Used Finishing machines for sale

WEINIG 4 sided moulder Weinig Unimat 30 EL

ready for operation (used)

€75,000

HEMAG coroprofil four-sided planer

Call

Technical characteristics Used Weinig Heavy Moulder 7 PO UNIMAT 30EL Mechanization: Hydraulic introducer, short table. Capacity: Useful width = 20-300mm Useful height = 8-200mm Groove table, 7.5kw drive (from 6m to 36m / min), pneumatic presser, short wood device. Composition: Lower horizontal shaft (15kw) Straight spindle (11kw) Left spinner (15kw) Upper horizontal shaft (30kw) Gjhchhif Lower horizontal shaft (18.5kw) Upper horizontal shaft (18.5kw) Lower horizontal shaft (22kw...

more

Listing

Łabuńki Pierwsze

8596 km

Hemag coroprofil 32

1998

excellent (used)

€18,000

SANDING BELT/BUFFING MACHINE WITH AUTOMA

Call

* working width 320 mm * working height 160 mm * each head started separately, on an independent motor * motors on vertical spindles - 5.5 kW each * motors on horizontal spindles - 7.5 kW each * electronic dimension input * automatic setting of the side head depending on the width of the element * 4 spindles adjustable in two axes * vertical heads adjustable up/down and front/back ( as in milling machine ). Cgqxd70jvx * input gears in front of the first head * pneumatic pressure of pulling rolle...

more

Listing

Нови Сад

8819 km

VOLPATO LBO 60 A STS

2019

as good as new (ex-display)

€15,000

ONO VAT not applicable

Call

SANDING BELT/BUFFING MACHINE WITH AUTOMATIC MOVEMENT OF THE BRUSH UNIT MOD. LBO 60 A STS WORKING TABLE LENGTH 2500 mm WORKING TABLE WIDTH 1000 mm VERTICAL STROKE 660 mm BRUSH MOTOR STROKE 2100 mm MAXIMUM DIAMETER OF THE BRUSH 250 mm MAXIMUM WIDTH OF THE BRUSH 200 mm BELT DIMENSION 120 ÷ 150 x 8200 mm VARIABLE SPEED TRANSLATION OF BRUSH UNIT 1 - 5 m/min VARIABLE SANDING BELT SPEED 3,6 - 18 m/sec VARIABLE BRUSH MOTOR SPEED 300 - 1500 rpm BELT DUST EXTRACTION (DIAMETER) 180 mm BRUSH DUST EXTRACTION...

more

Listing

Naprawa

8496 km

Paoloni 240 9/23

used

€6,100

Call

Technical data: Max planing width: 240 mm Max planing height: 130 mm Spindle diameter: 35 mm 2wtxjmo Number of spindles: 4 Spindle sequence: down 4 kW right 4 kW left 3 kW up 5.5 kW Each spindle on a separate motor Toothed pulling rollers: 2 Extraction port diameter: 125 mm 2 feed speeds Cardan feed Table lubrication pump Pulling roller in the worktop Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 3380mm Width: 1100mm Height: 1500mm

more

Listing

De Goorn

7466 km

Wide belt sander

Boere machines B.V. Sandrite 1300 KC

2009

excellent (used)

Call

Broad belt sander in good condition Sandrite 1300 KC The machine is designed for professional use and is mainly used in the woodworking industry for sanding solid and veneered surfaces. This wide belt sanding machine distinguishes itself in two methods. Sanding with a cylindrical contact surface (mainly for flat sanding) and sanding a flat contact surface (only for fine sanding). Specifications: - Sanding width: 1300 mm - Sanding height: 150 mm - Sanding belt dimensions: 1310 x 1900 mm - Net...

more

Listing

Saint-Nicolas-de-Redon

7315 km

4-SIDED MOULDING MACHINE

SCM

2000

excellent (used)

€43,000

Call

Brand : SCM Type (Model): SUPERSET 23 Composition 6 Serial number : AB/134503 Year : 2000 MACHINING CAPABILITIES: - 4-sided corrugator and moulder - Working width of finished sections : 23 to 240 mm - Working thickness of finished sections : 6 to 130 mm - Maximum section : 130 x 240 mm - Minimum length of individual piece : 435 mm (600 mm when using the universal shaft) - Adjustable infeed: max 10 mm - Shaft rotation speed : 6000 rpm COMPOSITION OF THE CORRODING MACHINE: - Robust welded fr...

more

Listing

Nevers

(dealership location)

7693 km

WEINIG Moulder UNIMAT 1000

ready for operation (used)

€50,000

SCM Compact 23 four-sided planer

Call

Technical characteristics 6 shafts : Lower planer 5,5 kW Right spindle moulder 5,5 kW Left spindle moulder 5,5 kW Right spindle moulder 5,5 kW Upper planer 7,5 kW Lower planer 7,5 kW Feeding speed 5 to 24 m/min Working width : 230 mm Working height: 120 mm Machine control Memory system Cuy8q3lu7g Spindle speed 7000 RPM Heavy machine Power and Motors Voltage: 400 V Pluging: Three-phased Power: 40 Kw Overall dimensions

more

Listing

Łabuńki Pierwsze

8596 km

SCM Compact 23

excellent (used)

€7,500

traverse type spray mchine

Call

Good morning, We offer for sale a professional four-sided planer ( profiling machine ) produced by the Italian company SCM model Compact 23 To begin with, some useful information about the machine: * working width 230 mm * working height 120 mm * horizontal heads run separately, on independent motors of 5.5 kW each. * vertical heads on a single motor with a power of 5.5 kW * total power 17,5 kW * electric adjustment of planing height Hwdrw2cz * 4 spindles fully adjustable in two axes * vertic...

more

Listing

Helme

8141 km

Ceetec TS 9017

2013

excellent (used)

€28,500

Call

Traverse type spray machine (1 traverse). Sprayers: Kremlin A35 Hti Inox (2 or 4). The width of the working zone: 800 mm. Working speed: 3-5 m/min. Max detile height: 100 mm. Electrical parameters: L1-L2-L3-N-PE, 3x400V 50Hz, fuse max 35A. Control panel: Siemens. Conveyor belt: film (PELD). Weight: 1500 kg. Mzxdg8 Machine is disassembled, spray booth and conveyor are separetly for easyer transport. 4 rolls of film and trolley for film rolls are included. Finishing machine has worked 20 hours.

more

Listing

Naprawa

8496 km

Griggio 180 8/23

used

€6,100

FORMAT 4 PLAN 51 Surface planer

Call

440 / 5 000 Wyniki tłumaczenia Syxnmc Tłumaczenie Technical data: Max planing width: 180 mm Max planing height: 130 mm Number of spindles: 4 Spindle sequence: down 4 kW right + left 5.5 kW up 4 kW Toothed pulling shafts: 3 Extraction port diameter: 100/125 mm 2 feed speeds Table lubrication pump Pulling roller in the worktop Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 3570mm Width: 1050mm Height: 1520mm

more

Listing

Węgry

8316 km

FORMAT 4 PLAN 51

2011

excellent (used)

€6,800

Complete line for sawing wood

Call

FORMAT 4 PLAN 51 L - planing width: 510 mm Ct88ajivhx - total length of the table 3000mm - electric height adjustment - planing fence 0=>45* - 4-knife planer shaft 5000 rpm - planing adjustment up to max 8mm - year 2011 - Original painted when ordered in fields

more

Listing

Strawis PWR 412

2017

excellent (used)

Compleete sawig wood line capacity 120 m3/8 h. Configuration: - Two-shaft bridging machine disc with the following equipment: Cuf7unsigd • the maximum log diameter is 400 mm • minimum length of lumber 1500 mm • power on the shaft - upper spindle - 90 kW • shaft power - lower spindle 110 kW • the length of the feeding table is 3000 mm • diameters of dust discs used are Ø 600 mm • feed regulation range 4 ÷ 30 m/min - Multi-disc saw PWR 412 with the following equipment: • 2x75 kW saw shaft drive ma...

more

Listing

Nevers

(dealership location)

7693 km

WEINIG Moulder 6 shafts PFA 14/6

ready for operation (used)

€11,000

CASADEI Syncro four-sided planer

Call

Technical characteristics Feeding 6 to 36 m/min Capacities Gc3mijv Width: 170 mm Height: 120 mm Length of infeed table 2000 mm Composition : Planer 3 kW Right spindle moulder 3 kW Left spindle moulder 5,5 kW Right spindle moulder 7,5 kW Planer 5,5 kW Universal spindle 5,5 kW Power and Motors Pluging: Three-phased Overall dimensions

more

Listing

Łabuńki Pierwsze

8596 km

Casadei Syncro

1994

excellent (used)

€4,900

Call

* working width 190 mm * working height 120 mm * motor on vertical spindles - 5.5 kW ( one for 2 heads ) * motor on horizontal spindles - 7.5 kW ( one for 2 heads ). * total power 14,5 kW * electric adjustment of planing height * manual adjustment of planing width * 4 spindles equipped with aluminum spiral heads for replaceable plates Cxaqvdi8ft * input sprocket in front of the first head * insertion table top with a length of 248 cm and a width of 19.5 cm * pump for manual lubrication of the ta...

more

Listing

$Barberan BRB-2-1400 L\RR$

Sesto Calende

8116 km

Double roller coater

Barberan BRB-2-1400 L\RR

used

Call

Double roller coating machine Machine usable in line or as a single machine Maximum working width mm 1400 Machine length mm 1500 approx Panel thickness (working height): mm 3 - 80 approx Variable feed speed Control panel 1 °) Dosing group (Dosing roller in chromed steel) + Spreading group (Rubber coated roller) 2 °) Dosing group (Dosing roller in chromed steel) + Spreading group (Rubber coated roller) Motorized conveyor belt Built-in electrical panel and controls Cb2mg8y0wm

more

Listing

Naprawa

8496 km

FORMAT 4 EXACT 51 thickness planer

Wadkin GD220

used

Call

Technical data: Max planing width: 230 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right 5.5 kW left 5.5 kW D209h3 up 11 kW down 7.5 kW Feed motor power: 3 kW Toothed roller in the countertop in front of the first head Number of upper steel pulling rollers: 4 Number of upper rubber pulling rollers: 2 Extraction port diameter: 125/150 mm Smooth feed adjustment: 5-30 m/min Cardan feed Table lubrication pump 2 smooth rollers in the tabl...

more

Listing

Węgry

8316 km

FORMAT 4 EXACT 51

2011

excellent (used)

€6,800

Reversible planer TOS SVITAVY F2T-80

Call

FORMAT 4 EXACT 51 - planing width: 504 mm - thickness height: 4 - 254mm Ct87jbm8nj - feed speed: 4 - 16 m/min (stepless) - table length ca 800mm+ roller table ca 1200mm - 4-knife planer shaft - electronic digital display for thickness table adjustment

more

Listing

Juszczyn

8483 km

TOS SVITAVY F2T-80

good (used)

€6,000

Call

Reversible planer TOS SVITAVY F2T-80 Workpiece width 800mm Workpiece thickness 200mm Planing shaft with 4 knives Electric lifting of the worktop Complete machine, working, sold without preparation Foay0w87

more

Listing

Nevers

(dealership location)

7693 km

SCM Moulurière SUPERSET 23

ready for operation (used)

€25,000

tool, tool holder, 4-sided soft planer

Call

Listing

Verlhac-Tescou

7766 km

Leitz Hydrau ( serrage hydraulique )

excellent (used)

€1,000

Fixed price VAT not applicable

Call

Hydraulic clamping sleeve tool for 4-sided moulding brand LIETS WEINIG D ext 160 mm Bore 50 lg 230 Z 8 qt 1 Cqqk3sdu D ext 160 mm Bore 50 lg 170 Z 6 qt 2 speed of rotation max 8000 tr/mn 1000€ the 3

more

Listing

Sesto Calende

8116 km

Sprayer

Giardina 401 Dualtech

2008

used

Call

Electronic control of the machine through PLC model Telemecanique - Premium, with touch screen keyboard a XBT colors with the following functions: * transport speed * reciprocator speed * adjustment of the gun intervention area in relation to the size of the panels * the guns can be ignited individually and can spray independently * statistical functions and work data storage Working width 1300 mm Minimum length of pieces 300 mm Maximum working thickness 45 mm Feed speed adjustable from 2 to 6 m...

more

Listing

Naprawa

8496 km

Four side planer GUILLIET KXU

WEINIG U23 7+3

used

Call

Technical data: Max planing width: 240 mm Max planing height: 150 mm Spindle diameter: 40 mm Number of spindles: 7 + 3 Order of spindles: 1. down 7.5 kW 2.right 7.5 kW 3.left 7.5 kW 4. up to 7.5 kW 5. bottom 7.5 kW 6. up to 7.5 kW 7. bottom 7.5 kW 8. universal 7.5 kW 9. universal 7.5 kW 10. universal 7.5 kW Each spindle on a separate motor Toothed pulling shafts: Djaxacom Extraction port diameter: 140 mm Smooth feed regulation: 6-36 m / min Cardan feed Pump for lubrication of the working table ...

more

Listing

Brusy

8074 km

Four Side Planer

WEINIG UNIMAT 23EL

2002

excellent (used)

€31,500

EXW Fixed price plus VAT

Call

TECHNICAL DATA - minimum workpiece length 220 mm - max width of processed element 230mm - max height of a workpiece 120 mm Grooved table for short workpieces number of spindles 6: 1) horizontal bottom 230mm 7.5kW 2) vertical right 170mm 7.5kW 3) vertical left 170mm 7.5kW 4) vertical right 170mm 7.5kW 5) horizontal top 230mm 7.5kW 6) horizontal bottom 230mm about 7.5kW - rotational speed of spindles 7,000 rpm - all spindles adjustable up/down, right-left - spindles equipped with electric brakes -...

more

Listing

Karsin

8083 km

Guilliet kxu

1989

like new (used)

€3,300

Call

planing width 180 mm spindle diameter 40 mm planing height 120 mm 1 lower head 3.7 kW 2 right head 3 left head 5.5 kW 4 upper head 3.7 kW feed smoothly adjustable 3-21 m / min 1.5 kW feed motor power electric height adjustment Ciujiqd

more

Listing

Nevers

(dealership location)

7693 km

WEINIG moulurière UNIMAT 23E

ready for operation (used)

€34,000

Continuous press with block tipper

Call

Technical characteristics Power and Motors Cuy8h8imei Overall dimensions

more

Listing

Straßwalchen

8247 km

Ott 300K-160S

1981

ready for operation (used)

€20,000

ONO plus VAT

Call

Hydraulic press with conveyor belt feeding and block tipper B9guvpxht8 Pressing area 122cm x 420cm

more

Listing

Conegliano

8332 km

Sanding Bench

Salvamac CLEAN 2000

2021

new

Call

“CLEAN” series sanding benches for aspiration are made of strong press-bent galvanized sheet iron, with a work surface with eyelets. They are indicated for aspiration of generic dust, with the exception of detonating or explosive dust. Hkc8llop The sanding benches series “CLEAN” must be connected to unit filtering with electric fan (not provided). Made with galvanized sheet iron (not painted)

more

Listing

Naprawa

8496 km

WEINIG U22E

used

€7,755

SCM PROFISET 60 EP four side planer

Call

Technical data: Max planing width: 240 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle sequence: Crv79dxzrj down 4 kW right 4 kW left 5.5 kW right 5.5 kW up 5.5 kW down 4 kW feed 4 kW Each spindle on a separate motor Grooved top Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 2 Extraction port diameter: 120/140 mm Smooth feed adjustment: 6-36 m/min Cardan feed Table lubrication pump Pulling rollers on the countertop Pressure: ...

more

Listing

Karsin

8083 km

SCM profiset 60

2014

like new (used)

€21,500

Call

"EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed sha...

more

Listing

Nevers

(dealership location)

7693 km

SCM Moulder COMPACT 22S

ready for operation (used)

€11,000

Call

Technical characteristics Capacity 220 x 120 mm , mini 25 x 6 mm Input table 2000 mm 4 tool holders Composition : Horizontal lower spindle: 5.5 hp al 40 Right spindle / left spindle : vertical axis stroke 7.5 hp al 40 Horizontal upper shaft 5.5 hp al 40 Max tool Ø 180 mm Drive 5 to 20 m/min Lubrication in the table Ideal for cabinet making Power and Motors Cuy8lqwpuu Overall dimensions Length: 3500 mm Width: 2000 mm Height: 1500 mm ...

more

Listing

Naprawa

8496 km

A.Costa EURO K23

used

Call

Listing

Nevers

(dealership location)

7693 km

SCM Moulder SUPERSET PLUS

ready for operation (used)

€48,000

Call

Technical characteristics 8 shafts Table 1500 mm Feed rate 6-36 m/min Composition : Horizontal lower 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Vertical left 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal lower 40 mm 7.5 kW Universal 40 mm 7.5 kW SUPERSET quick adjustment of tool diameters 2nd straight indexable spindle moulder Drive in the table + short wood Ideal for high finishing, joinery, planing and profiling of sh...

more

Listing

Naprawa

8496 km

PINHEIRO 38/22

used

Call

Listing

Nevers

(dealership location)

7693 km

TSN 4 faces Moulder

ready for operation (used)

€20,000

Call

Technical characteristics Power and Motors Pluging: Three-phased Overall dimensions Snuzj

more

Listing

Naprawa

8496 km

Leadermac 723 29/22

used

Call

Technical data: Max planing width: 240 mm Cjx8e2pwq2 Max planing height: 170 mm Spindle diameter: 40 mm Number of spindles: 7 Spindle sequence: down 5.5 kW right 5.5 kW left 5.5 kW right 11 kW up 7.5 kW down 7.5 kW universal 7.5 kW Each spindle on a separate motor Toothed pulling shafts: 8 Extraction port diameter: 120 mm Smooth feed adjustment Cardan feed Table lubrication pump 3 pulling rollers in the tabletop Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Leng...

more

Listing

Nevers

(dealership location)

7693 km

WEINIG Moulder UNIMAT 23E

ready for operation (used)

€35,000

Call

Technical characteristics Power and Motors Voltage: 230 V Pluging: Three-phased Power: 54 Kw Overall dimensions Cuy8uozyns

more

Listing

Naprawa

8496 km

SCM Sintex NTE 35/22

used

Call

Technical data: Max planing width: 180 mm Max planing height: 120 mm Spindle diameter: 35 mm Number of spindles: 4 Spindle order: bottom, right, left, top Motor power of individual spindles: down + up 7.5 kW right + left 7.5 kW feed 1.1 kW Electric head adjustment up/down Toothed pulling shafts: 4 Introducing toothed roller in front of the first head Extraction port diameter: 150 mm Smooth feed adjustment: 6-12 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the bo...

more

Listing

WEINIG WEINIG moulder HYDROMAT 23 - C2893.2

Nevers

(dealership location)

7693 km

WEINIG WEINIG moulder HYDROMAT 23 - C2893.2

ready for operation (used)

€50,000

Call

Technical characteristics Feed 60m/min Chrome table Fz8i9qx 5 shafts (right router, left router, right router, upper planer, lower planer) 400V 3Ph 50kW Input and output mechanization in option Power and Motors Pluging: Three-phased Overall dimensions

more

Listing

Naprawa

8496 km

Leadermac 723c

used

Call

Technical data: Max planing width: 250 mm Max planing height: 170 mm Spindle diameter: 40 mm Number of spindles: 7 Order of spindles: down 5.5 kW right 5.5 kW left 5.5 kW up to 5.5 kW top 7.5 kW left 7.5 kW right 7.5 kW Feed motor power: 3 kW Each spindle on a separate motor Toothed pulling shafts: Extraction port diameter: 120 mm Smooth feed regulation Cardan feed Pump for lubrication of the working table 4 pull rollers on the table Pressure: 6 atm. Electric lifting of the body Power supply: 4...

more

Listing

Nevers

(dealership location)

7693 km

Automatic feeder CN3

ready for operation (used)

€11,000

Call

Technical characteristics C7tmjojm0 Power and Motors Pluging: Three-phased Overall dimensions

more

Listing

Naprawa

8496 km

WEINIG Profimat 22N

used

Call

Technical data: Max planing width: 250 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Order of spindles: bottom 4 kW right and left 5.5 kW Cfr9lxrjyz up to 4 kW Feed motor power: 2.2 kW Each spindle on a separate motor Number of top pulling steel rollers: 5 Number of top pulling rubber rollers: 2 1 pull roller in the table top Extraction port diameter: 140 mm Smooth feed regulation: 6-22 m / min Cardan feed Pump for lubrication of the working table Pressure: 6 atm. ...

more

Listing

Nevers

(dealership location)

7693 km

WEINIG Moulder UNIMAT 500

ready for operation (used)

€35,000

Call

Technical characteristics Capacity: 230 x 120 mm J0cdfa Entry table 2500 mm 5 SHAFTS Lower spindle Right hand spindle moulder Left spindle moulder Upper planer Lower planer Digital positioning 40 kW Feed speed 5-30 m/min Power and Motors Overall dimensions

more

Listing

Naprawa

8496 km

Leadermac Hypermac 823 7+1

used

Call

Technical data: Max planing width: 240 mm Max planing height: 160 mm Spindle diameter: 40 mm Number of spindles: 7 + 1 Order of spindles: down 5.5 kW right 5.5 kW left 5.5 kW right 5.5 kW up to 5.5 kW down 5.5 kW up to 5.5 kW Nonlv9ch universal 7.5 kW Each spindle on a separate motor Roller introducing toothed torsion pulling 10 top pull steel rollers 5 top-pulling rubber rollers 6 pull rollers in the table top Extraction port diameter: 150 mm Smooth feed regulation: 6-36 m / min Cardan feed Pu...

more

Listing

WEINIG CNC Moulder POWERMAT 500 POWERLOCK

Nevers

(dealership location)

7693 km

WEINIG CNC Moulder POWERMAT 500 POWERLOCK

ready for operation (used)

€68,000

Call

Technical characteristics 8000 rpm capacity 260 mm x 160 mm 5-30m/min 5 POWERLOCK spindle Snuyl jointer 15 HP right router 10 HP left router 10 HP upper planer 15 HP lower planer 10 HP radial and beam axial adjustment by numerical control control panel modem connection Power and Motors Pluging: Three-phased Overall dimensions

more

Listing

Nevers

(dealership location)

7693 km

WEINIG Moulder UNIMAT 22 A

ready for operation (used)

€12,000

Call

Technical characteristics Gjqakqbd Power and Motors Pluging: Three-phased Overall dimensions

more

Listing

Nevers

(dealership location)

7693 km

WEINIG Moulder slice cutting UNIMAT 23E

ready for operation (used)

€46,000

Call

Technical characteristics Composition (7 shafts) : Planer 7.5 kW Right hand spindle moulder, Left hand spindle moulder 11 kW Planer 11 kW Planer 7,5 kW Right hand spindle 18,5 kW (possibility to install lenght cutting blades) Left hand spindle 18,5 kW (possibility to install lenght cutting blades) Shaft diameter 40 mm Feeding speed : up to 24 m/min Cuy8tsghrp Working width: 230 mm Working height: 120 mm Speed of rotation of the shafts 6000 rpm Cast iron frame, cast iron t...

more

Listing

Nevers

(dealership location)

7693 km

TSN 5 tool holders moulder CORROPROFIL

ready for operation (used)

€24,000

Call

Technical characteristics 220 x 160 infeed table 2500 mm short wood presser air cushion table double bearing horizontal shafts motorized height / width L220 4 kW jointer straight spindle moulder H 160 4 kW left rotor 4 kW Frafwxz top planer 5.5 kW universal 5.5 kW Number of tools: 5 Shaft diameter: 50 mm Power and Motors Overall dimensions

more

Listing

Nevers

(dealership location)

7693 km

SCM Moulder SUPERSET XL

ready for operation (used)

€26,000

Call

Technical characteristics Capacity 230 x 130 mm Centralized lubrication Pneumatic pressure Cuy8finzp9 Short wood training Composition: Thicknesser 7.5 kW Straight spindle 7.5 kW Left spindle 7.5 kW 10 kW planer Lower planer 7.5 kW Universal 15 kW with inverter Entry table length: 2500 mm Number of tools: 6 dont un universel Maximum advance speed: 5 à 25 m/min Power and Motors Overall dimensions

more

Listing

Nevers

(dealership location)

7693 km

SCM Moulder SUPERSET 23+

ready for operation (used)

€30,000

Call

Technical characteristics Capacity 230 x 130 mm Entry table 2500 mm Slotted table Short wood Composition : Pbjgf3o 1st shaft lower groove: 5.5 kW Right spindle moulder 7.5 kW al40 Left spindle moulder 7.5 kW al 40 Top planer 7.5 kW SUPERSET adjustment 2nd upper planer 7.5 kW SUPERSET setting Lower planer 5.5 kW Quick setting of tool changes SUPERSET with digital display Drive in the table Pneumatic press Roller guide for additional feeder Feed rate 6-36 m/min with mechanical va...

more

Listing

Nevers

(dealership location)

7693 km

WEINIG Moulder U22 A

ready for operation (used)

€40,000