Used Radial drilling machines 1300-1999mm arm length for sale (65)

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Uducl2Xbyv Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: used, Year of construction: 1971, centre height 800 mm centre distance 1350 mm fabric-no. 10/6041 Ufqrvc9Bcb Cube 750 mm x 600 mm

Condition: used, bore capacity in steel (diameter) 55,0 mm arm length 1750 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm Fzjckpc feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Hu3N0Ks

Condition: new, Figure shows RDM 1250. Radial drilling machine with hydraulic clamping and tapping device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping capacity steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 320 mm projection (min/max): 330 - 1650 mm travel of the spindle head (horizontal): 1320 mm distance spindle nose - base plate (min/max): 465 - 1405 mm Traversing height of the cantilever: 670 mm Clamping area of cube table: 630 x 500 x 500 mm size base plate: 2550 x 970 x 200 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 37 - 1253 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device Ezwzlultp - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: used, Year of construction: 1960, bore capacity in steel (diameter) 40/70 mm arm length 805/1345 mm workpiece height max. 1640 mm total power requirement 6,37 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Dprtdr

Condition: used, Year of construction: 1998, bore capacity in steel (diameter) 55 mm arm length 1605 mm workpiece height max. 1500 mm table-size 1500 x 800 mm spindle taper MT 5 spindle turning speed range 30-1200 U/min feed range 0,06 - 1,0 mm/U crossrail adjustment horizontal 495 - 1.605 mm crossrail adjustment vertical 505 - 1670 mm spindle stroke 310 mm column diameter 360 mm distance spindle/base plate 825 - 1670 mm distance spindle /table 275 - 1120 mm power requirement 4,4 kW voltage 400 V Cxlaenll2E total power requirement 7,2 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 2,50 x 0,80 x 2,80 m - Serial-No.: 207-98 - Pole-changing motor with 2 speeds - right / left rotation - machine light - Cube table dimensions 1,010 x 750 x 510 mm high

Condition: ready for operation (used), Year of construction: 1985, Drilling capacity: 55 mm, 1600MM arm 55MM drilling capacity Gojsms hydraulic locking

Condition: like new (used), Year of construction: 2018, Operating hours: 1,500 h, Functionality: fully functional, Machine/vehicle number: ZB 10 753, Little-used machine FEATURES: Spindle taper MT 5 Maximum drilling radius (mm) 1600 Cqtnauatq Minimum drilling radius (mm) 350 Spindle stroke (mm) 315 Min. sub-spindle height (mm) 350 Max. sub-spindle height (mm) 1250 Cast-iron drilling capacity (mm) 70 Steel drilling capacity (mm) 60 Steel tapping capacity M46 M52 tapping capacity Spindle speeds (rpm) 38-2000 Number of automatic feeds 8 Spindle motor (kW) 4 EQUIPMENT: ■ Hydraulic clamping ■ Manual or automatic lowering ■ Speed display ■ Tapping function ■ Variable speed drive ■ Lighting ■ Case hardening ■ Centralized lubrication ■ Sprinkler pump; Supplied with drilling block ( Dice). Price excl. VAT, intracommunity invoicing possible. Truck loading included/delivery not included.

Condition: new, Year of construction: 2024, Functionality: fully functional, Spindle speed (max.): 2,000 rpm, Spindle speed (min.): 25 rpm, Overall weight: 3,500 kg, Column diameter: 350 mm, Warranty duration: 12 months, MACHINE READY FOR IMMEDIATE PICKUP!!! EUROMET WP50x1600 radial drilling machine is used in factories, workshops and production lines in large factories. It is designed to perform the following operations: drilling reaming drilling rough reaming threading boring (option) In addition, various types of accessories can be mounted on the machine to expand the functionality and range of machining. The main features of the machine: Pc99W9Ec strong, rigid construction illumination large working surface of the table automatic spindle feed motor for raising and lowering the arm mechanical clamping of arm and headstock spindle micro-feed mechanism Standard equipment: box table automatic feed of the spindle tapping stepless headstock speed control with digital readout of spindle speed (for WP50/1600E model) lighting machine manual in English CE declaration of conformity Optional equipment (extra charge): quick release handle lubricator threading handle Technical data: Max. steel drilling diameter: 50 mm Distance from spindle axis to column: 350 - 1600 mm Horizontal travel of the headstock: 1250 mm Column diameter: 350 mm Distance from spindle tip to base working surface: 315 - 1250 mm Vertical travel of arm: 600 mm Arm rotation angle: +/- 360° Spindle taper: MT5 Speed range: 25 - 2000 rpm Number of spindle speeds: 16 Range of spindle feed values: 0.04-3.2 mm/rev Number of spindle feed values: 16 Spindle quill extension: 315 mm Main motor power: 4 kW Dimensions of the base (DxSxW): 2400 x 1000 x 200 mm Dimensions of the drilling machine (DxSxW): 2490 x 1035 x 2835 mm Weight: 3500 kg

Condition: excellent (used), Year of construction: 1997, Projection 1,600 mm Adjustment of the crossbeam 1,280 mm Spindle stroke 310 mm Spindle holder MK 5 Spindle speed ( 16 steps ) 28 - 2,500 rpm Weight 4,550 kg Rqwuyjx97X Coolant device included Including clamping cube

Condition: used, bore capacity in steel (diameter) / mm arm length / mm Dppwxl workpiece height max. / mm total power requirement / kW weight of the machine ca. / t required space / m Table dimensions: 800x800mm Height: 590mm

Condition: used, bore capacity in steel (diameter) 35 mm arm length 700 mm workpiece height max. mm spindle taper MT 3 spindle turning speed range 100 - 1220 U/min feeds 0,125 - 1,25 mm/U quill stroke mm Dpbkd9 total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,5 x 0,8 x 2,3 m including cube 480 x 400 x 430mm

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm Dpflhr workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), IVEMA RADIAL DRILL MODEL FR40 1300 HOLE CAPACITY ON STEEL 40 mm HOLE CAPACITY ON CAST IRON 50 mm OVERHEAD 1300 mm SPINDLE CONE ATTACHMENT MORSE 4 SPINDLE CUBE 550x420 Dpf78J

Condition: used, Year of construction: 1998, Machine/vehicle number: 1904, Lg.no. 23387 Technical data: - Drilling capacity in steel ST 60 approx. 50 mm - Thread cutting up to approx. M 50 - Drill spindle holder MK 5 - Drill spindle stroke 300 mm - Projection min. / max. 320 / 1600 mm - Column diameter 320 mm - Boom stroke 650 mm - min / max - distance: - Spindle - base plate approx. 600 - 1250 mm Dpl2Pj - Machined base plate Clamping surface approx. 1000 - 1700 mm - 18 spindle speeds 40 - 1800 rpm - 8 feeds 0.04 - 0.63 m/rev - Drill spindle drive 400 V / 7.5 kW - E - Hydr. central clamping - Cube table with machine vice - Coolant device - Space requirement approx. W 2400 x H 2950 x D 1050 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 1965, Radial arm drill, Radial Drilling Manufacturer:&nbsp WMW, MWF Type: BR40x1600 Capacity:&nbsp 40&nbsp mm - 55 mm Sgx3Sgaqsh Max. drilling depth: 360 mm Spindle-take: MK40 Spindle-speed: 22,4-2800 U/min Max. distance:&nbsp 1600 mm Table: 720x720mm Machine-dimensions: 2700x1000x2800mm Machine-weight: 3500kg

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 80 ( 100 ) mm turning speeds 20 - 1400 U/min spindle taper MT 6 Rechts- + Linkslauf quill stroke 400 mm feed range - spindle 0,045 - 1,5 mm/U arm length 1600 mm workpiece height max. 400 - 1800 mm base plate surface area 1170 * 2185 mm accessories: 2x Würfeltisch+Kühlmittel Bhtkcwj9Xw automatic clamping device electr. Elektro - Mechanisch total power requirement 14 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 3 x 1,5 x 3,9 m

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm Bgek7X8M9K usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: as good as new (ex-display), Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Dpjuir Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Condition: good (used), Radial drilling machine FORADIA MS 75/ 1600 R829Bjbubh

Condition: used, Max. drilling diameter in steel: 63 mm Max. distance of spindle axis to casing guide: 2000 mm Vertical adjustment of the arm: 950 mm Spindle speed: 11-2000 /min. 5.5 kW Ccbdh93Ybi Total machine weight: 6900 kg Including cooling system and drill cube - see photo.

Condition: good (used), Throat depth: 1,600 mm, Drilling capacity: 50 mm, Spindle speed (max.): 2,500 rpm, Spindle speed (min.): 28 rpm, Quill stroke: 310 mm, Spindle mount: MK 5, Power: 4 kW (5.44 HP), Armlength: 1600 mm Drillingcapacity steel: Ø 50 mm Tappingcapacity steel: M50 x 1,5 mm Spindle nose: MK 5 Spindle speeds: 28 - 2500 Rpm Spindle feed: 0,05 - 2 mm/rev. Spindle stroke: 310 mm Bofxhqojbo0 Spindle -> Floorplate: 1500 mm max Drilling table: 1000 x 750 mm Size floorplate: 1820 x 986 mm Featured with: - Cooling unit - User manuals Spindle motor: 4 kW Country of origin: Czech Republic Machine weight: 4500 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Condition: new, Drilling capacity: 60 mm, Infinitely variable spindle speed, feed gear and a wide range of sizes characterise our proven bestseller series. Our complete data sheet with all details and technical data can be found here under Documents as a PDF download. Bhaqpqdjkcr

Condition: new, Drilling capacity: 60 mm, Servo-conventional radial drilling machine with advanced functions and large touch screen. Ktatz8Phcf Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.