English
German English Dutch Dutch

Pillar drilling machines 20-29mm bore capacity used for sale

71 Results for
Cancel
FORMAT SB 32 AV FORMAT SB 32 AV FORMAT SB 32 AV FORMAT SB 32 AV FORMAT SB 32 AV FORMAT SB 32 AV
more images
6
Call
New York United States
1921 km
1994
good (used)
Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 6...
FLOTT SB 23 FLOTT SB 23 FLOTT SB 23 FLOTT SB 23 FLOTT SB 23 FLOTT SB 23 FLOTT SB 23
more images
7
Call
Ahaus, Germany Germany
(dealership location)
7617 km
used
Boring power 23,0 mm bore capacity in cast iron 25,0 mm Center of spindle to wall or column 250 mm bore stroke 100 mm Size of table plate Ø 325 mm Speed 430 - 4500 U/min. spindle taper MT 2 MK voltage 380 V Motor output 1,5 KW weight of the machine ca. 225 kg range L-W-H 650 x 450 x 1800 mm ** from a vocational training center (!!) Furnishing: Dyiqfe - manual spindle feed - V-belt drive - Chuck guard at the front - Height-adjustable work table, by hand crank - EMERGENCY STOP button at the fr...
EIKO B2 EIKO B2 EIKO B2 EIKO B2 EIKO B2
more images
5
Call
Leipzig, Germany Germany
(dealership location)
7963 km
1961
used
bore capacity in steel (diameter): 20 mm throat: 200 mm bore stroke: 100 mm spindle taper MT: 2 column diameter: 80 mm revolution per minute: 500-800-1250-2000 U/min drill table: 340x280 mm Bnssz3y8 table rotating: 360 ° table adjustment: 650 mm total power requirement: 0,4 kW machine weight approx.: 186 kg space requirement of the machine approx.: 0,8,x0,5x1,8 m
Optimum Optidrill D 26 Pro - Set
more images
1
Call
Bitburg Germany
7719 km
2022
as good as new (ex-display)
OPTIdrill D 26PRO - column drilling machine Bench and column drilling machine with belt drive Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton 400 Volt models with right/left rotation Drilling depth stop Precision machined table with diagonal T-slots Height adjustment of the drilling table with rack and pinion Drill table ± 45 ° tilt and 360 ° V-belt cover with safety switch Aluminium die-cast tailstock lever from one piece with Softgrip-hand...
REXON RDM 80 B REXON RDM 80 B
more images
2
Call
Ennepetal, Germany Germany
(dealership location)
7683 km
used
bore capacity in steel (diameter) 20 mm turning speeds Max. 2580 U/min Byqkwdoxim tool adaptor MK2 weight of the machine ca. 0,05 t
Alzmetall AC 25 AS Alzmetall AC 25 AS Alzmetall AC 25 AS Alzmetall AC 25 AS
more images
4
Call
Düsseldorf Germany
7661 km
1991
good (used)
Technical data - Clamping surface (left-right): 390 mm - Clamping surface (front-rear): 420 mm - Control: electronic control - quill stroke: 120 mm - Speed range up to: 7500 rpm - Tool holder: MK 3 - Connection voltage: 400 V - Mains frequency: 50 Hz - Total height approx.: 1.90 m - Documentation - Weight approx.: 400 kg B3qy3wxxp8
OPTIMUM Opti drill B28 H vario OPTIMUM Opti drill B28 H vario OPTIMUM Opti drill B28 H vario
more images
3
Call
Goldenstedt, Germany Germany
(dealership location)
7654 km
used
bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm Bgqhq98lwi spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm
FLOTT E3/R2 FLOTT E3/R2 FLOTT E3/R2 FLOTT E3/R2 FLOTT E3/R2 FLOTT E3/R2 FLOTT E3/R2 FLOTT E3/R2 FLOTT E3/R2
more images
9
Call
Ahaus, Germany Germany
(dealership location)
7617 km
used
Boring power 25,0 mm bore capacity in cast iron 30,0 mm Center of spindle to wall or column 285 mm bore stroke 90,0 mm Size of table plate 340 x 280 mm Speed 125 - 2500 U/min. I3siu3d2 spindle taper MT 3 MK voltage 400 V Motor output 0,9/1,3 KW weight of the machine ca. 205 kg range L-W-H 460 x 740 x 1800 mm Furnishing: - manual spindle feed - Pole changing motor - V-belt drive - Fixed drilling depth stop - Height-adjustable work table, by hand crank
KAPEMA BM 25 KAPEMA BM 25 KAPEMA BM 25 KAPEMA BM 25 KAPEMA BM 25 KAPEMA BM 25
more images
6
Call
Bünde, Germany Germany
(dealership location)
7699 km
new
bore capacity in steel (diameter) 25 mm throat 255 mm bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW weight of the machine ca. 190 kg dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Condition: unused W3ubo Electric 380 Volt Drill chuck Machine dealer with own stock of 2500 m².
FLOTT SB M3 ST
more images
1
Call
Nordrhein-Westfalen, Deutschland Germany
7694 km
2022
new
Duration / ALB ear power 25/30 mm Thread cutting capacity Max M20 Spindle MK III Drilling depth 125 mm Throat depth 260 mm Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 0.90/1.45 kW Spindle speed with idle, continuous 125-4000 1 / min Nclxh in 2 levels I: 125-2000 1 / min II: 250-4000 1 / min The levels change via belt ...
Flott SB 16 Flott SB 16 Flott SB 16 Flott SB 16
more images
4
Call
Gütersloh, Germany Germany
(dealership location)
7707 km
used
Spindle mount MT 2 Stepless speed adjustment B3akqn82jw
Optimum D23PRO-SET Optimum D23PRO-SET Optimum D23PRO-SET
more images
3
Call
Erwitte , Germany Germany
(dealership location)
7720 km
2021
new
Dimensions LxWxH: 615x330x1015 mm Net weight: 63.5 kg Spindle speed: 200-2440 rpm tool holder: MK2 Drilling capacity in steel: 25/20 mm engine power: 750 watts B2bwmpanq8 Throat: 180 mm Quill: 80 mm TECHNICAL SPECIFICATIONS electrical connection 400V / 3PH-50 Hz Motor power 750 watts Drilling capacity / continuous drilling capacity in steel 25/20 mm Tool holder MT2 Projection / quill stroke 180/80 mm Spindle speed / speed levels 200-2440 rpm / 12 Table size 280 x 245 mm Tilt the drilling table s...
FLOTT SB 23
more images
1
Call
Goldenstedt, Germany Germany
(dealership location)
7654 km
used
bore capacity in steel (diameter) 23 mm throat 300 mm Bgqhrjprkj bore stroke 150 mm table-size 300 x 410 mm spindle taper MK 2 total power requirement 1,4 kW weight of the machine ca. ca. 315 kg dimensions of the machine ca. ca. 700 x 900 x 1900 mm
BERNARDO GB 28 S BERNARDO GB 28 S BERNARDO GB 28 S BERNARDO GB 28 S BERNARDO GB 28 S BERNARDO GB 28 S BERNARDO GB 28 S
more images
7
Call
Ahaus, Germany Germany
(dealership location)
7617 km
new
bore capacity in steel (diameter) 28,0 mm threading 12 M bore stroke 130 mm throat 250 mm table: 375 x 375 mm morse taper 3 MK turning speeds 75 - 3.200 U/min total power requirement 1,1 / 1,5 kW weight of the machine ca. 215 kg. range L-W-H 450 x 600 x 2.020 mm Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to ...
GILLARDON GB 28 VE GILLARDON GB 28 VE GILLARDON GB 28 VE
more images
3
Call
Bünde, Germany Germany
(dealership location)
7699 km
new
bore capacity in steel (diameter) 28 mm throat 295 mm bore stroke 175 mm short taper MK 3 feeds 0,1+0,2+0,3+0,4 mm/U table-size 510 x 425 mm spindle turning speed - stepless 60 - 1600 U/min column diameter 115 mm distance between table/spindle max. 850 mm threading ST 60/GG 20 max. M 20 / M 24 drilling capacity steel/cast iron 32 mm distance spindle/base plate 1320 mm total power requirement 0,7/1,3 kW weight of the machine ca. 410 kg range L-W-H 960 x 650 x 1950 mm Electric 400 Volt Thre...
FLOTT SB P30 ST
more images
1
Call
Lüdenscheid, Germany Germany
(dealership location)
7705 km
2022
new
Drilling depth and speed display - digital thread cutting capacity M20 ( pitch dependent) infinitely variable speed from 125 - 4000 rpm in two steps, step change via belt reversal. drilling capacity 25/30 mm Ju9qee Thread cutting capacity (pitch dependent) M20 spindle MK 3 drilling depth 125 mm throat depth 280 mm Usable table area (swivelling) 420 x 340 mm Feed by hand Table height adjustment with toothed rack Machine dimensions (W x D x H) 520 x 820 x 1900 mm motor rotary current 400 V pole-ch...
CORDIA , BF 26 CORDIA , BF 26 CORDIA , BF 26
more images
3
Call
Schwabach Germany
8026 km
good (used)
. Technical data : . Drilling capacity 26 mm Milling work suitable for light chip removal Fzdlxsgpq 6 speeds 200 - 1450 rpm holder MK 3 quill stroke 100 mm column diameter 120 mm head height adjustable 330 mm , head tiltable and swivelling . .
IBERDRILL TL - 25 IBERDRILL TL - 25
more images
2
Call
Niederlangen, Germany Germany
(dealership location)
7581 km
new
bore capacity in steel (diameter) 25 mm throat -- mm bore stroke 120 mm tool taper MK 3 no. of turning speeds 8 speeds 65 - 3.060 U/min feed manuell / manual table surface area 300 x 270 mm Column-Diameter 100 mm distance spindle center to column 250 mm Motor output 0,82 / 1,2 kW dimensions of the machine ca. 2,14 x 0,6 x 0,8 m weight of the machine ca. 0,25 t Column drilling machine with gear drive and movable table lling capacity for gray cast iron (GG 20) Ø 30 mm Cmne9lsm eading capaci...
IXION BS 23 FST IXION BS 23 FST IXION BS 23 FST IXION BS 23 FST IXION BS 23 FST IXION BS 23 FST
more images
6
Call
Goldenstedt, Germany Germany
(dealership location)
7654 km
used
bore capacity in steel (diameter) 23 / 28 mm Be02auhwjo throat 260 mm bore stroke 120 mm tool taper MK 3 table-size 500 x 350 mm column diameter 100 mm total power requirement 1,3 kW weight of the machine ca. 400 kg dimensions of the machine ca. 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment
Infratirea G 25 Infratirea G 25 Infratirea G 25 Infratirea G 25 Infratirea G 25
more images
5
Call
Leipzig, Germany Germany
(dealership location)
7963 km
1970
used
bore capacity in steel (diameter): 25 mm throat: 310 mm bore stroke: 220 mm spindle turning speed - continuous: 40 - 1800 / 12 step U/min spindle taper MT: 4 Distance spindle/table max.: max: 730 - min: 100 mm feed: automatisch / 9 step mm/U table clamping surface:: 450x580 mm table-size: 550x660 mm table adjustable: vertikal: 320 mm table swivable approx.: nein total power requirement: 6,6 kW weight of the machine ca.: 652 kg dimension machine xH: 1,1 x 0,7 x 2,3 m - drilling capacity Ø in GG =...
Bernardo  GB 28 S Bernardo  GB 28 S Bernardo  GB 28 S Bernardo  GB 28 S Bernardo  GB 28 S Bernardo  GB 28 S
more images
6
Call
Mudersbach Germany
7748 km
new
Bernardo geared drill GB 28 S Technical specifications Bdt7u80eww Drilling capacity of Max 28 mm Thread cutting max. M12 Drill Chuck 1-13 mm / B-16 Dome MK 3 Spindle speed (12) 75-3200 RPM Throat depth 250 mm Distance from spindle / table max 810 mm Distance from spindle / base plate 1210 mm Quill stroke 130 mm Column diameter 100 mm Work surface of bottom plate 325 x 330 mm Table size / T - slot size 375 x 375 mm / 14 mm S1 motor power output 100% 0.85 / 1,1 kW (400 V) Motor power S6 40% 1.1 / ...
FLOTT SB 25 plus
more images
1
Call
Lüdenscheid, Germany Germany
(dealership location)
7705 km
2022
new
NEW column drilling machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED illumination - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Continuous/normal drilling capacity (mm): 23/25 - Tapping capacity (pitch dependent): M16x1 - spindle: MK III - drilling depth (mm): 115 - throat depth (mm): 260 - Usable worki...
HAHN & KOLB ubk. HAHN & KOLB ubk. HAHN & KOLB ubk. HAHN & KOLB ubk.
more images
4
Call
Eislingen, Germany Germany
(dealership location)
7987 km
used
bore capacity in steel (diameter):23 mm throat:280 mm Y7m79xueu bore stroke:220 mm Speed:1420 U/min. feed:0,1 - 0,3 m/min voltage:380 V workpiece height max.:950 mm surface area:500 x 500 mm machined bearing plate::Ja column diameter:140 mm table swivable ca.:180° total power requirement:1,1 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:1,4 x 0,6 x 2,05 m
ALZMETALL AB 3/ ESV ALZMETALL AB 3/ ESV ALZMETALL AB 3/ ESV ALZMETALL AB 3/ ESV ALZMETALL AB 3/ ESV ALZMETALL AB 3/ ESV ALZMETALL AB 3/ ESV
more images
7
Call
Rödermark Germany
7854 km
1998
good (used)
OFFER 21548 Technical data: - Drilling capacity in steel ST 60 28 mm B3yrvqiasw - drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable - stage 1. 65 - 240 rpm - stage 2. 130 - 480 rpm - stage 3. 240 - 875 rpm - stage 4. 800 - 1750 rpm - 3 feeds 0,1 / 0,2 / 0,3 mm/rev - throat 290 mm - max. distance table - drilling spindle 620 mm - table with 2 T-slots 450 x 450 mm - Height adjustable ...
Strands (Swedish Made high quality) S25
more images
1
Call
Åkervägen 18, 696 32 Askersund, Sweden Sweden
7593 km
2020
new
Column drilling machine Brand:Strand Type:S 25 Swedish made with over 100 year experience in production of high quality gear driven drilling and mill machines The gear box is built according to our well known approved technique for highest torque. Helical gears combined with steel gears against reinforced fiber gears ensure strong gear teeth’s, longer lifetime, low sound level and a more or less maintenance free gear box. Drilling capacity: 25mm (MK2) Quill movement: 130mm Distance drill – col...
GILLARDON GB 20 GILLARDON GB 20 GILLARDON GB 20 GILLARDON GB 20 GILLARDON GB 20 GILLARDON GB 20 GILLARDON GB 20 GILLARDON GB 20
more images
8
Call
Weißenhorn, Germany Germany
(dealership location)
8040 km
used
bore capacity in steel (diameter) 20 mm throat 285 mm bore stroke 150 mm clamping table 350 x 300 mm spindle turning speed range 150-3000 U/min E9bo027 total power requirement 0,5/0,9 kW weight of the machine ca. 0,3 t dimensions of the machine ca. LBH 0,65 x 1,0 x 1,84 m
Kazanlik BS 25 Kazanlik BS 25 Kazanlik BS 25 Kazanlik BS 25
more images
4
Call
Leipzig, Germany Germany
(dealership location)
7963 km
1966
used
bore capacity in steel (diameter): 25 mm throat: 320 mm bore stroke: 130 mm spindle speed:: 85 / 150 / 265 / 850 / 1500 mit 5 step U/min Bzelrmlqkx spindle taper MT: MK3 feed: 0,1 / 0,16 (z.Z. mit 2 Step) mm/U Distance spindle/table max.: 490 mm distance spindle/base plate: 1040 mm table clamping surface:: 400 x 400 mm table-size: B: 500 x T: 490 mm table adjustable: vertical: 410 mm table swivable approx.: 360 column diameter: 160 mm base plate working surface area: 440 x 550 mm total power re...
FLOTT SB P30 STG PV electronic
more images
1
Call
Lüdenscheid, Germany Germany
(dealership location)
7705 km
2022
new
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Bdb3dqve Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor thr...
Optimum DH24FT
more images
1
Call
Erwitte , Germany Germany
(dealership location)
7720 km
2021
used
Dimensions LxWxH: 715x455x1720 mm Jxg2ua Number of tools: 1 drive power: 850 watts Net weight: 146 kg Spindle speed: 120-3000 tool holder: MK2 / MK3 Column drilling machines OPTIdrill DH24FT / DH28FT / DH28FS TECHNICAL SPECIFICATIONS Table sizes 280 x 300 - 340 x 358 mm Drilling capacity in steel 24 - 28 mm Tool holder MT2 - MT3 Spindle speeds max. 3000 rpm Weight 92/132/146 kg
ECKER & SCHMIDT ES 23/2V ECKER & SCHMIDT ES 23/2V ECKER & SCHMIDT ES 23/2V ECKER & SCHMIDT ES 23/2V ECKER & SCHMIDT ES 23/2V
more images
5
Call
Eislingen, Germany Germany
(dealership location)
7987 km
1955
used
bore capacity in steel (diameter):23 mm throat:330 mm bore stroke:120 mm Mey8l turning speeds:180 - 1600 U/min surface area:760 x 360 mm workpiece height max.:750 mm voltage:380 V total power requirement:2 x 0,9 kW weight of the machine ca.:0,7 t dimensions of the machine ca.:1,10 x 1,15 x 2,10 m taper MK:2 x MK 1 column diameter:2 x 130 mm
MAXION UNIMAX 3
more images
1
Call
Gamp Austria
8258 km
2021
new
Column drilling machine model UNIMAX 3 Powerful, precise pillar drilling machine with a large range. Drilling table adjustable via gear rack and worm gear and can be swivelled around the column. Reversing switch Right/left rotation. Emergency stop button. Full motor protection. Star grip. Spindle speed infinitely variable: Range A: 80-1,440 rpm. Range B: 180-3.200 rpm. Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Tapping capacity: M20 Spindle MK3 Dvi8edj
Bernardo GB 28 S Bernardo GB 28 S
more images
2
Call
Mindelheim, Germany Germany
(dealership location)
8079 km
new
Drilling capacity max.: 28 mm Thread cutting max.: M12 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 3 Spindle speed: (12) 75 - 3200 rpm Be0oia0s throat depth: 250 mm distance spindle / table max.: 810 mm distance spindle / base plate: 1210 mm quill stroke: 130 mm column diameter: 100 mm working surface base plate: 325 x 330 mm table size / T-slot size: 375 x 375 mm / 14 mm Motor output power S1 100%: 0,85 / 1,1 kW (400 V) Motor input power S 6 40%: 1,1 / 1,5 KW (400 V) Machine dimensions (W x D...
FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3 FLOTT SB M 3
more images
12
Call
Reichenbach am Heuberg Germany
7973 km
1987
good (used)
1 x pillar drilling machine Fleet SB M3 Year of construction : 1987 with pneumatically adjustable feed with depth stop. + coolant device Technical data: Drill diameter max. 30 mm spindle mount: MK 3 spindle speed: 160 - 1,600 rpm table surface: 400 x 325 mm Bmi8svns Accessories: 1 x drill chuck 2 - 16 mm 1 x drill chuck key 1 x vice 1 x driving wedge The machine can be inspected under power at any time.
FLOTT SB 23 plus R1
more images
1
Call
Lüdenscheid Germany
7705 km
2022
new
- Infinitely variable speed control - Quick adjustable drilling depth stop - Thread cutting device - Undervoltage release Bexvzw39f0 - Table height adjustment via toothed rack - LED illumination in head - Continuous/normal drilling capacity R1: 23/25 mm - Tapping capacity (depending on pitch) R1: max. M 16x1 - Spindle MK II - Drilling depth 100 mm - throat depth 260 mm - column diameter 110 mm - Usable table area (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed displ...
ALZMETALL  AB 3 ES
more images
1
Call
Staufenberg Germany
7810 km
good (used)
Column drilling machine make ALZMETALL type AB 3 ES Machine # 81978 technical data: Drilling capacity 28 mm spindle admission MK 3 throat 293 mm column diameter 115 mm table size 400 x 300 mm B2h2ok9nsf stepless spindle speed 65 - 1750 rpm. spindle stroke 160 mm drive power 0,9 / 1,3 kW external dimensions approx. 500 x 900 x 2200 mm weight approx. 330 kg with - infinitely variable spindle speeds used
BIMAK 25 BIMAK 25 BIMAK 25 BIMAK 25 BIMAK 25 BIMAK 25 BIMAK 25
more images
7
Call
Iserlohn Germany
7695 km
1986
good (used)
Column boring machine Fabr.BIMAK Typ:25 Bj.1986 Drilling power in steel: 25mm Spindle intake: MK3 Spindle speeds: 135-1900U/min engine KW 0.75 Pino-dub: 110mm With 3 levels of combined Tense-up table: 300mmX300mm rotary bar and swivel bar Screw back-to-width 95mm wingspan 85mm Verstell etc swivel bar Prism up to 30mm swivel. With fast drilling feed, exit wedge, NOT-AUS mushroom pressure button, lamp, Vsqkdi Machines Spindel LRuns Very Quiet. Dimensions: Length 830mm width 580mm height 1710mm...
WEBO Gradua 23 WEBO Gradua 23 WEBO Gradua 23 WEBO Gradua 23 WEBO Gradua 23
more images
5
Call
Eislingen, Germany Germany
(dealership location)
7987 km
used
bore capacity in steel (diameter):30 mm throat:330 mm bore stroke:135 mm voltage:380 V taper MK:3 Speed:90 - 2000 U/min. feed:0,1 - 0,3 m/min workpiece height max.:600 mm surface area:450 x 350 mm transmission ratio:2 distance spindle nose and table:30 - 600 mm column diameter:200 mm Y7mcslory coolant:vorhanden weight:0,8 t total power requirement:1,1 kW dimensions of the machine ca.:0,70 x 1,05 x 2,2 m
ALZMETALL AB3/ESV ALZMETALL AB3/ESV ALZMETALL AB3/ESV ALZMETALL AB3/ESV
more images
4
Call
Rödermark Germany
7854 km
1970
good (used)
QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle Bpfmhori - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9...
Alzmetall Alzstar 23/S NEU Alzmetall Alzstar 23/S NEU Alzmetall Alzstar 23/S NEU Alzmetall Alzstar 23/S NEU Alzmetall Alzstar 23/S NEU Alzmetall Alzstar 23/S NEU Alzmetall Alzstar 23/S NEU
more images
7
Call
Offenburg, Germany Germany
(dealership location)
7893 km
new
ALZMETALL column drilling machine Alzstar 23 SHersteller: AlzmetallTyp: Alzstar 23 SZustand: NEUBohrvermögen Steel E335 (St 60) 23 mmThread cuttingSteel E335 (St 60) M 14Casting EN-GJL-200 (GG20) M 16Short spindle MK 2Spindle stroke 100 mm Projection 250 mmPillar diameter 90 mmMachine table, usable support 370 x 300 mmT-slots, number x width x distance 2 x 14 x 160 mmDistance spindle table min./Max. 140/670 mm Feed rate Manual machine height without options approx. 1770 mmNet weight approx. 175 ...
FLOTT SB 30 MV Plus
more images
1
Call
Lüdenscheid Germany
7707 km
2022
new
Standard equipment - Thread cutting device - Control panel with OLED display - robust, high quality drill head hood - LED lighting - quickly adjustable and ergonomic drill depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-lef...
ALZMETALL AB 3 HST mit Revolverbohrkopf ALZMETALL AB 3 HST mit Revolverbohrkopf ALZMETALL AB 3 HST mit Revolverbohrkopf ALZMETALL AB 3 HST mit Revolverbohrkopf ALZMETALL AB 3 HST mit Revolverbohrkopf ALZMETALL AB 3 HST mit Revolverbohrkopf
more images
6
Call
Kassel Germany
7801 km
1984
excellent (used)
Box column drilling machine make ALZMETALL type AB 3 HST machine. # 1752 Year of construction 1984 technical data: drilling capacity in steel St 60 28 mm drilling capacity in steel St 60 40 mm Drilling capacity in cast iron GG 20 35 mm Thread cutting steel St 60 M 22 Thread cutting in cast iron GG 20 M 33 Spindle mounting MK 3 Spindle speed stepless 130 - 1750 rpm. Throat 330 mm spindle stroke 160 mm table size 600 x 460 mm 3 aut. feeds 0,1 / 0,2 / 0,3 mm/rev. drive power 1,0 / 1,6 kW weight app...
IXION BS 23 AV IXION BS 23 AV IXION BS 23 AV IXION BS 23 AV
more images
4
Call
Tönisvorst Germany
7631 km
excellent (used)
Column drilling machine Make Ixion Bt7h80fzth type BS 23 AV MK 3 throat 260 mm table size 500 x 360 mm 10 speeds from 120 - 2160 rpm. automatic feed : 0,1 - 0,16 - 0,25 mm/per revolution space requirement : height 1800 mm width 770 mm depth 500 mm
more images
Call
Wiesbaden, Germany Germany
(dealership location)
7810 km
1956
used
drilling capacity steel/GG: 23 mm Naxbkfeu9 spindle taper: 2 MK arm length: 300 mm table size: 300 x 300 mm spindle sleeve stroke: 100 mm spindle turning speed range: 190 - 1500 rpm engine: 380 V, 0,5/0,75 kW space needed: 410 x 670 x 1950 mm weight: 180 kg
Bernardo GHD 28 SV Bernardo GHD 28 SV Bernardo GHD 28 SV Bernardo GHD 28 SV Bernardo GHD 28 SV Bernardo GHD 28 SV
more images
6
Call
Mudersbach Germany
7748 km
new
Bernardo column drilling machine GHD 28 SV Technical specifications Drilling capacity of Max 28 mm Thread cutting max. M12 Keyless drill Chuck 1-16 mm / B-16 Dome MK 3 Spindle speed (8) 75-3010 RPM Throat depth 320 mm Distance from spindle / table max 810 mm Distance from spindle / base plate 1230 mm Quill stroke 150 mm Nvpyiy09 Column diameter 105 mm Work surface of bottom plate 325 x 360 mm Table size / T - slot size 500 x 350 mm / 14 mm S1 motor power output 100% 0,90 / 1,2 kW (400 V) Motor p...
MAXION UNIMAX 2S TAP MAXION UNIMAX 2S TAP MAXION UNIMAX 2S TAP
more images
3
Call
Feucht, Germany Germany
(dealership location)
8032 km
new
Column drilling machine Make: MAXION Model: UNIMAX 2 S TAP Condition: New machine Spindle speed (infinitely variable): Drilling: Range A 100 - 2,000 rpm. Range B 200 - 4.000 rpm. Threading: Range A 100 - 500 rpm Range B 200 - 1,000 rpm Normal drilling capacity: 20 mm standard equipped with: - thread cutting device - digital speed display Yb82ynx0k - digital drilling depth display - table adjustment via toothed rack - LED machine light - instruction manual
Serrmac V 22 E Serrmac V 22 E Serrmac V 22 E Serrmac V 22 E Serrmac V 22 E
more images
5
Call
Concordia Sagittaria Italy
8373 km
2021
new
Column drill SERRMAC V 22 E New " CE " Electronic speed variator supplied Turntable + vice mm 350 X 250 Drilling capacity on steel R50 mm ø 22 Biguro3tye Tapping capacity on steel R50 mm M 14 CM2 spindle cone Spindle stroke mm 90 Spindle sleeve diameter mm 52 Column diameter mm 98 Spindle centre column distance mm 201 PU transmission - Electronic variator (E) Spindle speed rpm 270 ÷ 4.200 Motor power kW 0.75 / 220 V Single-phase Dimensions (h x w x d) mm 1650x850x500 Weight Kg 170 Column drill, ...
ALZMETALL AB 25 SV ALZMETALL AB 25 SV
more images
2
Call
Staufenberg Germany
7810 km
1976
good (used)
pillar drilling machine make ALZMETALL type AB 25 SV Machine # 1717 Year of construction 1976 technical data: Drilling capacity in ST 60 28 mm drilling capacity in GG 20 30 mm Drilling capacity in ST 60 35 mm Spindle mount MK 3 throat 293 mm column diameter 115 mm table size 500 x 400 mm clamping surface 400 x 300 mm infinitely variable spindle speeds 130 - 480 / 480 - 1750 rpm. spindle stroke 160 mm automatic feed 0,14 mm/rev. drive power 2,2 kW machine height approx. 1860 mm weight approx. 320...
Rogi WDM28 Rogi WDM28 Rogi WDM28 Rogi WDM28 Rogi WDM28 Rogi WDM28
more images
6
Call
Mierlo Netherlands
7575 km
new
Drilling capacity cast iron / steel ----- 28 / 25 mm Tapping capacity cast iron / steel ----- 22 / 18 mm Motor ----- 1.1 kW Speed range ----- 75 ~ 3200 r/min Spindle stroke ----- 130 mm Spindle mounting ----- MK3 Drilling table ----- 380 x 380 mm Foot ----- 535 x 360 mm Maximum distance spindle - table ----- 825 mm Maximum distance spindle - foot ----- 1220 mm Weight ----- 210 KG INCLUDED * LED worklight * Tapping function * 2-speed motor 75-3200 r/min * CE plug * Various tooling Dmk2yt2
more images
Call
Wiesbaden Germany
7810 km
ready for operation (used)
drilling capacity steel/GG: 28/30 mm spindle taper: 3 MK arm length: 300 mm R2nmr9ql table size: 350 x 400 mm spindle sleeve stroke: 120 mm spindle turning speed range: 90 - 1450 rpm engine: 380 V, 1,2 kW space needed: 650 x 400 x 2050 mm
UWM 25 Professioneel UWM 25 Professioneel UWM 25 Professioneel
more images
3
Call
Enschede Netherlands
7601 km
2020
new
YOURM COLUMN DRILL Brn03cfcyy TYPE 25 Professional - MK3 - 160/3000 rpm - Table 355 x 355 mm - Table is rotatable - Emergency stop - Protective cover - Lighting - Documentations - 230V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE
 

Used Pillar drilling machines 20-29mm bore capacity

Search Werktuigen now with more than 200,000 used machines:
FEEDBACK
Successful: Task carried out
Error: Task could not be carried out