Used Pillar drills with 30-39mm drilling capacity for sale (155)

IBERDRILL Falken AZ 32

Call

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 150 mm Caiht7zzc3 MK 4 480 x 480 mm 0,1 - 0,2 mm/U M 22 (St 60) 35 mm 80-1170 U/min 1,45 kW 0,34 t 0,8 x 1,0 x 2,0 m Accesories: -Machine light (built-in) -Coolant device in the foot (built-in)

more

Listing

Ahaus

(dealership location)

7,617 km

ALZMETALL ALZSTAR 30/S

Call

Condition: new, bore capacity in steel (diameter) 30,0 mm throat 293 mm bore stroke 140 mm Beobzzhwql morse taper 3 MK table: 514 x 360 mm turning speeds 225 - 4.300 U/min engine output 1,0 / 1,6 kW column diameter 115 mm weight 260 kg Machine height 1.790 mm Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

more

Listing

Lahr/Schwarzwald

7,901 km

Drilling Machine

GILLARDON GSB 32 D

Call

Condition: used, Year of construction: 1977, bore capacity in steel (diameter):32 mm throat:350 mm throat:350 mm Bh0vnuph9ve bore stroke:200 mm table surface area:400 x 400 mm thread capacity:M 42 taper MK:4 total power requirement:~ 3,5 kW weight of the machine ca.:450 kg feed drive system

more

Listing

Velen

7,625 km

UWM UWM 40T

Call

Condition: new, bore capacity in steel (diameter) 40 mm throat 330 mm Binyqt2cjgw bore stroke 190 mm spindle taper MT 4 MK table: 500 x 400 mm column diameter 140 mm turning speeds 90 - 1500 U/min total power requirement 2,2 kW weight of the machine ca. 435 kg. range L-W-H 570 x 930 x 2170 mm

more

Listing

Gütersloh

7,706 km

drill press

Gillardon GB 30

€2,900

Call

Condition: used, Drilling capacity in steel 30 mm Tool holder MT 3 2 different engine speeds Stepless speed adjustment with display Djpmpd

more

Listing

Hamburg

7,690 km

AC 32 AS HAST Alzmetall

€2,500

Call

Condition: ready for operation (used), Year of construction: 1998, Available immediately from location : Column drilling machine Alzmetall Type AC 32 AS HAST Year of construction 1998 Mounting steep cone Table 600 x 535 mm Drilling capacity 32 mm steel Tapping up to M 32 Spindle speeds 55 - 5000 rpm Drive 3 kw Coolant device Multi-spindle drilling head holders Weight 900 kg At a price of Euro 2,500 plus VAT ex location Bikbthry0j0

more

Listing

Leipzig

7,966 km

Upright Drilling Machine

ALZMETALL AB3HST

Call

Condition: used, Year of construction: 1989, bore capacity in steel (diameter): 36 mm throat: 335 mm bore stroke: 180 mm spindle taper MT: MK 4 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1-0,2-0,3 / automatisch+manuell mm/U Wcnpemhb Distance spindle/table max.: 250 - 950 mm table clamping surface:: 465 x 600 mm dimension machine xH: 0,9 x 0,8 x 2,15 m table rotating: 360 ° column diameter: 230 x 950 mm total power requirement: 1,1 kW weight of the machine ca.: 273 kg drill table adjustment: verical 700 mm Thread cutting with changeover switch, running direction foot switch right/left rotation Equipment: Quick-action clamping chuck RÖHM Spira 1 - 13mm

more

Listing

Ahaus

(dealership location)

7,617 km

ALZMETALL ALZSTAR 23/S

Call

Condition: new, bore capacity in steel (diameter) 23,0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4.300 U/min engine output 0,6/0,95 kW column diameter 90 mm weight 175 kg Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation Ciqpghfbpc - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

more

Listing

Barsbüttel/Hamburg

(dealership location)

7,700 km

IMATEC AV 32

Call

Condition: used, bore capacity in steel (diameter):32 mm throat:290 mm bore stroke:150 mm 2wynqa spindle taper::MK 3 speeds::80-1170 U/min clamping table:480 x 400 mm total power requirement:1,3 kW dimensions of the machine ca.:1000 x 700 x 2200 mm weight of the machine ca.:500 kg

more

Listing

Velen

7,625 km

KAMI BKM 5030

Call

Condition: new, bore capacity in steel (diameter) 30 mm throat 260 mm bore stroke 135 mm spindle taper MT 3 MK table: 420 x 350 mm column diameter 135 mm turning speeds 125 - 3030 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,1 kW weight of the machine ca. 380 kg. range L-W-H 0,9 x 0,55 x 2,2 mm High-quality drill press with a high speed range for the Ysshbw industrial use.

more

Listing

Wasbek

7,654 km

KNUTH Werkzeugmaschinen KSB 32A

€7,950

Call

Condition: new, Sturdy box column design reduces torsion and vibration for superior drilling, reaming and tapping performance Dmngap Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.

more

Listing

Schemmerhofen

8,027 km

Alzmetall AB 40 SV

€4,400

Call

throat depth: 350 mm, drilling capacity: 40 mm, Condition: excellent (used), Alzmetall AB 40 SV with thread cutting device and height extension (300 mm which can also be removed) Drilling capacity in steel 40 - 45mm in cast iron 45 - 50mm Bikmti0vo98 Speeds 65 - 1750 infinitely variable in 2 gear stages Spindle stroke 180 MK 4 Feed rate 3 steps Drive 3 KW Table D 560 rotatable throat depth 350 Coolant device Dimensions : H 2,3m ( without extension 2m ) D 1,2m W 0,6m Weight approx. 600 KG Condition : very good , all functions perfect Free loading Schemmerhofen

more

Listing

Leipzig

7,966 km

ALZMETALL AB4SV

Call

Condition: used, bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm total power requirement: kW weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment by means of hand crank Huzjqo8 Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D.

more

Listing

Ahaus

7,617 km

MAXION BS 25 ST

Call

Condition: used, Year of construction: 2000, bore capacity in steel (diameter) 25,0 / 30,0 mm L0nhdyhlbz throat 260 mm bore stroke 120 mm spindle taper 3 MK table: 500 x 350 mm T-slots 4x B 14.0 mm turning speeds 120 - 2160 U/min column diameter 110 mm distance spindle /table 90 - 760 mm total power requirement 0,7 / 1,3 kW weight 260 kg range L-W-H 900 x 900 x 1850 mm Machine from a vocational school very good condition (!!) TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including cabinet door * Machine link: ?machineno=1008-9093639

more

Listing

Mindelheim

8,079 km

MIOTAL SB 30 SVG

Call

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Bfgythxbz0 Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

more

Listing

Eislingen/Fils

7,988 km

SOLID BV 28

Call

Condition: used, bore capacity in steel (diameter):30 mm throat:350 mm bore stroke:230 mm feed:0,10 - 0,35 mm/min. bore spindle turning speed range:60 - 1800 U/min surface area:420 x 320 mm column diameter:150 mm column turnable:180 ° machined bearing plate::Ja distance spindle/base plate:1200 mm distance spindle /table:250 - 790 mm taper MK:3 lighting:Ja thread cutting attachment:Ja table surface area:500 x 500 mm Y7kd9urdg total power requirement:1,1 kW weight of the machine ca.:420 kg dimensions of the machine ca.:0,95 x 0,51 x 2,10 m

more

Listing

Velen

7,625 km

ALZMETALL AB 32 HST

Call

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 32 mm throat 350 mm bore stroke 180 mm x-axis 550 mm y-axis 300 mm z-axis 300 mm table surface area 650 x 310 mm 0 55 - 4000 U/min feed ja mm/U total power requirement 4,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,8 x 2,1 x 2,5 m m Bb0hwssd Drilling machine with: - Positioning control for cross table - feed - Thread cutting device - coolant pump - foot switch Drill is functional. Positioning control has not been checked.

more

Listing

Lüdenscheid

7,707 km

FLOTT SB 40 MV Plus (NEU ab Werk)

€11,200

High performance pillar drilling machine

Call

Condition: new, Year of construction: 2023, Standard equipment - Thread cutting device - control panel with OLED display - robust, high quality drill head hood - LED illumination - quick adjustable and ergonomic drill depth stop - infinitely variable speed control via rotary knob - thermal overload protection - spindle stop - drill protection with electrical fuse - connection cable with CEE-plug - mechanical feed of the Z-axis - incl. electromagnetic clutch for 3 feed speeds - drilling cross with push button - in tapping mode: right-left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Tapping capacity max: R1= M30x3.5 / R2= M24x3 / R3= M36x4 Spindle MK IV drilling depth: 160 mm Rf03iae throat depth: 300 mm column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with toothed rack spindle/table: 150-700 mm Spindle speeds infinitely variable: R1 (1-stage) 0-1,000 1/min R2 (1-stage) 0-1.600 1/min R3 (2-stage with primary reduction gearing) 0-4,000 1/min Optionally R1 or R2 without price surcharge Price surcharge R3: € 2.100,- Accessories drilling package 6 (€ 845,00) - vice [felix] 2.0 150 - taper mandrel MK IV/B18 - reducing bushing MK IV/MK II - Reducing bushing MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single shift operation) DELIVERY: free domicile incl. packing DELIVERY TIME: from stock, immediately NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT POINT OF SALE PARTNER

more

Listing

Rödermark

7,854 km

ALZMETALL AB 34 SV

Call

Condition: good (used), Year of construction: 2011, machine/vehicle number: PRJ044435, Offer 23393 Technical data: - Drilling capacity in steel ST 60 34 mm - Drilling capacity in steel ST 60 40 mm - Tapping device ST 60 up to M 24 - Drill spindle holder MK 4 - Drill spindle stroke 160 mm - throat depth 330 mm - Table with 2 T-slots 610 x 430 mm - max. distance table - drill spindle approx. 665 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drill spindle speed infinitely variable 100 - 1800 rpm - Digital speed display - Lighting system - Drive 400 V / 0.6 / 1.8 kW Bhz9v8eq32w - Space requirement approx. W 1000 x H 2050 x D 1150 mm - Weight approx. 470 kg

more

Listing

Ahaus

7,617 km

FLOTT SB 30 STV

Call

Condition: used, bore capacity in steel (diameter) 32,0 mm bore capacity in cast iron 36,0 mm throat 280 mm bore stroke 150 mm turning speeds 120 - 1600 U/min table-size 400 x 550 mm morse taper MK 3 Fzf0t0g feed 0,1-0,2-0,3 mm/U total power requirement 1,5 kW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - continuous speed adjustment via VARIO drive - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop with mm scale - Coolant device with container - Connection cable + 16A plug * Machine link: ?machineno=1008-9103740

more

Listing

Mindelheim

8,079 km

MIOTAL® SB 35 SG

Call

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Bhebfvvuyes Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

more

Listing

Oberrohrdorf

7,986 km

33_Gearbox column drill

STRANDS S25

Call

throat depth: 255 mm, spindle speed (max.): 2,900 rpm, spindle speed (min.): 105 rpm, drilling capacity: 135 mm, Condition: used, machine/vehicle number: 405823, Tool holder: MK3 Motor power 0.65 / 0.9 kW 33ogptcg Table: 500x400 mm Weight 180 kg

more

Listing

Lüdinghausen

7,661 km

Alzmetall AC32AS

€5,450

ONO plus VAT

Call

Condition: ready for operation (used), machine/vehicle number: 520, Small hole in the housing, otherwise ready for use Bhsqkr3embu

more

Listing

FLOTT SB 40 plus R1 oder R2 (NEU ab Werk)

Lüdenscheid

7,707 km

FLOTT SB 40 plus R1 oder R2 (NEU ab Werk)

€9,200

Call

Condition: new, Year of construction: 2023, Thread cutting device OLED display LED illumination Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Tapping capacity max. - R1 M30x3.5 - R2 M24x3 spindle MK IV drilling depth (mm) 160 throat depth (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimension without VP (mm) 610 x 900 x 1.980 mm Machine dimension with VP (mm) 670 x 1.100 x 2.200 mm Motor rotary current 400V with frequency converter (kW) 4,0 Spindle speed stepless R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Feed by hand Weight (kg) 400 20020f Optional drilling package 6 (€ 845.00 plus VAT) - Vise [felix] 2.0 150 - taper mandrel MK IV/B18 - Reducing bushing MK IV/MK II - Reducing bushing MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT POINT OF SALE PARTNER

more

Listing

Holm

7,670 km

ALZMETALL AB3 Modell ESV

€2,990

ONO plus VAT

Call

Condition: used, machine/vehicle number: nicht zutreffend, Description Drilling Machine, Floor Standing Drilling Machine, Pillar Drilling Machine -table size: 315 mm -spindle mounting: MK3 -throat: 285 mm -speeds: 200 - 1400 rpm -columns: Ø 130 mm -spindle stroke: 150 mm 0sz7pj9dq -gearbox: VIP -feed rate: 0,1-0,3 mm/rev. -dimensions: 440/900/H1900 mm -weight: 408 kg Turntable and coolant pump Data subject to change....

more

Listing

Ahaus

7,617 km

Stepless column drilling machine

FLOTT SBM 3 ST

Call

Condition: used, bore capacity in steel (diameter) 32,0 mm bore capacity in cast iron 36,0 mm throat 260 mm bore stroke 120 mm turning speeds 20 - 2000 U/min table-size 290 x 320 mm Ckfapyp9ys morse taper MK 3 total power requirement 1,0 kW weight of the machine ca. 350 kg range L-W-H 500 x 500 x 1800 mm Furnishing : - Column drilling machine - Drive : V-belt - manual spindle feed - Stepless speed adjustment - Working table with T-slots - Height adjustable via hand crank - Adjustable drilling depth stop - Taper mandrel with keyless chuck - EMERGENCY OFF button on the front

more

Listing

Staphorst

7,538 km

Column drill

Bimak

€1,950

EXW Fixed price plus VAT

Call

Condition: ready for operation (used), Used Bimak column drilling machine. Functions working well, cooling pump not present. Huzgt3o Motor switches off automatically as soon as spindle enters upper position. Not clear exactly what type this is. Given column diameter no type 40, probably type 32. Brand: Bimak Type: nn Mains voltage: 400V Spindle intake: MC4 Automatic drill feed: Yes, 4 speeds Column diameter: Ø 115 mm Unloading: 300 mm Table dimensions: 420 x 420 mm Drill clamp: Yes, at bottom of turntable. Drill clamp width: 130 mm Spindle speeds: 14 ( 45 - 1650 rpm) Spindle stroke: 150 mm Motor: 1.5 kW (2 hp) Machine dimensions: ± 750 x 950 x 1900 mm ( W x D x H )

more

Listing

Mindelheim

8,079 km

MIOTAL® SB 25 SRL

Call

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: E0eymybif - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

more

Listing

Schwabach

8,026 km

Gillardon , GB 30

Call

Condition: good (used), Data : Continuous drilling power in ST 60 30 mm 12 speed steps 60 - 2240 rpm spindle motor 1,1 / 1,6 kW . throat approx. 320 mm spindle stroke 170 mm column diameter approx. 120 mm . Byixf9y7h

more

Listing

Lüdenscheid

7,707 km

FLOTT SB P40 STG PV electronic (NEU ab Werk)

€11,900

Call

Condition: new, Year of construction: 2023, Thread cutting device Free cutting device Drilling depth shut-off programmable Drilling depth and speed display - digital Thread cutting device M30 (pitch dependent) Opt. R1: Spindle speeds with primary reduction gear infinitely variable, speed range 100-2000 1/min Opt. R2: Spindle speeds with primary reduction gear infinitely variable, speed range 70-1400 1/min Drilling capacity 35/40 mm spindle MK 4 drilling depth 160 mm throat 300 mm Usable table area (swiveling) 590 x 450 mm feed 0-300 mm/min stepless Table height adjustment with toothed rack Machine dimension (W x D x H) 610 x 850 x 1920 mm motor rotary current 400 V pole-changing 1,5/3,0 kW Weight 420 kg Drill package included: taper arbor B18/ Mk 4 quick-action drill chuck B18/ 3-16 mm Machine vice No. 2 -140 and T-slot bolts Option: Spindle stop and chip breaking module 795,00 EUR Option: Drilling package 6 845,00 EUR Bekllhmrw3 Delivery: free of charge incl. packing Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT POINT PARTNER

more

Listing

Düsseldorf

7,661 km

Solid SHW 30

Call

Condition: good (used), 1 used box column drill, make Solid, type SHW 30 Bfuucz8bf7

more

Listing

Ahaus

7,617 km

IXION BS 30 AV

Call

Condition: used, bore capacity in steel (diameter) 32,0 mm bore capacity in cast iron 36,0 mm throat 280 mm bore stroke 150 mm turning speeds 80 - 1400 U/min table-size 400 x 550 mm morse taper MK 3 feed 0,1-0,2-0,3 mm/U total power requirement 1,1 / 2,0 kW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop Km0yvynbvz - Connection cable + 16A plug * Machine link: ?machineno=1008-9103736

more

Listing

Bitterfeld-Wolfen

7,937 km

Bench Drilling Machine

POWERMATIC HOUDAILLE Modell 1200

Call

Condition: used, bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm H2joz2l spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D.

more

Listing

Wasbek

7,654 km

KNUTH Werkzeugmaschinen SSB 32 Xn

€3,290

Call

Condition: reconditioned (used), Year of construction: 2019, These universal drilling machines have a thick-walled column, powerful drives and robust gearboxes for spindle and feed. Our complete data sheet with all details and technical data can be found here under Documents as a PDF download. Bflyqu9xqwf

more

Listing

Velen

7,623 km

UWM UWM 32 A

Call

Condition: new, bore capacity in steel (diameter) 32 mm throat 257 mm bore stroke 115 mm boring spindle MK 4 boring chuck 16 mm bore depth 120 mm Oc9n9 table surface area 475 x 425 mm column diameter 92 mm total power requirement 1,1 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top

more

Listing

Niederlangen

7,585 km

IBERDRILL B 50

Call

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp Cfgvycwp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

more

Listing

Düsseldorf

7,661 km

Alzmetall AB 4 SV

Call

Condition: good (used), Year of construction: 1984, Drilling capacity in steel (diameter) 35 mm throat 345 mm drilling stroke 170 mm table clamping surface 600 x 450 mm spindle mounting MK 4 feeds 0,09 - 0,16 - 0,28 mm/rev Bcsqhuilbrc total power requirement 3 kW Machine weight approx. 800 kg Machine dimensions L x W x H 1.0 x 0.78 x 1.95 m

more

Listing

Feucht

8,032 km

Saulenbohrmaschine

ALZMETALL AX 3/S

Call

Condition: reconditioned (used), Year of construction: 2000, Column drilling machine Make: ALZMETALL Model: AX 3/S Year of manufacture: 2000 - workshop tested Machine No.: 13587 Speed 160 - 2.250 rpm. Accessories: Bfr92gd0n0o - Drilling depth fine adjustment with Drilling depth fixed stop - machine light - Instruction manual used as seen The machine corresponds technically the state of the art of the year of construction.

more

Listing

Fluorn-Winzeln

7,942 km

Alzmetall AX3/S

€5,200

ONO plus VAT

Call

throat depth: 293 mm, feed length X-axis: 120 mm, spindle speed (max.): 1,125 rpm, spindle speed (min.): 80 rpm, total height: 1,837 cm, drilling capacity: 40 mm, Condition: excellent (used), Year of construction: 2016, Technical data can be found in the pictures. Fully functional, available immediately. Dmmn29 German operating instructions

more

Listing

Fuldatal

(dealership location)

7,804 km

Drill press

WIEGAND Z5030VF bis 5050VF

Call

Condition: new, Year of construction: 2011, New column drilling machines Z5030VF to Z5050VF Drilling capacity from 30 to 50mm Unzzgswc Thread cutting device electro-magnetic feed clutches drilling and milling machines High-speed radial drilling machines Vices tenical data see pdf- document

more

Listing

Velen

7,625 km

UWM UWM 28A

Call

Condition: new, bore capacity in steel (diameter) 28 mm throat 320 mm bore stroke 150 mm Biatedzlpe spindle taper MT 3 MK table: 500 x 350 mm column diameter 105 mm turning speeds 75 - 3010 U/min total power requirement 0,9 / 1,2 kW weight of the machine ca. 235 kg. range L-W-H 1740 x 670 x 850 mm

more

Listing

Bruchsal

7,891 km

Säulenbohrmaschine

Alzmetall AB 3 ES

Call

Condition: good (used), Year of construction: 1995, Column drilling machine Alzmetall AB3 ES Stock number: 02-04-040 Machine data: Year of construction: approx. 1995 L x W x H: approx. 600 x 900 x 2100 mm Weight: approx. 500 kg Machine is in good used condition Available immediately - subject to prior sale Machine workshop tested Technical data: Max. drilling diameter in steel: approx. Ø 32 mm Max. drilling diameter in cast iron: approx. Ø 42 mm Tool holder: MK 3 Speed range: approx. 0-1800 rpm Projection: approx. 290 mm Drill quill stroke: approx. 180 mm B0bcnkax Accesories: -Drill chuck -Emergency stop switch -Hand crank for table adjustment -Complete machine documentation -Thread cutting device -Analog speed display -Transportation, installation & commissioning *optional* Further accessories on request Price and further technical data on request

more

Listing

Düsseldorf

7,661 km

Alzmetall AC 32 AS

Call

Condition: good (used), Year of construction: 1990, Technical data - Clamping surface (left-right): 370 mm - Clamping surface (front-rear): 614 mm - Control: electronic control - quill stroke: 180 mm P3im9 - Speed range up to: 55 - 5000 rpm - throat: 320 mm - Tool holder: MK 4 - Connection voltage: 400 V - Total height approx.: 2.06 m - Documentation - Weight approx.: 600 kg

more

Listing

Lüdenscheid

7,707 km

FLOTT SB M5 ST (NEU ab Werk)

€7,600

Call

Condition: new, Year of construction: 2023, Delivery time: immediately from stock continuous/normal drilling capacity 35/40 mm Tapping capacity max. M30 (pitch dependent). Manual reversing switch for right/left rotation. Undervoltage release, thermal overload protection, spindle MK 4 Drilling depth 160 mm throat 300 mm Column diameter 110 mm Usable table area [WxL] 420x340 mm Speed indicator scale Drilling depth display scale Drilling depth stop with fine adjustment Table height adjustment with rack Motor rotary current 400 V pole-changing 1,5/3 kW spindle speed with primary reduction gear infinitely variable 100-2000 1/min Machine dimensions (WxDxH) 610 x 850 x 1920 mm weight 420 kg 2johiqzz Delivery: free of charge incl. packing. WORKING WARRANTY: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT POINT OF SALE PARTNER

more

Listing

Brieselang

7,915 km

UNION Gera Saalfeld BS 32 AI

Call

Condition: good (used), Bohrleistung 32 mm,Gewindschneiden 20 mm,jeweils in Stahl , MK 63-1000 U/min, 3,2 KW Dmcipf

more

Listing

Ennepetal

7,685 km

Highl. Column drilling machine

FLOTT SB 25 STV

Call

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) / mm throat / mm H0o70qq2u bore stroke / mm total power requirement 1,5 kW

more

Listing

Rödermark

7,854 km

GILLARDON GB 30 VE

Call

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0123373, Offer 23241 Technical data: - Drilling capacity in steel ST 60 32 mm - drilling capacity in steel ST 60 40 mm - Tapping device up to M 27 - Drilling spindle holder MK 3 - drilling spindle stroke 175 mm - Drilling spindle speed infinitely variable 60 to 1600 rpm Bfr8y0nhzg7 - 3 feeds electr. magnetic engagement 0,1 ; 0,16 ; 0,25 mm/rev - throat 290 mm - max. distance drilling spindle - table 790 mm - max. distance drilling spindle - base plate 1210 mm - table with 2 T-slots 570 x 475 mm - height adjustable via toothed rack with hand crank - table left + right tiltable - Drive with reinforced motor 400 V / 1,6 / 2,9 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - weight approx. 450 kg - with: - coolant device in base plate - quick-action drill chuck 1-13 mm - emergency stop button - illumination - machine vice

more

Listing

Ahaus

7,617 km

ALZMETALL AB 34 SV

Call

Condition: new, bore capacity in steel (diameter) 34,0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm bore capacity in cast iron 40,0 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0,1-0,2-0,3-0,4 mm/U total power requirement 1,4 / 2,2 kW weight 470 kg height of the machine 1865 m Nloin Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

more

Listing

Ahaus

7,617 km

ALZMETALL AB 34 iTRONIC

Call

Condition: new, bore capacity in steel (diameter) 34,0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1.800 U/min engine output 1,4 / 2,2 kW column diameter 145 mm thread M24 ST60 thread M30 GG20 feed 0,1-0,2-0,3-0,4 mm/U weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display Ciqpoiuzl7 * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

more

Listing

Ahaus

7,617 km