Used Drilling centers for sale (14)

Condition: excellent (used), ALZMETALL ALZFFLOW 30/S Stepless spindle speed: 225-4300 rpm Table dimensions in mm : 515x360 Flow drilling capacity steel St12.03 :12mm Short spindle : MK 3 Weight : 260 kg Spindle stroke : 140mm Year of construction: 2003 Operating instructions are also included with the machine. Cccpxvo The machine can be inspected and tested by appointment.

Condition: new, Year of construction: 2024, Travel distance Y-axis: 600 mm, Travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide Bj3F7I0Swea - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Condition: ready for operation (used), Functionality: fully functional, The CNC drilling center from Weyrach with Siemens Sinumerik 805 control is for sale. The machine was in working order until it was dismantled. Calibration is required for the control system. Weight approx. 5 - 6 tons Machine dimensions: approx. 6500 x 1400 x 2500 mm D7V0Be0

Condition: used, Year of construction: 2008, bore capacity in steel (diameter):100 mm max. pitch circle:7000 mm number of spindles:2 bore spindle turning speed range:1 - 3000 U/min high speed spindle taper ISO:50 bore slide stroke:900 mm feed speeds:1 - 6000 mm/min max. workpiece weight:18000 kg total power requirement:125 kW dimensions of the machine ca.:13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device Fzikgak

Condition: used, TECHNICAL DETAILS * Spindle speeds : 200-20000 [rpm] * Travel : 38 [mm] - Distance table/spindle axis : 89 [mm] Dpryjz - Table dimensions : 182 x 300 [mm] - Machine height : 342 [mm] EQUIPMENT - Collets set

Condition: used, Year of construction: 1974, Drilling machine, horizontal boring machine&nbsp Model: Conventional Manufacturer:&nbsp WMW Union Type:&nbsp BFT 90/2 Including rotating table Including Heidenhain&nbsp digital readout Including multiple belongings Dpgncb X-travel (length:&nbsp 1000mm Z-travel (cross): 1600mm Y-travel (up-down): 1050mm W-travel: 710mm Table: 1400x1250mm Spindlemotor: 12kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Spindle-take: ISO50 Machine-weight: 10500kg

Condition: used, Drilling machine Rqpbv8Vca

Condition: used, Year of construction: 1979, Operating hours: 8,086 h, Functionality: fully functional, TECHNICAL DETAILS Control: Heidenhain TNC 426 PB Traverse paths Travel X: 1250 mm Travel Y: 630 mm Travel Z: 560 mm Drive power: 44 kW Fixed table: 1200 x 710 Spindle: ISO 50 Speed range: 30-3000 min-1 Max. torque: 522 Nm Bl93Wkxqsnv feeds: 3-2000 mm, rapid traverse 10 m/min max. distance spindle nose - table surface: 725 mm projection spindle center - column: 800 mm MACHINE DETAILS Space requirement: approx. 5 x 5 m Weight: approx. 12 tons EQUIPMENT Additional table top: height 200 mm 36-fold tool changer, coolant device. The additional / magnetic clamping table shown is not included in the scope of delivery! The machine was overhauled and modernized in 2000 with digital drives and Heidenhain control

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Robust and torsion-free steel construction, solid German engineering Simple operation, no CNC knowledge required Automatic tool change thanks to Laip quick-change system TECHNICAL DETAILS Drilling head vertically above the table: travel, horizontal approx. 600 mm Drill head vertical above the table: travel distance, vertical approx. 600 mm Horizontal drilling head, right and left side: travel distance, horizontal approx. 320 mm Horizontal drilling head, right and left side: Travel distance, vertical approx. 450 mm Positioning accuracy of the drill heads: 0.05 - 0.1 mm Drive power of the drill heads: 2.2 kW Drilling capacity in standard steel: approx. 25 mm Infinitely variable speed adjustment with frequency converter: 140 - 2,000 rpm MACHINE DETAILS D7Tl2Zc Total length: approx. 12,000 mm Total width: approx. 2,450 mm Total height: approx. 2,500 mm Weight of the machine: approx. 5,000 kg EQUIPMENT One drilling head vertically above the table and one drilling head horizontally on the left-hand side The drilling heads are positioned vertically and horizontally via servomotors with ball screws Each drill head is equipped with a separate spraying device.

Year of construction: 2011, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS Travel X / Y / Z: 7,000 / 700 / 600 mm Control: Sinumerik Spindle speed: 1,200 rpm (infinitely variable) Tool holder: SK40 with 22 places Bed size: 9,200 x 500 mm MACHINE DETAILS Compressed air connection: 6 bar Voltage: 380 V, 50 Hz Bj777Koxdnk Weight: 13.0 t Dimensions (L x W x H): 13.3 x 3.2 x 2.5 m EQUIPMENT - Cooling water pump with feed - Machine vices (2 pieces) - Clamping plate - Enclosure with sliding door - 3D probe - Various clamping devices and aids

Condition: used, TECHNICAL DETAILS Cysljfbnbu - dimensions : 1350 x 1050 x 850 [mm] - weight : 145 [kg]

Year of construction: 1995, Condition: excellent (used), Functionality: fully functional, Kaltenbach plant consists of sawing line HDM 1430 and drilling line WBX 1215 TECHNICAL DETAILS drilling diameter: 8 - 40 mm Marking unit: hydraulic punch saw blade holder: 100 x 4 x 30 x 250 mm Saw blade type: HSS segment saw blade saw blade diameter: 1430 mm Cutting width: 9,5 mm working range 90° angle steel: 250 mm working range 90° U-steel: 400 mm working range 90° double T-beam: 600 mm Working range 90° wide flange beam: 1008 x 302 mm Working range 90° special wide flange beams and welded I-beams: 1000 x 450 mm bevel cut beams IPBv 75°: 1008 x 302 mm bevel cut beams IPBv 60°: 910 x 302 mm bevel cut beams IPBv 45°: 716 x 304 mm bevel cut beams IPBv 40°: 716 x 304 mm bevel cut beams IPBv 35°: 478 x 307 mm bevel cut beams IPBs 75°: 1008 x 402 mm bevel cut beams IPBs 45°: 524 x 357 mm bevel cut beams IPE 45°: 3600x 220 mm cutting speed: 10 - 20 m/min saw feed speed: 0 - 400 mm/min rapid return: 2000 mm/min working height: 640 mm roller conveyor infeed: approx. 17,50 m cross conveyor infeed: approx. 3,50 m roller conveyor discharge: approx. 17,50 m Cross conveyor discharge: approx. 3.50 m MACHINE DETAILS weight: approx. 11 t dimensions: 4500 x1600 x 3200 mm power saw motor: 13,5 / 17,5 kW power hydraulics: 3,0 kW power vertical vice: 1,5 kW power hydraulic oil heating: 3,0 kW Tlw2Asdo Provision is disassembled but unpacked!

Condition: repair required (used), Control defective (goes on fault) weight ca 2-3t dimensions lbh 1800x1400x2500 table ca 1200x1100 0Oysfbm Exclusively for pickup

Year of construction: 2000, Condition: good (used), Weight: 4600 kg Fdb3Pgoyk Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.