Used Bevel gear generators spiral for sale (15)

Condition: good (used), Year of construction: 2000, Gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Bzdkxrqf Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: like new (used), Year of construction: 1977, max gear diameter 745,5 mm - max radial setting 266,7 mm - pitch-coarsest 16,9 mod - full dept max 31,8 mm - max face width 116,8 mm - index range 5-80 inclusive - diameter of taper hole at large end 152,4 mm - taper per foot 19,0 mm - depth of taper 152,4 mm - diameter of hol through spindle 127,0 mm - cutter diameter 9, 12, 16 and 18 inches - max offset above center 114,3 mm - max offset bellow center 114,3 mm - max machine center to spindle nose 596,9 mm - cutter speeds 19-167 stepless - feeds infinitely variable from 7 s per tooth minimum - dimensions 4600x3000x2800 mm 2Vv8Pe - Weight: 24000 kg

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator -2 machines Max gear diameter 800 mm Max module 16 Max gear ring width 125 mm Number of theet 5-150 Spindle speeds range 20-125 rpm Main motor power 7,5 kW Overall dimensions LxWxWxH 3170x2180x2200 mm Weight 15 t Gxczkv3

Condition: good (used), Diameter: 800mm Fzjdh2W

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 range of tooth size 65 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m The machine is complete and in good working condition. Equipment / Accessories: - complete set of change gears - 4 pcs. cutter heads - assorted selection of blades - English operator manuals Ub7E83Ir09

Condition: like new (used), Specifications Manufacturer MODUL Model ZFTKK 500/2 W Dpok0V Condition Used Tilting of hob spindle 0....8 gradi Hob spindle speed 45-224 giri/min Max workable diameter 540 mm Maximum module 16 Max tooth range 78 mm Range no. teeth 6....100 Machine weight 12000 Kg Description Roughing and finishing machine

Condition: good (used), Gear diameter: 508 mm, Total height: 1,780 mm, Total length: 2,990 mm, Total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Blfgxmacqui Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Year of construction: 1987, Spiral bevel gear dia. 800 mm Cljnbogx80

Condition: ready for operation (used), Gear Generator Spiral Bevel & Hypoid 5C270P Max diameter of wheels : 500 mm, Cpqsdny9Kc max normal module : 8 mm, Max height of wheel tooth : 22 mm, Max cone distance of gear wheels : 220 mm, Max width of gear ring : 80 mm, Number of wheel teeth : 5-150, Min angle of dividing cone : 5, Stock angle : max:+90, min:+5, Distance of end face from the spindle to the center : max (when stock adjusting angle is 5 degree) : 450 mm, - min (when stock adjusting angle is 90 degree) : 75 mm, Min hypoid displacement : upper-80 mm, down-80mm, Weight of the machine aprox 7 tons.

Condition: good (used), KLINGELNBERG AMKU 630 Dpqkhx

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, Machine/vehicle number: 291127, Wheel diameter: 275 mm, Wheel width: 55 mm, Controller manufacturer: Siemens, Controller model: 840 C, Module thread tooth pitch (max.): 6.5, Module thread tooth pitch (min.): 1.5, Face milling single part process - continuous process: - Workpiece and tool (usually spiron) rotate simultaneously, all teeth are produced in one operation. - Cutter head has several cutter groups (not arranged in a circle) Bstmjmuima - Parallel tooth - Conical tooth head surface Single part process: - Workpiece is stationary and tool (usually Arcon) rotates and cuts a tooth by plunging the tool. - Once a tooth has been cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. - The cutter head has all knives arranged on a circular path. - Conical tooth height - Parallel tooth head surface The C28 can do both, wheel + pinion. For the single part process, a C28 must be "prepared" - i.e. direct measuring system + part gear brake workpiece axis + license file for manufacturing single part process. TECHNICAL DETAILS Control: Siemens 840 C Wheel diameter: max. 275 mm Wheel width: 55 mm Module: 1.5 - 6.5 MACHINE DETAILS Weight: 13 tons

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1 Control 840 C Siemens total power requirement 100 kW Bohfmm9A7Om weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Beon0Rfvuw Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -

Year of construction: 1976, Condition: good (used), Functionality: fully functional, Machine/vehicle number: 748201, Machine including operation and maintenance manual and parts list! Beesac2Jbp3 Complete with cooling lubricant supply, chip conveyor and hydraulic unit. TECHNICAL DETAILS bevel gear diameter: max. 745 mm module: max. 17 mm gear width: max. 116 mm Gear ratio: max. 1:10 Cutter head diameter: 9,12,16 and 18 inch Axis angle: -8 to 90 MACHINE DETAILS power supply: 400 Volt, 50 Hz Weight: approx. 24.000 kg

Condition: ready for operation (used), Straight bevel gear generator SARATOV 5C276P Max Module 10 Max. gear wheel diameter 500 mm Max. gear wheels cone distance 250 mm Max. gear ring width 80 mm Min. angle of dividing cone (pitch), degrees 5 Number of wheel teeth: 10 - 150 Distance between spindle and machine center, mm - max. (stock angle 5 degrees) 375 mm; - min. (stock angle 90 degree) 75 mm Dpoxbt Stroke 100 mm Slider double stroke 48 - 400 spm Motor capacity 4 KW Machine dimensions 2885 x 2570 x 1995 mm Machine weight 8750 kg