Used Tos Sn63C for sale (681)

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Iedpfezff A Eex Adroic Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2968 Iiodpozdiv Ajfx Adrjc Make: TOS Type: SN / SIU Max. Diameter 250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2969 Make: TOS Type: SN / SIU Year: 90 Max. Diameter 150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Iijdezdiuxspfx Adroc

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth, outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller Iisdpfezfiwysx Adroc - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - 4-knife cutter heads fitted, height 120mm - spindles adjustable up/down, right/left - stepless feed rate adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES - ideal for processing flooring - electric table lifting - Czech production - used planer, very good condition Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7903 Technical data: - track width: 450mm - shaft width: 420mm - installed saw blade: 400mm - max saw blade diameter: 450mm - saw blade bore diameter: 80mm - max cutting height with 450mm blade: 160mm - table dimensions: 2230x860mm – from above: - kickbacks/stoppers - sliding shaft - kickbacks - smooth sliding roller - hold-down - shaft with saws - hold-down - 2 sliding, hold-down shafts – from below: - roller in front of the table - guide - stoppers - track Isdpfxey S Ah Us Adrjic - central track lubrication - manual lifting of saw shaft - electric body lifting: 0.75kW - stepless feed speed adjustment - extraction port diameter: 280mm - main motor: 75kW - overall dimensions (L/W/H): 2360x200x1960mm - weight: 3250kg ADVANTAGES – Czech production – used multi-blade saw – upper control panel – DTR (technical documentation) – very good condition Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of larger currency fluctuations, the price may change)

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,220 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. • Control system: NCT-104 Spindle • Spindle diameter: 130 mm • Taper: ISO 50 (7:24) • Spindle speed range: 10 – 1500 rpm • Max spindle torque: approx. 2350 Nm • Main motor power: 37 kW Axis Travels • X-axis travel: 3500 mm • Y-axis travel: 2000 mm • Z-axis travel: 1220 mm • W-axis (spindle quill travel): 570 mm Table • Rotary table size: 1600 x 1800 mm • Max workpiece weight: 12,000 kg • T-slots: 22 x 9 x 160 mm • B-axis table feed: 0.03 – 1.5 rpm Feed Rates • Rapid traverse (X / Y / Z / W): 2000 mm/min Iedpjx Imtaefx Adroic Power • Total power requirement: approx. 80 – 83 kVA

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 Isdpfx Aownhf Rjdreic - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. Ijdpfozc D E Isx Adreic - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 1987, Ref. -No.: 10635 Manufacturer: TOS HOSTIVAR Type: BHU 32 Year of construction: 1987 Max. Grinding length: 630 mm Iisdpfx Aozc D Ezedrec Grinding Diameter: 320 mm

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm Iodpfew Nmw Hsx Adrjic W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: excellent (used), functionality: fully functional, Table mm 300 x 600 Iiodpfjzcmyhox Adrec Axes mm 450 x 300 x 350 taper in spindle ISO 40 spindle revolutions rpm 50 - 2500 Machine dimensions: mm 1485 x 1475 x 1680 mm Machine weight kg 1350

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH Iodjq H Ap Nepfx Adroic

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! With digital display of travel distances! TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Isdpfx Adjzaqxcsroic Spindle diameter: 75 mm Spindle speeds: 18-1,800 rpm Spindle taper: SK-40 Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg EQUIPMENT Accessories shown in the pictures, including tools, tool cabinets, and clamping devices.

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm Iodpfx Aoza Edaedreic - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: good (used), turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA Iijdsy Hxq Uspfx Adroc spindle bore 60 mm weight of the machine ca. 2800 kg dimensions of the machine ca. 2900 x 1200 x 1700 mm

Condition: ready for operation (used), Tool milling machine, TOS - INTOS FNGJ 40, with 3-axis Heidenhain digital display -Travel distances X/Y/Z: 600x400x400mm -Automatic feed rates / rapid traverse rates in all three axes -Spindle speeds: 63 - 3150 rpm -Tool holder: ISO 40 -Hydraulic tool clamp -Swivel table: 800x400mm -Vertical and horizontal milling capability -Swiveling vertical head with quill Iiodpfozdb Iisx Adrjc -Coolant system -Tool cart / tool holders / milling cutters -Counter bearing / horizontal milling spindle -Tool holder clamping fixture -Machine feet -Documentation Dimensions: L x W x H 2.5 x 2 x 2.3 meters / Weight: 2650 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1990, CNC milling machine Fab.TOS type: FGS40CNC Control Haidenhein TNC 355 BJ. 1990 Iedpfedtfhqex Adrjic Procedures: X1000mm Y500mm Z500mm Spindle retainer: ISO 50.

Condition: excellent (used), CATALOGUE NUMBER 7653 Technical data: - track width 240mm - shaft width 260mm - max. disc diameter 300mm - disc bore diameter 70mm - max. cutting height 100mm - table width with clearance 750mm - table length 1530mm - from above: - pawls/deflectors Iisdpfxjzadfpo Adroc - toothed feed shaft - pawls/deflectors - saw shaft - sliding/pressure roller - from below: - guide - pawls/deflectors - track - feed motor 2.4kW - main motor 22kW - dust extraction port diameter 2x160mm - overall dimensions (L/W/H) 2000x1530x1720mm - weight approximately 2080kg Net price: 23900 PLN Net price: 5690 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm Iisdpfjzab Egjx Adroc blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication Iisdpfx Aozab Dijdrjc - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - track width: 360 mm - shaft width: 350 mm - max. saw blade diameter: 350 mm - blade hole diameter: 80 mm - max. cutting height: 120 mm from above: - pawls - toothed feed shaft - pawls - smooth sliding shaft - shaft with saw blades - pressure sliding shaft from below: - 2 sliding rollers in front of the table - guide Iijdpfx Aozabwiedroc - pawls - track - central track lubrication - electric lifting of the saw blade shaft - electric body lifting - stepless feed speed control - feed motor approx. 2.5 kW - main motor 30 kW - overall dimensions L/W/H 2500x2300x1900 mm - weight approx. 4000 kg ADVANTAGES – Czech manufacture – 2 sliding rollers in the table – used multi-blade saw – very good condition Net price: 31,900 PLN Net price: 7,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate changes, the price may be adjusted)

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Iisdpfx Asy T E Itsdrsc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), CATALOG NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Iisdpfey Uxr Ijx Adrsc Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm Iiodpsu Nkm Eofx Adrec *

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad Iodpfsu Nlg Tsx Adrsic dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *