Used Boring mill tables for sale (32)

Condition: used, table diameter 5600 mm table load 150 t x-travel / mm total power requirement 88 kW weight of the machine ca. 55 t Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: closed since 1980 Machine Type:C.T.F Diameter core face plate: 3000 mm Diameter ring faceplate: 5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.: 55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: 88 KW milling operation B3Myfxm03B Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 KW

Condition: good (used), Work table with slots Inner table dimensions: 1600x650mm Total table dimensions: 1820x770mm Working height: 870mm Grip on the bottom for liquids or cutting fluids Dqvluh Approximate weight: 850kg *Table with slots from a milling machine

Condition: used, Year of construction: 2012, table load: 60,000 kg, table width: 2,500 mm, table length: 2,500 mm, NC turntable and sliding table with tilt function. Table size 2500 x 2500 mm. Table load max. 60000 kg (60t). Table rotation axis 360°/0.001°. Table travel V 2500 mm. Table tilt function continuously adjustable 0 ~ 10°. Dpmclj

Condition: excellent (used), Year of construction: 1989, machine/vehicle number: Ob 23924, A well-preserved rotating drilling table Fab.SKODA Type:E25 Machine No:Ob 23924 Year:1989 Clamping surface:2000x2000mm Groove width:28/51mm Load capacity:up to 25t Weight:approx.7500 kg Piwng9Jdm

Condition: new, Year of construction: 2024, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics SPINDLE AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data Bkmo80Zncwx MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL M16 COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Optional equipment cooling system

Condition: used, Functionality: fully functional, The Zanrosso Fox 115 is a reliable and versatile cylinder boring machine designed for precision machining of engine blocks. Manufactured in Italy, it boasts high durability and performance, ideal for automotive and industrial applications. This used machine is located in the Netherlands, featuring advanced controls for accurate operations. Its compact design, combined with excellent machining capabilities, makes it suitable for professionals requiring consistent and efficient boring. Perfect for workshops aiming to enhance productivity and deliver high-quality results. Technical specifications: Manufacturer: Zanrosso Dqrzvb Model: Fox 115 Condition: Used Made in: Italy Availability: Immediately ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACH advises verifying specifications or else.

Condition: used, Year of construction: 1988, table length 2000 mm table width 1800 mm table load 12,5 t table adjustment - longitudinal 1.250 mm table rotating 360 Grad table positioning 4 x 90 ° feeds - longitudinal 0,63 - 2.000 mm/min total power requirement 4 kW Bdxg0Y8Wt weight of the machine ca. 7,6 t

Condition: good (used), Spotlight drilling machine Drilling device Dqo2G2 For drilling lighting holes, cable apertures, spotlight holes in wall cabinets, display cabinets and carcasses Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 1980, Condition: used, table length 550 mm table width 550 mm table swivelabel +/- 90 ° Bu0K0Rjlsw no. of flutes 4 weight of the machine ca. 600 kg

Condition: used, Year of construction: 1982, Technical details: Cqhhtpbc9Q table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: new, Year of construction: 2024, The CORMAK WS32C table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. It has 8 ROTATION SPEEDS with a speed range of: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32C bench drill: High spindle stiffness Threading by automatic switching of left-hand rotation IT HAS 8 ROTATION SPEEDS ROTATION SPEED RANGE: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical parameters of the WS32C metal bench drill MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE 745mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 140, 250, 380, 500, 580, 850, 1250, 1960 rpm NUMBER OF ROTATIONAL SPEEDS Njchf0Ae 8 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm

Condition: used, Year of construction: 1980, table load: 60,000 kg, table width: 3,500 mm, travel distance X-axis: 2,500 mm, table length: 3,500 mm, PEGARD - TRT 3500 x 3500 / 60 MACH-ID 8879 Manufacturer: PEGARD Type: TRT 3500 x 3500 / 60 Brps3Lbnhfo Control system: Siemens 840 C Year of construction: 1980 Hydrostatic table Heidenhain ROD encoder for rotation Controlled using Siemens 840C CNC Specifications Metric US Standard Table length 3500 mm Table width 3500 mm Table load 60000 V-axis feed 2500 mm B-axis rotation 720 ° Dimensions (estimate) length 6000 mm width 3500 mm height 1400 mm weight 42000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Buomxmzd Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: good (used), Table: 2500 x 2000 mm Max. load: 25 tons. Travel: 2000 mm. Cx03Hv9X

Condition: new, Year of construction: 2024, The CORMAK WS32 table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32 bench drill: High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE Dns7Hd 745mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 280, 400, 675, 1140, 1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm Optional equipment cooling system

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight Gxca2Je 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° weight of the machine ca.: ca. 70 t rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis Bmcfvggj - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Condition: new, Year of construction: 2024, The WS16 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 16mm MAX. THREADING DIAMETER IN STEEL M10 COLUMN DIAMETER 70mm SPINDLE TRAVEL 100mm SPINDLE-COLUMN DISTANCE 193mm MAX. SPINDLE-TABLE DISTANCE 330mm MAX. SPINDLE-BASE DISTANCE 613mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 480-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 265 x 285 mm BASE DIMENSIONS 360 x 480 mm MACHINE HEIGHT 1130mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 131.5 kg DIMENSIONS 600 x 400 x 1150 mm Optional equipment cooling system Isua273

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° Bkgskbfv feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: new, Year of construction: 2024, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL M16 COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER Bkmo799Dioo 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Optional equipment cooling system

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m Bik883Fb The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: new, Year of construction: 2024, The CORMAK WS32 table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32 bench drill: SPINDLE AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE 745mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 280, 400, 675, 1140, 1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT Ngi0Fcpg 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm Optional equipment cooling system

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. Bgpltxen - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: new, Year of construction: 2024, The W16 table drill is characterized by a rigid structure and great performance while maintaining small size. It has threading functions and a swivel work table with adjustable height. It is a machine that combines power and precision, which is important in various applications. Machine description Threading function Automatic change of the direction of spindle rotation during threading Manual change of direction of rotation using a foot lever High spindle stiffness Setting the required drilling/tapping depth The drive is transmitted via a belt transmission Height-adjustable work table, tiltable from -45° (left) - +45° (right), with the ability to rotate 360° on the column The base is equipped with 14 mm wide T-slots The belt transmission cover is equipped with a safety limit switch No vice included! Technical parameters Max. drilling diameter 16 mm Max. spindle quill extension 100 mm MK2 spindle cone Spindle speeds 480, 800, 1400, 2440, 4100 rpm The distance of the spindle axis from the column is 193 mm Table dimensions 200x230 mm Base dimensions 528x360 mm Myjzbm0Q Max. distance of the spindle tip to the table 315 mm Max. distance of spindle tip to base 556 mm Table rotation range in the horizontal axis ±45° Table rotation range around the column is 360° Motor power 750 W / 400V Weight 90 kg Included: B18 self-clamping drill chuck MK2 drill chuck shank

Condition: new, Year of construction: 2024, The CORMAK WS32BC table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. It has 8 ROTATION SPEEDS with a speed range of: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32BC bench drill: SPINDLE AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation IT HAS 8 ROTATION SPEEDS ROTATION SPEED RANGE: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical parameters of the WS32C metal bench drill MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE Bvmdymin 745mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 140, 250, 380, 500, 580, 850, 1250, 1960 rpm NUMBER OF ROTATIONAL SPEEDS 8 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm