Condition: used, Year of construction: 2008, x-travel 2.500 mm y-travel 1.500 mm z-travel 1.500 mm Control iTNC 530 tool taper DIN 69871 AD rotary table 1.250 x 1.600 mm/min tool magazin: 40 pos. feed 25 m/min milling head -swivable +/- 2,5 x 2,5 ° Bolt ISO 50 DIN 69871/1-AD turning speeds 871-3.000 U/min transmission ratio 2 Internal cooling system 20 bar handwheel HR 420 Machine on 24.905 h total power requirement 80 kWA Fgolju S Rybsqz Dlzob weight of the machine ca. 35 t

Year of construction: 1993, Condition: ready for operation (used), Drilling machine Schüco 293784, built 1993, for drilling door hinges, 8 drill shots, Fslqz Dled R Sdyjzjgb

Condition: new, Milling drill with gears Fervi T047/400VDA tapping 400V 1,5kW NEW MANUFACTURING " CE ". The machine can be used for the processing of: Milling Drilling Tapping. Drilling capacity on cast iron with pre-hole : ø 40 mm. Max. drilling capacity on steel with pre-hole: 32 mm dia. Milling capacity with insert cutter : 80 mm dia. Milling capacity : Ø 25 mm. Tapping capacity : Ø 22 mm. Conical shank : CM 4. Spindle stroke : 130 mm. Sleeve : ø 76 mm. Column : ø 115 mm. Head inclination : ± 60°. Spindle speed : (12) 75 ÷ 3200 rpm. Three-phase motor : 400 V 50 Hz 1,1 - 1,5 kW. Table dimensions : 585 x 190 mm. Keyway : 12 mm. Fslqz Dljg Npiwezogb Base dimensions : 648 x 412 mm. Overall dimensions: 740 x 790 x 1960h mm. Weight : 390 Kg.

Condition: used, Box column drilling machine WEBO Series No. 132 Machine No.: 9 Drilling capacity 50 mm Spindle cone MK 5 - long spindle Thrust 430 mm Pendulum stroke 280 mm Drill head height adjustment 500 mm Table size Ø 725 mm Distance between drilling spindle and table max. 740 mm Distance between drilling spindle and clamping surface on the machine base max. 1240 mm Spindle speed 55-820 rpm. Feed level 1 mm/rev Feed level 2 mm/rev Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 volts, 50 Hz - Spindle speed via 2 motor speeds and continuously via variator - Manual drill head height adjustment via hand crank, clamping using clamping screws - Rotating drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on the machine base 600 x 550 mm Overall height of drill head above 3020 mm Fslsqa Txqjqz Dlzegb Overall height of drill head below 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg Good condition

Condition: ready for operation (used), Year of construction: 2017, Main Drive Fgolqz Dlsuc Hpmozeb Number of axis 3 Additional Equipment Working table with counter-pressure Pliers with system for measuring thickness Laser-based reading system for recognizing zero joints and panel end Top reading system of foto cells for recognizing panel heights Tool changer with 8 positions Milling unit of 5.5 kW Drilling unit with 23 tools Software: bSolid This 3-axis BIESSE BREMA EKO 2.1 drilling machine was manufactured in 2017. It features a tool changer with 8 positions, a milling unit of 5.5 kW, and a drilling unit with 23 tools. The working table includes a counter-pressure system and pliers with a thickness measuring system. Ideal for handling panel sizes up to 2600 mm in length and 900 mm in width, the BIESSE BREMA EKO 2.1 represents a robust addition to any workshop. Contact us for further details. Application Types Boring & Drilling (Wood)

Condition: good (used), Data : Fgslqz Dsv Dfncjlzjb Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Year of construction: 2007, Condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres Foljq Hgg Ujqz Dlzogb ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed length W-axis: 800 mm, workpiece weight (max.): 12,000 kg, worktable width: 1,800 mm, worktable length: 1,800 mm, WHQ13.8-CNC/30 ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ PRODUCTION YEAR: 1980 ■ MODERNISATION AND OVERHAUL YEAR: 2005 (RETOS) ■ REPAIR YEAR: 2025 (RETOS) ■ CONDITION: USED, EXCELLENT ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ HEIDENHAIN iTNC530 control system + handwheel ■ SIEMENS motors and drives ■ CHZ13 - tool cooling - emulsion ■ ATC60 - automatic tool changer ■ operator platform SCOPE OF REPAIR 2025 ■ Cleaning ■ Revision and machine geometry adjustment ■ Revision of machine functionality ■ Revision of electrical equipment ■ Revision of hydraulic and lubrication ■ Clearance adjustment and drive optimisation Fjljvbfxpsqz Dlzsgb ■ Replacing of guideway wipers ■ Repair of machine telescopic covers ■ Replacing of counterweight cables ■ Repair of operator platform ■ Revision of tool cooling CHZ13 ■ Revision of automatic tool changer ATC60

Condition: good (used), – MK4 – 60/2400 rpm – 2-speed motor – Rotating table Folqz Dev Rpypolzogb – Machine clamp – 380V

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 1,000 h, Very little running time Technical data: Spindle diameter - 130mm Spindle Type - ISO 7:24 No50 Spindle Speed - 3000 RPM W axis - 800mm Y axis - 2000mm Z axis - 1600mm X axis - 4000mm Table size - 1800x2200mm Fjlqz Dopa N Uhelzsgb Table loading capacity - 10.000kg General dimensions - 6800x6300x4600mm Machine Weight - 35000kg

Year of construction: 2005, Condition: ready for operation (used), General Data Machine weight 38500 kg Main Drive Spindle speed range 3000 rpm Number of axis 4 Movement X-Axis Movement 3100 mm X-Axis Rapid Traverse 14000 mm/min Y-Axis Movement 2000 mm Y-Axis Rapid Traverse 14000 mm/min Z-Axis Movement 1600 mm Z-Axis Rapid Traverse 14000 mm/min W-Axis Movement 600 mm W-Axis Rapid Traverse 7000 mm/min This 4-axis NORDEST HYDRA MP 110 boring machine was manufactured in 2005. Ideal for precision boring tasks, it offers robust construction and reliable performance. If you are looking to get high-quality boring capabilities, consider the NORDEST HYDRA MP 110 machine we have for sale. Contact us for more information. Felqz Djv Dnipelzsgb Application Types Other Machine Tools

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 40 mm throat 340 mm bore stroke 170 mm Fgelqz Dev Rgx Nolzsb table surface area 560 mm

Year of construction: 2010, Condition: good (used), Main Technical Specifications Profiles to be processed • Max. section volume mm 1100 x 1100 • Bar length max. metres 12 Drilling Capacity Felqjig T Axez Dlzogb • Drill heads no. 1 • Spindles per vertical drill head no. 1 • Drilling diameter max. mm 31.75 • Drilling diameter (with reduced feed) max. mm 40 • Power per head (a.c.) kW 5,5 • Program controlled spindle rotation speed with continuous variation RPM 180 - 1000 Other Specifications • X axis positioning speed (portal) mt/min. 20 • Y axis positioning speed (drill head) mt/min. 4

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, feed length X-axis: 5,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 2,200 mm, feed length W-axis: 800 mm, rotational speed (max.): 3,000 rpm, workpiece weight (max.): 16,000 kg, worktable width: 2,500 mm, worktable length: 3,000 mm, WHQ13CNC ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ PRODUCTION YEAR: 2013 ■ REPAIR YEAR: 2025 (RETOS) ■ CONDITION: USED, EXCELLENT ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ HEIDENHAIN iTNC530 control system + handwheel ■ SIEMENS motors and drives ■ CNC table - full B axis controll ■ CHOV-K 20bar - cooling through spindle axis – emulsion ■ ATC60 - automatic tool changer ■ operator platform ■ CE - operator platform and fencing ■ swarf conveyor SCOPE OF REPAIR 2025 ■ Cleaning ■ Revision and machine geometry adjustment ■ Revision of machine functionality ■ Revision of electrical equipment ■ Revision of hydraulic and lubrication Fjlqz Dljviuvgjzegb ■ Clearance adjustment and drive optimisation ■ Revision of tool cooling CHOV-K 20 bar ■ Revision of automatic tool changer ATC60

Condition: ready for operation (used), For sale is the Weyrach CNC drilling center with a Siemens Sinumerik 805 control system. The machine is in working order. The machine has been inspected and tested for functionality (see service report). Drive and control components are available upon request from Allemdninger and can also be repaired and replaced if necessary. Weight approx. 5-6 tons Machining area approx. 800 x 5000 mm Machine dimensions: approx. 6500 x 1400 x 2500 mm Sold without warranty, ex works, duty unpaid. Felqz Dlouphy Iozjgb SPECIAL PRICE €5,550 plus VAT

Condition: used, bore capacity in steel (diameter) 28 mm x-travel 400 mm y-travel 285 mm turning speeds 45-4000 U/min total power requirement 3,6 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,0 x 1,4 x 2,1 m - POS+MAT table - ALBRECHT tool quick change system Fslqeui T D Soz Dlzegb - Vices

Year of construction: 2009, Condition: ready for operation (used), Control Unit Brand SELCA Model 4045 Main Drive Number of axis 3 Movement X-Axis Movement 2200 mm Y-Axis Movement 1000 mm Workpiece Workpiece weight 10000 kg Tools Fgelqzou Uwd Ee Dlzeb Number of index 108 This 3-axis IMSA TIPO MF1100BBLL 6P boring machine was manufactured in 2009. It features a large table size of 1000x1200 mm and can handle a maximum workpiece weight of 10000 kg. The spindle operates at 4000 rpm with an ISO 40 attachment and a generous 108 tool capacity. If you are looking to get high-quality boring capabilities, consider the IMSA TIPO MF1100BBLL 6P machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Y300mm Z300mm tool clamping hydraulic Feljrq D Ukeqz Dlzogb inverter on spindle SK40 machine in very good condition

Condition: used, Year of construction: 1999, x-travel 500 mm Folqz Djvy Ikfelzsgb y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 310 tool taper SK 40 speeds 20-4500 U/min weight of the machine ca. 3 t dimensions of the machine ca. 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation

Condition: ready for operation (used), MAS VR4A radial drilling and milling machine Type: VR4A Height adjustment 750 mm Throat 1250 mm Spindle diameter: 80 mm Mounting MC5 Spindle stroke: 300 mm Speed: 2500 rpm Bed: 760 x 1400 mm Dimensions: 225 x 90 x 255 cm LxWxH Weight 3200 kg With separate coolant tank and pump Fslsv Nzcajqz Dlzjgb

Year of construction: 2021, Condition: as good as new (ex-display), machine/vehicle number: 607-9027, PROFILE DRILLING MACHINE PBA 3000 for the rational and efficient production of holes in beams, profiles, tubes and other long parts Technical data: Max. Max. travel x-axis 3000 mm, Max. Max. travel y-axis 250 mm, Max. Max. travel z-axis 350 mm, Max. Support length 5700 mm (due to extendable support rollers), Max. support weight 500 kg 3 pcs. mech. vices Röhm BOF 4: Clamping width max. 220 mm, clamping width 160 mm, jaw height: 50 mm; Digital position indicator (accuracy +/-0.1 mm); Fgjlqz Dlerdx A Sjzeb Stop points: 10 pieces Drilling unit Maxion Unimax 3T AV Technical data: Motor 1.5 kW, 400 V Drilling capacity in St 37 ø 35 mm Continuous drilling capacity in St 37 ø 26 mm Thread cutting in St 37 M16 Spindle holder MK 3 Spindle stroke 125 mm Speed range max. 3200 min-1 Automatic height adjustment z-axis Minimum quantity lubrication Pneumatic thread cutter M3-M12 Subject to prior sale. No warranty for misprints and errors.

Condition: used, Technical Specifications: Tool Holder: MT 3 Drilling Capacity: 32 mm Speed Range: 65 - 1750 rpm Spindle Stroke: 160 mm Throat: 293 mm Fslqov Av Tmoz Dlzegb Column Diameter: 115 mm Motor Power: 1.1 kW Features: - Machined base with T-slots - Emergency Stop Button - Drilling Depth Stop - Reversible Travel

Year of construction: 2015, Condition: excellent (used), CNC Traveling Column Horizontal Boring and Milling Machine Mitsubishi MAF180C Spindle Diameter 180MM Vertical Head Travel, Y-Axis 5000 MM Column Travel, X-Axis 17998 MM Ram Travel, Z-1 Axis 1250 MM Spindle Travel, Z-2 Axis 1000 MM Ram Cross Section 420MM x 420MM Total Axial Travel 2250MM Spindle Taper ISO 50 Spindle Speeds 6-2500 RPM Equipped with: Fanuc 31iMB CNC Control 100-Station Automatic Tool Changer Fgjlqzewbnqmo Dlzsb Right Angle Milling Heads 4000MM x 4500MM In-feeding CNC Table Floor Plates Telescoping Steel Way Covers Operator's Platform 86KW Spindle Motor

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 00-1646/1, drilling depth: 700 mm, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,670 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, table load: 10,000 kg, travel distance W-axis: 440 mm, Equipment: chip conveyor, • Manufacturer: Buck Maschinenbau GmbH !!! Spring Special Offer €108,000!!! • Machine number: 00-1646/1 • Working area (mm): X 1600, Y 1200, Z 1600 • Manual W-axis 500 mm, B-axis, A-axis pivotable 19° • Fully enclosed machine • Chip conveyor and high-pressure coolant system • SK50 tool holder • Heidenhain TNC 430 control system • Table load: 10 tons workpiece weight • Spindle speed: 6,000 rpm • Rapid traverse speed: 20 m per minute • Tool changer for 20 tools Fgslju Hzqceqz Dlzob • The machine can be inspected with power on at any time by appointment

Condition: ready for operation (used), Year of construction: 1998, Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunging spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – self-drive Feed rate: 20 – 500 mm/min Rapid traverse speed in NC mode: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Maximum stroke: 200 mm Transport weight: 3200 kg Control system: Siemens Fgolqz Djv Tdkholzsb