Used Bevel gear grinding machines for sale (13)

Condition: used, Year of construction: 2000, machine/vehicle number: 291.179, max. wheel diameter:275 mm Cii7zoyafc gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process

Condition: good (used), Model No. WNC 80 KLINGELNBERG “CNC” spiral bevel gear grinding machine suitable for the hard finishing of spiral bevel and hypoid bevel gears and pinions which are pre-machined with cutter heads in either face-milling or face-hobbing processes up to 31.49” (800mm) pitch diameter, DP 25 TO 1.4 (module 1 to 18) and 5.12” (130mm) maximum face-width, utilizing non-dressable plated CBN wheels, or dressable wheels such as conventional aluminum oxide, SG, and/or vitrified type, employing the on-board dressing device with diamond dressing roll The machine corresponds to the attached copy of factory literature, featuring the following: FEATURES / EQUIPMENT: • Machine with double-spindle wheelhead design allowing the convex and concave tooth flank to be ground and finished in one single operation • Double-spindle wheelhead also provides possibility of rough and finish grinding separartely, with two grinding spindles equipped with one roughing and one finishing wheel. • Stationary dressing unit at the back of the machine base, with dressing spindle which can be swiveled via hydraulic cylinder into the work range of the machine for dressing of the grinding wheels • Swivellable stock dividing device for centering dressed grinding wheels • Full machine enclosure, with sliding door and safety-glass window, and integrated electrostatic oil-mist suction device • IBH “CNC” control with color CRT and spiral bevel gear grinding software with user-friendly conversational dialogue programming, with data interface directly from a central computer. o DNC- Software as basic program for the different Software options o Grinding of spiral bevel gears according the Wiener " 2 Spur process ". o Grinding of the concave and convex flank with two different wheels and with different machine set-up parameters. o Generating & plunge grinding cycles (Formate gears, face couplings). o Software for grinding Gleason gears and pinions. o Servomotors and drives from Bosch/Rexrroth   • Machine and IBH controller in “optional” 6-Axis execution with the following motorized movements CNC-controlled: A-Axis (Machine distance adjustment axis) X-Axis (Tooth depth adjustment and plunge advance axis) Y-Axis (Rotation axis) Z-Axis (Workpiece rotation axis) V-Axis (Mounting distance adjustment axis) W-Axis (Axial offset adjustment axis) • Central lubrication system and hydraulic aggregate incorporated within machine’s full enclosure Jes7u9pqrv with easy-access panels for maintenance • Full complement of electrics (motors/controls), air-conditioned electric switch-gear cabinet, buss-ducting, conduit, arranged for 480 Volt, 60 Cycle operation • Complete coolant plant (HOFFMANN ERK-75V) with cooler-chiller, and paper-band filtration unit with delivery capacity of 120 l/min. at a pressure of 10 bar • Two (2) grinding wheel flanges • One (1) diamond dressing wheel • Full machine documentation (operator’s manual for the machine and controller, electrical and hydraulic diagrams, parts list, etc.)

Condition: good (used), Year of construction: 2005, machine/vehicle number: 29319, Functionality: fully functional, TECHNICAL DETAILS Cbeo0mrqfy Control: Siemens Sinumerik 840D bevel gear diameter: max. 275 mm module: max. 8 mm gear width: max. 58 mm transmission ratio: max. 1:10 grinding wheel diameter: 230 mm WAGURI eccentric grinding spindle: yes MACHINE DETAILS operating voltage: 400 V / 50 Hz Power consumption: approx. 83 kVA Weight: approx. 10.000 kg

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Bhl0wh2nnv WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth10mm Max. workpiece Ø (for clearance)1,010mm Max. external Ø of coupling610mm Sliding base withdraw216mm Max. distance from grinding wheel to workpiece nose90 - 430mm Max. weight of workpiece, including clamp500kg No. of teeth32 to 150 Grinding wheel Ø, approx152 - 320mm Grinding wheel speeds, infinitely variable0 - 3,600rpm Work spindle bore60mm Total electrical load, approx.15 kW - 380 V - 50Hz Weight, approx.9,500kg Accessories / Special Features *Automatic roughing and finishing process via pre-settable counter and built-in feed cam. *Counter for number of teeth. *Counter for number of dressing cycles. 0vx0o * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: used, Year of construction: 2005, machine/vehicle number: M750.42930, weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm Fq88q0z x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

Condition: used, Year of construction: 2006, machine/vehicle number: 984101, Functionality: fully functional, TECHNICAL DETAILS Control: Siemens Sinumerik 840D bevel gear diameter: max. 275 mm module: max. 8 mm gear width: max. 58 mm transmission ratio: max. 1:10 grinding wheel diameter: 230 mm WAGURI eccentric grinding spindle: yes T2fmpnv MACHINE DETAILS operating voltage: 400 V / 50 Hz Power consumption: approx. 83 kVA Weight: approx. 10.000 kg

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm B7vmyvw8qd z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece215mm Tooth profile, height x width16 x 40.65mm No. of teeth5 - 200 Max. tooth ratio1 : 10 Grinding wheel Ø51 - 190mm Grinding wheel speeds1,000 - 6,000rpm X Axis (horizontal)152mm Y Axis (vertical)178mm Z Axis (slide base plate)304mm Distance from middle of machine to middle of workspindle115mm Axial speed125 mm/sec Workpiece speeds0 - 30rpm Workspindle bore, conical3 29/32inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features *FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. *Extensive coolant equipment with filter system, band filter, etc. *Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. *Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Btlrgu00 Condition :Very good - machine can be inspected here under power Delivery :Ex stock, as inspected Payment :Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 2007, machine/vehicle number: 985502, max. wheel diameter:275 mm gear width:58 mm max. module:8 Iu2itxt3y min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5

Condition: used, Year of construction: 2011, machine/vehicle number: 292 423, max. wheel diameter:300 mm max. module:8 min. module:0,7 weight of the machine ca.:19 t grinding wheel diameter:50-230 mm grinding spindle speed:7.500 U/min Cxsadb8y8y with loading

Condition: used, Year of construction: 2002, machine/vehicle number: 29 015, max. wheel diameter:130 mm gear width:170 mm max. module:3 min. module:0,5 total power requirement:48 kVA weight of the machine ca.:9 t dimensions of the machine ca.:7,64 x 3,14 x 3,25 m G8hw7qwlvp For technical data, see PDF-File enclosed

Condition: used, Year of construction: 2002, machine/vehicle number: 952110, max. wheel diameter:215 mm gear width:40.65 mm Largest Speed Ratio:1:10 Cwz2sbbggs x-axis:(horizontal) -152 to 102 mm y-axis:(vertical) -102 to 178 mm z-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mm b-axis:3 - 90 ° max. distance machine center to spindle slide:115 mm max. nos. of teeth:5 - 200 ( inclusive ) St. workpiece external diameter max.:215 mm tooth profile - width x height:16 x 40,65 mm grinding wheel diameter:51 -190 mm grinding wheel turining speeds:1000 - 6000 1/min workpiece turning speeds:0 - 30 1/min workpiece spindle bore:konisch 3-29/32 " speed of axis:125 mm/sec. total power requirement:20 kW - 380 V - 50Hz kw weight of the machine ca.:10000 kos. dimensions of the machine ca.:4750 x 3400 x 2540 mm Model 200HG GLEASON Phoenix CNC Hypoid Spiral Bevel Gear Grinding Machine, Serial No. 935003, New 1999. Suitable for the hard finishing of spiral bevel, zerol bevel,and hypoid gears and pinions up to 8" (215.90mm) pitch diameter at 5:1 ratio, 1.6" (40.65mm) maximum face-width, utilizing non-dressable plated CBN wheels, or dressable wheels such as conventional aluminum oxide, SG, and/or vitrified CBN type . - Mhine furnished with free standing, air conditioned electrical enclosure, w/operator's controls located at machine front, adjacent to access door - GE-FANUC Series 150 Momputer Control , 10.4" LCD flat color display, storage capacity for 100 summaries, cycle fault monitoring, and automatic setup and control of 7 axes: (A ) Work Spindle, (B) Swinging Base, (C) Wheel Spindle, (D) Dresser, (X) Horizontal, (Y) Vertical, (Z) Sliding Base - Machine arrangement as 200HG Grinder - Manual stock dividing system - Wheel dressing unit (dressing cycle via cnc) - Totally enclosed work-area guarding w/powered access door - Work chamber lighting - Hydraulic work piece chucking with draw-rod - Flooded suction-type hydraulic unit Axes Speeds X-Horizontal 4.92"/Sec. (125mm/Sec.) Y-Vertical 4.92"/Sec. (125mm/Sec.) Z-Sliding Base 4.92"/Sec. (125mm/Sec.) A-Workspindle RPM..... 0 to 30 B-Sliding Base..... 0 to 30 deg./sec. C-Wheel Spindle..... 1000 to 6000 RPM D-Dresser Spindle..... 1500 to 8000 RPM Root Angle Range (B-Axis)..... -5 deg. To 90 deg. Equivalent Root Angle Range..... -8 deg. To 90 deg. (Equivalent refers to cradle type machine) Full Depth (Maximum)..... .0.615" (16.00mm) Face Width (Maximum)..... .1.600" (40.65mm) Range of Tooth Numbers..... 5 to 200 inclusive Maximum Gear Pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Wheel Diameter..... 7.5" Diameter Wheel At the Following Ratios: 1:1..... 6.75" (171.45mm) 2:1..... 8.50" (215.90mm) 5:1..... 8.50" (215.90mm)