Condition: good (used), Year of construction: 1977, Functionality: fully functional, machine/vehicle number: 150-5036, Used in working condition Crsb Hbgrevvrh Hj Hsb

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, wheel width: 380 mm, TECHNICAL DESCRIPTION: Linear axes: – Radial slide (X-axis) – Tangential slide (Y-axis) – Axial slide (Z-axis) - Tailstock (Z4-axis) Rotary axes: – Milling head (A-axis) – Workpiece table (C-axis) – Swivel gripper for automatic workpiece change (E-axis) Spindle: – Milling cutter (S-Spindle) TECHNICAL DATA: – Control: SIEMENS SINUMERIK 840D Gear hob: – Largest permissible tip diameter: 130 mm – Greatest length (depending on milling arbor diameter): 220 mm - the max diameter of gear 380mm (depending of diameter of Hob) MACHINE Milling arbors: – Diameter: 40 mm – Acquisition cone: Steep cone ISO 40 Sledding trails: – Radial (X-axis): 185 mm – Tangential (Y-axis): 200 mm – Axial (Z-axis): 250 mm Largest milling head swivel angle: – Direction +A: 35° – Direction -A: 45° Crsb Hbjvdnm Uegr Hjb Workpiece table: – Outer diameter: 300 mm – Boron: 80 mm Speeds Rapid traverse/Feeds: – X-axis: 10.000 mm/min – Y and Z axis: 5.000 mm/min Drehzahlen: – Tool: 90 – 900 rpm – Workpiece table: 1 – 55 rpm Electrical equipment: – Operating voltage: 380/400 V – Supply voltage: 230 V – Control voltage: 24 V – Frequency: 60/50 Hz – Connected load of the machine: 48 kVA – Cable cross section: 25 mm2 – Protection: 100 A Overall dimensions of the machine: – Length/Width/Height: 6.435 x 4.930 x 3.210 mm – Machine weight approx: 11500 kg EQUIPMENT: – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace – Documentation Notes: Machine with Load conveyor Machine in excellent condition Complete maintenance 12/2024 Machine with Dialog Program

Condition: ready for operation (used), Year of construction: 1951, overall weight: 9,000 kg, Oerlikon Spiromatic 2 Fiat Mammano Cutter heads Tpl 120,150,180,260 Cobjvfpf Uj Hbgr Horb Cutter Inspection Tool cabinet with change gear and accessory

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min Crob Hbeizlh Hjgr Hjb spindle bearing diameter: 100 mm Pick-up machine *

Condition: ready for operation (used), Gear shaper STANKO 5M150 Max diameter of gears cut 800 mm Max module 12 mm Max cutter stroke 200 mm Saddle indexing gear diameter: 360 mm Axes distance (tool and table) 0-700 mm Largest tool diameter 200 mm Cutter arbor diameter 44.443 mm Taper M5 Table diameter 800 mm Distance from floor to table 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double s.p.m. 33-188 mm Cob Hbgreqcvkvj Hsrb Range of table feed rates per cutter double stroke: -Circular 0.2-1.5 mm -Radial 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimension: 3100x1800x3500 mm Weight: 10200 kg

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 26182, used it is in working condition Crsb Hovu Tdajbgr Hsb

Condition: used, Year of construction: 2001, Technical details: workpiece diameter: 38 mm workpiece length: 500 mm rack milling length - max.: 610 mm profile width: 92 mm Csb Hbottxhasgr Herb module range: 0,3-1,3 slide stroke: 760 mm drive motor: kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 24 kW weight of the machine ca.: 10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves *

Condition: ready for operation (used), Gear hobbing machine model 5A342 Manufacturer: KOLOMNA (Russia) Cob Hbgrju Avt Dj Herb Year of manufacture: 1970 Main technical data: Max gear diameter: 2000 mm Max module: 25 Table diameter: 1800 mm Maximum table load: 10 t Main motor power: 14 kW Overall dimensions(LxWxH): 6910 x 2990 x 3462 mm Weight of the machine: 31800 kg Accesories: Set of change gears ; Aditional hobbing head tooth by tooth Arbors Some supports

Condition: good (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 70303, workpiece weight (max.): 60 kg, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, overall weight: 4,800 kg, power: 16 kW (21.75 HP), Fully functional Crsbotrxp Do Hbgr Heb

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Crjb Hberpcbbsgr Heb Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor *

Condition: ready for operation (used), Rack shaping machine EZ-9V Processing length: 1200 mm Max. module: 12 mm Max. rack width: 200 mm Length of cut rack: 1100 mm Width of cut rack: 170 mm Cut module: 12 Weight: 10200 kg Cob Hbeuw Tvfogr Hsrb Rack shaping machine is intended for cutting of teeth of gear racks by using a method of work-piece running with a gear cutter. Rack shaping machine allows to make spur and helical gear racks of up to 1200 mm long and 12 mm maximum modul

Condition: good (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 63577, workpiece weight (max.): 60 kg, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, power: 16 kW (21.75 HP), Fully functional Creb Hbgrstrwibs Hjb

Condition: used, Year of construction: 2006, Technical details: rolling capacity max.: 6,1 t workpiece diameter: 160 mm workpiece length: 25 mm total power requirement: 14 kW weight of the machine ca.: 4000 kgs Csberb H Rws Hbgr Herb dimensions of the machine ca.: 2,5 x 2,5 x 2,1 m Internal rolling machine for transmission shift sleeves *

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator -2 machines Max gear diameter 800 mm Max module 16 Crjb Hbsum Ez Rsgr Hsb Max gear ring width 125 mm Number of theet 5-150 Spindle speeds range 20-125 rpm Main motor power 7,5 kW Overall dimensions LxWxWxH 3170x2180x2200 mm Weight 15 t

Condition: used, Year of construction: 2015, Technical details: weight of the machine ca.: 4 t Crebel Ha Ubo Hbgr Hsb

Condition: ready for operation (used), Gear Grinding Machine STANKO 5A851 Module 2-10 Gear diameter 35- 320 mm Number of teeth 10- 120 Gear width 220 mm Maximum angle of the ground teeth 45 degrees Spindle speed 2650 rpm Distance between centers 300-360 mm Dimensions 3170x1820x1820x202020mm Machine weight aprox 7 to Cjb Hbgsuc T Ivjr Hsrb

Condition: used, Year of construction: 1997, Technical details: workpiece diameter: 38 mm Creb Hbgetxdmdor Hob workpiece length: 500 mm rack milling length - max.: 610 mm profile width: 92 mm module range: 0,3-1,3 slide stroke: 760 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: 24 kW weight of the machine ca.: 10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves *

Condition: ready for operation (used), Straight bevel gear generator SARATOV 5C276P Max Module 10 Cjbouc T Hxs Hbgr Horb Max. gear wheel diameter 500 mm Max. gear wheels cone distance 250 mm Max. gear ring width 80 mm Min. angle of dividing cone (pitch), degrees 5 Number of wheel teeth: 10 - 150 Distance between spindle and machine center, mm - max. (stock angle 5 degrees) 375 mm; - min. (stock angle 90 degree) 75 mm Stroke 100 mm Slider double stroke 48 - 400 spm Motor capacity 4 KW Machine dimensions 2885 x 2570 x 1995 mm Machine weight 8750 kg

Condition: used, Year of construction: 2016, Technical details: weight: 22 t Crsb Houdf Evobgr Hob

Condition: excellent (used), Max wheel Ø 2000 mm Cob Hbsfx Ibnsgr Hsrb Module + 12

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Crob Hbgreqvcnnj Heb Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Crjb Hetvhwhsbgr Hob Machine out of prototype production Without automation *

Condition: used, Year of construction: 2004, Technical details: Crob Hbgeiwu Sner Hsb workpiece diameter: 38 mm workpiece length: 500 mm rack milling length - max.: 610 mm profile width: 92 mm module range: 0,3-1,3 slide stroke: 760 mm drive motor: kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 52 kW weight of the machine ca.: 10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves *

Condition: used, Year of construction: 2003, Technical details: max. wheel diameter: 300 mm Crsboldk T Te Hbgr Hob gear width: 100 mm max. module: 5 workpiece turning speeds: 0 - 1000 1/min work piece - max.: 1100 mm workpiece clamping: auto. tension device number of spindle speeds: 1000 1/min. spindle bearing diameter: 100 mm diameter of spindle flange: 120 mm tailstock travel: 80 mm weight of the machine ca.: 3500 KG dimensions: 1200 x 1450 x 2250 mm total power requirement: 10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility. *

Condition: used, Year of construction: 2001, Technical details: Creb Hstvhw Nobgr Hsb max. wheel diameter: 40-200 mm total power requirement: 31,3 kW weight of the machine ca.: 4 t