Reb • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)