Used glue coating machines for sale (81)

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Bsdoy E Avlopfx Ab Nodd Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Features and technical data: Uniform and consistent application across the entire working width due to an innovative technical solution and special vibration dampers, which compensate for potential deviations with uneven panels. Application ROLLS: with a special coating made of "acid-resistant synthetic rubber," allow for various adjustments, thereby ensuring a long service life. Homogeneous GLUE DOSING thanks to adjustable distribution trays. Accident-proof SAFETY DEVICES on all moving parts ensure maximum operator safety. ELECTRICAL SYSTEM: perfectly sealed and compliant with European standards, equipped with a push-button control panel, 24 V voltage. Technical data: Working width: 1300 mm Working height: 100 mm Application roller diameter: 185 mm Bdedpfxjygn Ihs Ab Ned Feed speed: 18 m/min Drive motor: 0.37 kW Working table height: 800 mm Dimensions: Length 780 mm, Width 2000 mm, Height 1350 mm Weight: 340 kg Incl. stainless steel (INOX) water collection tank Location: Flörsheim Availability: Immediate

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Condition: factory-reconditioned by Osama Technologies Equipment and technical data: - Automatic gluing machine with two rollers - Working width 1000 mm - Usable working thickness 0-100 mm - Application roller diameter 185 mm - Feed speed 24 m/min - Height of the working surface 800 mm - Roller groove spacing 2 mm Bedpswkbb Djfx Ab Njdd - Motor power 0.37 kW - Glue distribution container made of painted sheet metal - Water tank made of galvanized sheet metal - CE marking - Voltage 400/50/3Ph Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Features and technical specifications: - Bag melter for 2 to 3 kg aluminium bag units - Type of glue pump: gear pump - Pump rated speed: 93 rpm - Basic tank size (reservoir): approx. 2 l/h - Melting capacity: up to 5 l/h - PT-100 temperature sensor for device and external heaters - Control precision: +/- 1° C - Heaters (device): 2 heating zones; basic tank and pre-melting plate, separately adjustable - Connected load: 5 kW Dimensions: 1100 x 500 x 1100 mm Weight: approx. 110 kg Availability: short-term Bedpfow Rhlbjx Ab Nodd Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Fe-Ma-Tech Bag Melter Glue Application Unit: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition Bdjdew I S Eaopfx Ab Ned - Weight: approx. 70 kg - Dimensions: 550 x 430 x 970 mm - Type of glue pump: Gear pump - Pump nominal speed: 93 rpm - Base tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heating / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg. Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts. Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed. A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive. From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly. Shipping via freight forwarding is available for an additional €190.40 #8404

Condition: excellent (used), Catalogue number 7721 TECHNICAL DATA - Working width: 1300 mm - Max. pass-through height: 60 mm - Rubber rollers: 2 pcs - Rubber roller diameter: 190 mm - Motor approx. 1.1 kW - Dimensions (L/W/H): 2020x770x1260 mm - Weight: 500 kg ADVANTAGES – used glue applicator – condition: very good Bdjdpey S Advefx Ab Nsd Net price: 14,900 PLN Net price: 3,540 EUR depending on 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: like new (used), working width 1350mm cleaning brushes Bdedpfxezimfij Ab Nsd adhesive application rate adjustment via a metering roller safety switch

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm Bdsdszc Nmwjpfx Ab Njd - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Bodpfxjd Iz Dfj Ab Nedd Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. Bodpfju I R Utex Ab Nodd The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz Bdodpfx Abodwi Rks Njd complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping. Bjdpfey D Hfzex Ab Nedd

Condition: good (used), Code: 0397 Brand: ITALPRESSE Model: R4/130 - CE Standard Automatic 4 rollers glue spreader for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard Bdsdpfxozbmxus Ab Nsd Technical specifications: Working width mm 1300 Max working passage mm 100 Power 0,75 Kw Spreading rollers diameter mm 210 Variable roller feed speed Automatic rollers cleaning Motorised outfeeding discs Overall dimensions mm 2150 x 1100 x 1600 h Weight kg 750

Condition: excellent (used), Year of construction: 1998, HÖFER LAN 1300 Adhesive Coating Machine For the efficient application of water-soluble dispersions (white glue, etc.) on one or both sides. Coating width: maximum 1300 mm Drive: 0.37 kW geared motor Rubber-coated coating rollers: Ø 170 mm Bdjdpfxeza A Aas Ab Nod Grooving for coating quantity: approx. 120 g/m² (for veneers) Constant coating speed: approx. 16 m/min Working height: approx. 900 mm Maximum workpiece thickness: 80 mm Design complies with CE standards Manual feed Operating side: right Including swivel casters Machine dimensions L x W x H = 1750 x 660 x 1300 mm

Condition: good (used), Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Bdedpeyi E Hgsfx Ab Nsd Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Condition: excellent (used), Code: 0005 Brand: OMMA / OTHER BRANDS 2300 Bdodpfjiyqdvjx Ab Nod Model: 2300 Nr 2 rubber-coated rollers Technical data Length mm 2300 Diameter mm 230 Rifling 3,4 x 1 cm / 9 x 1" (inch) Overall dimensions of wooden crate for 2 rollers: mm 3000 x 900 x 550 h Weight kg 800

Condition: excellent (used), functionality: fully functional, OSAMA S2R-1000 Double-Sided Glue Applicator Working width: 1000 mm Min./max. gap height: 0-90 mm Diameter of application rollers: 185 mm Feed speed: 18 m/min Bodpfx Abjzaqlps Njdd Motor: 0.37 kW Technical documentation CE certificate

Condition: good (used), Year of construction: 2021, functionality: fully functional, PUR melting device for aluminum pouches/cartridges, with hose and filling head for use on edge banding machines Weight approx. 73 kg Melting capacity up to 2 kg Gear pump Bedpfx Abey S Rw Re Nsdd All heaters can be adjusted separately With electronic interface for glue level detection in the gluing section of the edge banding machine (level sensor "Tippkemper" for glue application, provided by the edge banding machine manufacturer) Connection value 400 V, 50 Hz, 3Ph, N Device delivered completely cleaned and with PUR cleaner.

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Bdedpfx Abjxcwr He Njd Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Bdedpsxcw Afefx Ab Ned Year of manufacture: 2017 Motor power: 0.75 kW

Condition: like new (used), functionality: fully functional, Single-sided glue applicator OSAMA S2R-1300 Bedpfjx Tha Sex Ab Nedd Working width: 1300 mm Min./max. clearance height: 0-90 mm Applicator roller diameter: 185 mm Feed speed: 18 m/min Motor: 0.37 kW Upper roller: grooved Lower roller: smooth New rubber roller coverings

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,300 mm, input voltage: 380 V, overall weight: 360 kg, roller diameter: 185 mm, height adjustment type: mechanical, working height: 120 mm, Roller glue spreader FIN SC2R-1300 Working width: 1300 mm Working height: 120 mm Bdjdpfx Abex Af Nye Njd Manual roller gap adjustment Roller diameter: 185 mm CE certificate Power: 0.37 kW Weight: 360 kg

Condition: excellent (used), Year of construction: 2018, Roller glue spreader OSAM S2R-1300 + disc table OSMA TDM Working width: 1300 mm Maximum working height: 100 mm Manual adjustment of working height 2 glue rollers (top and bottom) Disc table OSAMA TDM 1300-3000 Bjdsxrdv Djpfx Ab Njdd CE marking Year of manufacture of the set: 2018

Condition: excellent (used), functionality: fully functional, Frama MDC 1300 Roller Glue Spreader Working width 1300mm Bdjdsv R Ti Ispfx Ab Njd Working height 70mm Feed speed 16.5m/min Feed motor 0.3kw CE certificate Year of production 1999 Weight 332kg

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules Bjdpfst Nfarsx Ab Nodd • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE