Used Vertical gear hobbing machines - gear diameter 0-299mm for sale (17)

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Lhslhewiwchscdw Ejg Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: ready for operation (used), max. wheel diameter 150 mm gear width 1 - 200 mm max. module 4 min. module 1 control Sinumerik 840 D table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min Lolhcjvzhg Nsdw Eshg shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system and workpiece magazine.

Condition: used, Year of construction: 1967, Largest diameter: 250 mm Largest module: 5 Largest axial feed: 275 mm Tangential cutter displacement: 100 mm 45-degree bevel milling Minimum number of teeth to be milled: 8 Largest cutter diameter: 145 mm Table diameter: 300 mm Weight: 4500 kg Space required: 3 x 1.2 x 2.2 m Accessories: Change gears Counterholder Milling spindle Chip conveyor Ljlhewmrmvscdw Ejhg

Condition: used, Year of construction: 2000, Functionality: fully functional, table diameter: 132 mm, wheel diameter: 130 mm, spindle speed (max.): 3,500 rpm, tool diameter: 80 mm, swivel angle A-axis (min.): -40 °, swivel angle A-axis (max.): 40 °, Gear Hobbing Machine - Vertical SAMPUTENSILI S130 CNC Module Well-maintained CNC vertical gear hobbing machine for shafts and gears with tailstock Also suitable for hard milling (good for steering pinions) TECHNICAL DETAILS Control type: CNC Control name: Sinumeric 840C Gear diameter: max. 130 mm Module: max. 3 Total power requirement: 15 kW Machine weight: approx. 6 t Space required: approx. 2.3 m x 2.5 m x 2.17 m Rapid traverse radial, axial: 10,000 mm/min Rapid traverse tangential: 7,500 mm/min Max. gear diameter: 130 mm Max. module: 3 mm Tangential slide travel: 200 mm Radial Sliding travel: 10/100 mm Axial slide travel: 300/200 mm Milling head speed: 250-3500 rpm Milling head: Tiltable up to ± 40° Tool diameter: 80 mm Tool length: max. 240 mm Table speeds: 5-1000 rpm Milling spindle drive: 15 kW Feed range: 0.1-2000 mm/min Table diameter: 132 mm MACHINE DETAILS Control: Sinumerik 840 C Lslhowmb Nyocdw Eshg Connected load: 40 kVA Motor power: 15 kW Weight: 6 t Dimensions: 2300 x 2500 x 2170 mm EQUIPMENT - Hydraulic workpiece clamping - Automatic loading system - Magnetic Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Lhjlhcdjwmbrnjw Eog Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, module thread tooth pitch (max.): 3, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Lhelhcdwjwmbnps Eog Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Condition: excellent (used), Year of construction: 2004, CNC Gear Hobbing Machine Horizontal . no tailstock, just for chuck parts . max. gear diameter: 90 mm Lhelsqaf U Tjhcdw Eeg . max gear width (b): 50 mm . max module: 3

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t Lholhcovkpugjdw Ejg table turning speeds: 100 U/min table diameter: 250 mm min. number of teeth: 4 hob turning speeds: 1500 U/min max. hob diameter: 160 cutter length max.: 230 mm Machine in good condition. Available 01.08.2024 *

Condition: like new (used), Year of construction: 2004, power: 44 kW (59.82 HP), More Photos coming soon hob cutter: -Largest permissible tip circle diameter: 80 mm Largest toothed length: 70 mm Largest total length: 240 mm Taper for trimming with counter bearing steep taper 1:3, 4286 Mounting diameter of the collet: 32 mm Sliding paths: Radial (X-axis): 100 mm Tangential (Y-axis): 160 mm Axial (Z-axis): 300 mm Tailstock (Z4 axis): 350 mm Loading gantry (X5 axis) 3800 mm Largest milling head swivel angle: Direction +A: 40 degrees Direction A: 40 degrees Workpiece spindle: Outer diameter: 160 mm Bore: 63 mm Overall dimensions of the machine: Length: 9130 mm Width: 3895 mm Height: 3200 mm Gain of the machine: 8400 kg Feed rates: X and Z axes: 1 to 10000 mm/min Y axis: 1 to 5000 mm/min Rapid traverse: X, Z and Z4 axes: 10000 mm/min Y axis: 5000 mm/min X5 axis: 150 mm/min Speeds: Tool: 300 to 4000 min^-1 Workpiece spindle: 0 to 1000 min^-1 Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48 kVA Cable cross-section: 35 mm2 Fuse protection: 70A wälzfräser: -Großter zulassiger Kopfkreissdurchmesser: 80 mm Groste verzanne Lange: 70 mm Größte Gesamtange: 240 mm Kegel zum Abstutzen m Gegenlager Steilkegel 1:3, 4286 Aufnahmedurchmesser der Spannzange: 32 mm Schlitterwege: Lhjljqpf Ifshcdw Ejg Radial (X-Achse): 100 mm Tangential (Y-Achse): 160 mm Axial (Z-Achse): 300 mm Reitstock (Z4-Achse): 350 mm Ladeportal (X5-Achse) 3800 mm Größter Fräskopfschwenkwinkel: Richung +A: 40 Grad Richtung-A: 40 Grad Werkstückspindel: Außendurchmesser: 160 mm Bohrung: 63 mm Gesamtabmessungen der Maschine: Lange: 9130 mm Breite: 3895 mm Höhe: 3200 mm Gewinnt der Maschine: 8400 Kg Vorschübe: Achsen X und Z: 1 bis 10000 mm/min Achse Y: 1 bis 5000 mm/min Eilgänge: Achsen X, Z und Z4: 10000 mm/min Y.Achse: 5000 mm/min X5-Achse: 150 mm/min Drehzahlen: Werkzeug: 300 bis 4000 min^-1 Werkstückspindel: 0 bis 1000 min^-1 Betriebsspannung: 400 V Versorgungspannung: 230 V Steuerspannung: 24 V Frequenz: 50 Hz Anschlußwert der Maschine: 48 kVA Kabelquerschnitt: 35 mm2 Absicherung: 70A

Condition: ready for operation (used), GEAR HOBBING, HURTH – WF 280 Max. Workpiece dia: 300 mm Max. module: 6 Max. hob face width for spur gears: 250 mm Min. number of teeth: 6 Helix angle: +50° /- 45° Working area Min./max. distance between cutter and table: 25 / 260 mm Min. /max. distance work piece table – cutting axis: 200 / 450 mm Max. travel of hob slide: 250 mm Min. / max. distance between table and steady: 350 / 650 mm Max. travel of steady: 300 mm Table bore dia (Ø x depth): 100 x 315 mm Max. travel of shifting slide (Z-travel): 170 mm Space required, approx. 4.8 x 3.0 x 2.5 m Lholhjv I Nkvocdw Eeg Weight of the machine, approx. 13000 kg Other info: The machine is complete in all its parts and accessories

Condition: used, Year of construction: 2002, Functionality: fully functional, wheel diameter: 130 mm, workpiece height (max.): 170 mm, module thread tooth pitch (max.): 3, module thread tooth pitch (min.): 0.5, TECHNICAL DETAILS Control: Sinumerik 840D Tip diameter: 80 mm Toothed length: 170 mm Overall length of hob cutter: 245 mm Collet diameter: 32 mm Tool speed: 300 - 3000 rpm Gear diameter: max. 130 mm Gear width: 170 mm Module: 0.5 - 3 Lslhcsv I Tmuodw Eohg Slide travel radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Workpiece table: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Space requirement: approx. 7.64 x 3.14 x 3.25 m

Condition: reconditioned (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 27604, feed length Y-axis: 170 mm, feed length Z-axis: 200 mm, table diameter: 160 mm, spindle speed (max.): 600 rpm, TECHNICAL DETAILS X-axis: 150 mm Y-axis: 170 mm Z-axis: 200 mm Swivel angle: -150/30° Milling unit Max. hob diameter: 130 mm Max. hob length (shaft mill): 220 mm Max. module: 3 Cutter length: max. 220 mm Cutter speeds: continuously variable up to 600 rpm Milling arbor diameter: 32 mm Table Table diameter: 160 mm Table bore diameter: 63 mm Control & Retrofit Control: SINUMERIK 840 D SIEMENS Retrofit: Sinumerik 840 D / Windows XP Pro in 2010 Lolhcjv Rdwisdw Eehg MACHINE DETAILS Total power requirement: approx. 20 kW Machine weight: approx. 10,500 kg Space required: approx. 6.8 x 3.7 x 2.85 m

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, table load: 1,700 kg, helix angle: 45 °, working width: 200 mm, machining diameter: 250 mm, spindle stroke: 180 mm, TECHNICAL DETAILS Axes: X / Z / A / B / V / C / C1 / Z1 / Y1 / Y2 / Z3 Hobbing cutter diameter: max. 90 mm Table diameter: 145 mm Module: max. 3 mm Number of teeth: min. 4 Milling head swivel angle: ± 45 ° Resolution accuracy: 0.1 ° Workpiece table load: 17 kN Milling cutter speed: 450 - 4,500 rpm Milling diameter of spur gears/helical gears: 125 Lholhcdjvvtxgow Eeg Milling width of spur gears/helical gears: 250 mm (axial) Spindle stroke: 180 mm Milling cutter width: max. 200 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Rated current: 55 A Fuse in the supply line: 63 A

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 7 Lhslhsv Hrqvjcdw Esg weight of the machine ca.: 13 t

Condition: new, Delivery program Eifco hobbing machines Lslsu Egdlshcdw Eehg

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 28634, wheel diameter: 200 mm, controller manufacturer: Siemens, controller model: Sinumeric 840 C, module thread tooth pitch (max.): 3, module thread tooth pitch (min.): 0.5, Machine from prototype production - without automation TECHNICAL DETAILS Control: Siemens Sinumeric 840 C Wheel diameter: max.200 mm Wheel width: 250 mm Module: 0.5 - 3 MACHINE DETAILS Lhslhcot Hkk Rsdw Ejg Total power requirement: 45 kW Supply voltage: 400 V / 50 Hz Machine weight: approx. 8.5 t Space requirement: approx. 4.4 x 2.4 x 2.7 m

Condition: excellent (used), Functionality: fully functional, wheel width: 152 mm, table diameter: 120 mm, wheel diameter: 150 mm, distance between centers: 265 mm, module thread tooth pitch (max.): 5, travel distance milling slide X-axis: 250 mm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, Delivery: approx. 6,000 € to each port - CIF (shipping costs, insurance and freight to the port of destination) Provision: either FCA from location or CIF from port of choice TECHNICAL DETAILS Machine type: 6-axis CNC hobbing machine Control: Siemens 840D Condition: Completely overhauled in 2010 Machining parameters Gear diameter: max. 150 mm Module: max. 5 disk width: 152 mm Cutter slide: max. 250 mm Adjustment path: 200 mm Swivel range of the hob: ± 45° Table data Table clamping surface: 120 mm Minimum/maximum distance between the centers: 15 / 265 mm EQUIPMENT - completely overhauled - complete with all parts and accessories Lhelhjvhcbuecdw Eeg