Used Gear testing machines for sale (6)

Condition: good (used), Workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of H3Azvhhnd Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 2000, Machine/vehicle number: 99 11 5601, length:700-1.100 mm diameter:40-160 mm dimensions of the machine ca.:1,7 x 0,9 x 2,2 m Automatic shaft measuring device for measuring: E2Nqiqm Lengths, diameters, distances, chain dimensions, groove widths, groove diameters, angles, concentricity, etc.

Condition: used, max. wheel diameter 0 mm gear width 0 mm Ikieffv max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines.

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, Travel distance X-axis: 350 mm, Travel distance Y-axis: 250 mm, Travel distance Z-axis: 500 mm, Type of input current: DC, Input voltage: 220 V, Workpiece length between centers: 450 mm, Workpiece diameter (max.): 270 mm, Year of last overhaul: 2024, We are selling a Wenzel Inova Gear gear measuring machine from July 2024. The machine is completely overhauled. Data sheet: - Max. Workpiece diameter = 50 to 270mm- Max. Table load = 50daN - Travel X= 350mm Y=250mm Z=500mm - Counterholder measuring range = 20 to 450mm - Module measuring range from 0.5mm - Space requirement = 2,17m² - Year of construction 2011 - the machine is completely overhauled. - Accessories such as, driver, reference ball etc. as shown - Including 6 jaw chucks with 125mm diameter Software modules: - TMain - program management - TStylus - probe management - TCali - Probe calibration - TAmo - Calculated axis position determination - TGear - Cylindrical gear measuring program for internal and external gearing Bllzlrl7Ej3 - TShaft - Program for dimension, form, position and scanning of unknown contours contours - TWorm - Worm measuring program For further questions please contact

Condition: good (used), Year of construction: 2013, 2013 Gleason 175GMM Gear Inspection System Equipped with: Windows 7 Upgrade 2016 New Computer Upgrade 2016 GAMA Software Update 2016 New Rotary Table Installed 2018 Specifications: Nominal Workpiece Diameter: 175 mm Teip9Keo Module Range: 0.4-6.35 Center Distance: 380 mm

Condition: used, Year of construction: 1999, Machine/vehicle number: 117109, max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min Iiw2Oi7Dl total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)