Used drilling and milling for sale (123)

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Gkslhccortrx Reqksa Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, Scharmann Drilling Machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Lateral (Z): 1,150 mm Spindle speed: 20 – 6,000 min⁻¹ Table size: 1,200 × 1,400 mm Table load: max. 6 t Without tools and accessories. Disassembly begins after payment is received. Collection in September. Being replaced with a new machine. Very important: • The height and weight of the asset must be taken into account when selecting the transport vehicle. • There is no loading dock on site. However, a forklift or an overhead crane is available for loading. • If collection is not carried out on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. Golhcszilmrscqkoka • The sale is made excluding any guarantee or warranty. • The information provided consists of the technical data from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Empty weight: 4.200 kg Golhccownifroqkoka - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1977, serial number 2934 weight 709 kg feed ja m/min Gkelhsztfytsccqkja taper MK 3

Condition: used, total length: 1,900 mm, total height: 2,150 mm, total width: 1,800 mm, Empty weight: 2.500 kg - Documentation available: Yes - CE certificate present: No - Transport dimensions: 1900mm x 1800mm x 2150mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gkelhccqjzrxfmokea Lukas van Rossum

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 15,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 180 rpm, total length: 15,000 mm, table width: 3,300 mm, table length: 15,000 mm, drilling capacity: 28 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 180 rpm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 12 m/min, Equipment: rotational speed infinitely variable, COLLECTIVE LISTING - 3 FICEP EXCALIBUR CNC BEAM DRILLING LINES Three refurbished CNC single-spindle beam drilling lines from the Ficep Excalibur series: two Excalibur 12 (1201 DE, year 2013) and one Excalibur 6 (601 DE, year approx. 2011). Together they form a graduated profile-processing line (up to 1,200 mm and up to 610 mm). EACH MACHINE AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT (all three lines) All three machines have been refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). === MACHINES 1 + 2: FICEP EXCALIBUR 12 / 1201 DE / YEAR 2013 === Two identical lines, serial numbers 33900 and 34062. CNC single-spindle beam drilling line based on the moving-column principle. The moving drill head with direct drive performs drilling, countersinking, tapping, milling and scribing in a single pass. - Profile cross-section: max. 1,200 x 800 mm, min. 50 x 50 mm | length up to 12 m | CE - Profile shapes: I-beams, channels, angles, flat bar, square/rectangular hollow sections - Drill head: 1, direct drive, 19 kW | 180-4,000 rpm | max. drilling diameter 28 mm - Drilling feed: ball screw, servo-driven | CNC axes: 5 - X-axis: travel 0-15,000 mm, 35 m/min | Y-axis: 12 m/min | rack and pinion - Tool changer: 6-position automatic (ATC), HSK A80 - Clamping: hydraulic double-acting | Profile detection: laser, non-contact - Coolant internal (through spindle) and external - Control: Ficep Pegaso CNC (PC/CNC/PLC integrated), remote diagnostics via network - Interfaces: DSTV, DXF, XML (Tekla) | Table: 15 m long, approx. 3,300 mm wide Gkjlhsv Iamzjccqkja Scope of delivery per line: drilling unit 19 kW | support table with guide rail 15 m | 6-position ATC (HSK A80) | Pegaso CNC | radio remote control | coolant system. === MACHINE 3: FICEP EXCALIBUR 6 / 601 DE / YEAR APPROX. 2011 === Serial number 32754. More compact line with moving drill cabin, workpiece stationary on the clamping frame. - Profile cross-section: max. 610 x 610 mm, min. 30 x 30 mm | I-beam web height up to 610 mm - Max. machining length: 12,000 mm | X-axis traverse 0-12,000 mm, rack and pinion - Profile shapes: I-beams, angles, UPN channels, flat bar, square/rectangular tube - Drilling spindle: 1, 7.5 kW | max. drilling diameter 22 mm | manual change (quick-change chuck) - Operations: drilling, countersinking, tapping (with suitable tooling) - Clamping: double-acting automatic (top/bottom), min. 30 x 30 mm - Control: Mitrol CNC (Ficep Group) Scope of delivery: beam drilling line 601 DE | Mitrol CNC | traverse frame 12,000 mm | length measuring/positioning system X-axis (configuration confirmed during inspection) | automatic clamping system | quick-change chuck. Machine weights, rated voltage and footprint per line follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Price on request - individually or as a package | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2021, Bauer Maschinenbau Bohrmax Z40, Section Drill & Milling Machine, Overall Table Length 4350mm, 4 Sections 1050mm Long, Penta NC V2 Programme Control, 10 Tool ATC, CAT 40 Spindle, 11kw Power, Travels X Axis = 4000mm, Y Axis = 580mm, Z Axis = 700mm, Drilling Capacity 3 - 40mm, Drilling Speed Range 140 - 2300rpm, Rapid Traverse X = 24m/min, Y & Z = 7.5m/min, Table Width 560mm, Underside of Tool Holder to Table 700mm, Motor 7.5kw. S/No. 21-0156 (2021) Gkelhjzr Ix Asccqkja Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Gjlhcjzp Dn Iscqkeka Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Ficep 1001 DZB CNC Drilling / Sawing Line- Year 2007. Rotating Spindle. Automatic Tool Changer. 4 way Scribing. Gripper feed. 18.3 metres infeed and 18.3 metres outfeed. Lift and Carry Infeed and Outfeed Cross Transfers. 1000mm Section Capacity. Gkolhccqszrpx Djksa

Condition: used, DIXI 450 P round table with horizontal and vertical design elements. Golozub N Tjhccqkska

Condition: good (used), Year of construction: 2000, Machine is with SK 30 20.000 rpm Gelhcceznmqisqkska Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount Gslhcjvutw Hocqkjka MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Geleg U Uv Uehccqkeka Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Gslheyvh Hqsccqkjka Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Drilling / Milling Machine KNUTH MARK SUPER SV Year of construction: 2021 Travel X: 560 mm Travel Y: 190 mm Travel Z: 400 mm Spindle: CM4 Spindle exit: 120 mm Spindle speed: from 75 to 2500 RPM Table size: 800 x 240 mm Tilting head Scale 3 axes Electronic speed variator Automatic head up/down Automatic X axe travel Manual Y axe travel Supplied with many accessories: Boring heads, clamps holders, etc (see photos) Voltage: 380 V Length: 1400 mm Depth: 1200 mm Height: 2000 mm Weight: approx 500 KG Gslhozqtc Rsccqkjka

Condition: good (used), operating hours: 200 h, functionality: fully functional, machine/vehicle number: H05107, Bench drill press Knuth SSB 50nSuper MK 4 WORK AREA Drilling capacity 50 mm Threading capacity, steel M 30 Table clamping surface 580 mm x 460 mm Quill stroke 200 mm Manual table travel 515 mm Motorized table travel 405 mm Table swivel range (max.) ± 50° Column diameter 180 mm Distance from spindle nose to table surface 575 mm Distance from spindle nose to base 1165 mm Overhang 360 mm MAIN SPINDLE Gslezqt U Hshccqkeka Speed range 50 rpm - 2000 rpm Spindle taper 4 MK FEED Quill feeds 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 mm/rev

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm Golhjynmtxsccqkeka 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Gslhcot Hxa Hscqkska Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg Gkslhccou Idtpoqkja dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system for axes X/Y/Z/B-axis hydraulics machine feet/footplates control panel with boom *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Gkelhjzkkm Hjccqkja Complete with: Automatic feed. Variable speed with delay. Tapping system via reversing gearbox. Lubrication system. Motorized rapid vertical feed for table and cross slide. Vice. Drilling in steel, diameter 40 mm. Tapping M26. CM 4 spindle connection. Spindle travel 145 mm. Cross slide table 800 x 255 mm. Variable speed with delay 64-2350 rpm. Motor 2.2 kW. Three-phase power supply 400 V. Weight 780 kg.

Condition: new, Year of construction: 2026, Milling and drilling machine of uncomplicated design warrants long-term reliability. This machine is equipped with a horizontal spindle and vertical head. XZ 6350ZB are also equipped with spindle autofeed. Machine features Equipped with vertical head and horizontal spindle ISO 40 tool mount taper Milling machine with X and Y axes feed, and rapid Z-axis setting feed Extendable vertical head spindle Mechanical feed in 3 ranges and automatic threading capability Vertical 0–90o swivel head Extendable swivel upper beam Technical data Table dimensions 1270×260 mm Longitudinal table travel 750 (700) mm Transverse table travel 270 (220) mm Vertical travel from table to column 340 mm Number of T-slots in table 5 T-slots distance 50 mm Table load capacity 200 kg Vertical head swivel 90° Spindle extendable L – 120 mm Spindle taper ISO 40 Spindle mechanical feed 0.08-0.15-0.25 mm/rotation Verical spindle speed 90–2000 rpm Horizontal spindle speed 40–1300 rpm Longitudinal feed speed range 24–402 mm/min Transverse feed speed range 24–402 mm/min Rapid feed quick adjustable for Z axis Upper ram extension 460 mm Distance from vertical spindle to column 260–740 mm Distance from vertical spindle to table 100–440 mm Distance from horizontal spindle to table 0–300 mm Digital display for 3 axes Main motor power 2.2 kW Dimensions Gjlhccovxg T Asqkoka 1520×1289×2150 mm Weight 1420 kg

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Gelsud H H Uohccqkeka Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Gelhsy E Hk Heccqkjka Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Gkslhccex Dkr Njqkja Maximum thread diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: new, Year of construction: 2026, The XZ7550ZB milling and drilling machine is the perfect tool for professionals. With a simple, uncomplicated design, this machine guarantees uninterrupted work for a long period of time. With a vertical head and horizontal spindle, the XZ7550ZB offers a wide range of machining options. The ISO 40 tool clamping cone ensures robust tool clamping, while the spindle auto-feed further increases productivity and efficiency. X- and Y-axis working feeds and fast Z-axis positioning feeds enable precise machining, while the extendable vertical head spindle facilitates access to workpieces. Mechanical feed in 3 ranges and an automatic threading option add flexibility. The vertical head swivelling from 0-90° and the upper extension and swivelling bar add extra functionality and precision. Machine description AUTOMATIC ELECTRIC FEED OF THE TABLE IN THE Y AXIS AUTOMATIC MECHANICAL FEED OF THE TABLE IN THE X AXIS AUTOMATIC SPINDLE FEED HEAVY, STABLE CAST IRON CASTING VERY PRECISELY MANUFACTURED SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES IN ALL 3 AXES QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION SWIVEL HEAD +/- 90° Technical data Max. drilling diameter 50 mm Max. horizontal milling length 100 mm Max. vertical milling diameter 25 mm Max. threading diameter M16 Max. boring diameter 120 mm Spindle taper ISO 40 50Hz spindle speed range and number (rpm) 72-1800 (8) Vertical, 60-1350 Horizontal (9) Distance between spindle and column surface 200-700 mm Distance between spindle and table 100-480 mm Distance between spindle axis and table 0-380 mm Number, width and spacing of T-slots 5 / 14 mm/44 mm Spindle travel 120 mm Table size 1000x240 mm Gkjlhoud Ic Dsccqkja Table travel 600x230 mm Feed of table 24-720 mm/min (8 speeds) Spindle feed 0.015; 0.08; 0.25 mm/rev. Motor (vertical/horizontal) 1.5 kW/1.5 kW Overall dimensions 1120x1060x2035 mm Weight 970 kg Scope of delivery Digital readout for 3 axes SINO ISO 40 Morse bushings Drill chuck B16 CE declaration of conformity Machine vice L - 160 mm Milling machine spindle with a set of collets for finger joint cutters Horizontal spindle support / ocular / Milling arbor long. Basic tools 24 V halogen lighting system Cooling system