Used Gear hobbing machines for sale (13)

Condition: excellent (used), Functionality: fully functional, Year of construction: 2013, operating hours: 13,000 h, For Sale Used Emag Koepfer K 300 Gear Hobbing CNC Machine. One owner, in perfect working condition, 13,000 cutting hours. Specs / Config: 9-axis CNC with full gantry automation for work-pieces up to 5 kg. Gravity feed conveyor and chain conveyor equipped. Also equipped with CNC axial position pneumatic radial tool base. Machine is equipped with multiple CNC cutting cycles, including Koepfer dialogue, timing to slot or pin hole with non-contact sensor, two-gear software, hob shifting, taper correction, skiving, and orientation to fixture position. Machine will be supplied with assorted hob arbors, spindle tooling, and tail stock tooling for immediate delivery. Max module 4.0 Work piece diameter 200 mm Guelhcjwxramodwzsd Axial distance 450 The dialogue includes two gears with two hobs in the same clamping. Additionally, this machine is equipped with a probe so you can re-hob a gear that has already been hobbed. The horizontal configuration and the way the enclosure is designed allows you to get very close to both the work spindle and hob head. This makes changeovers easier for the operator. Power: The machine is rated at 25 KVA. If connecting to 480V, it would require 35A fuse protection. For connection to 230V, it would require 50A fuse protection.

Year of construction: 2018, Condition: like new (used), Available because of excess capacity, this machine is in incredible condition and can ship immediately anywhere in the world. Please inquire with us for a price Ex Works, FOB, or CIF. Gjlhcenkdtnodwzjud

Year of construction: 1991, Condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Gelhcjt Hwyljdwzeud Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Condition: excellent (used), Functionality: fully functional, total length: 1,120 mm, gear diameter: 100 mm, total height: 1,680 mm, total width: 1,120 mm, workpiece diameter (max.): 100 mm, milling spindle length: 100 mm, type of input current: three-phase, milling length: 100 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 200 rpm, overall weight: 500 kg, rotational speed (max.): 2,400 rpm, rotational speed (min.): 200 rpm, ⚙️ Mikron Type 132-02 (23) Gear Hobbing Machine – Very Good Condition | For Sale in Ireland 📍 Location: Ireland 💼 Condition: Very Good 🔧 Machine Type: Manual Gear Hobbing Machine ✅ In Stock and Ready for Inspection 🔍 Description: We are offering a Mikron Type 132-02 (23) Gear Hobbing Machine in very good mechanical condition. Manufactured in Switzerland, this machine is designed for precision cutting of spur, helical, and spline gears. Highly regarded for reliability and build quality, it’s an excellent choice for toolrooms, gear repair workshops, and small-scale gear production. The machine is fully functional and ready for immediate delivery from our facility in Ireland. 🧾 Technical Specifications: Manufacturer: Mikron Model: Type 132-02 (23) Control: Manual / Mechanical Gear Types: Spur, helical, spline Workpiece Capacity: Small to medium gears Workholding: Tailstock and chuck Drive Type: Mechanical with gear-driven spindle speeds Country of Origin: Switzerland Max Diameter: 100mm (4") Max Length: 100mm (4") Number of Teeth: 6-400 Max Pitch in Steel: 15 D.P. Max Pitch in Brass & Light Metal: 12 D.P. 12 Hob Revs: Geometrically Graded Between 200-2400rpm Feed: Horizontal or Plunge-Cutting Feed Speed: Hydraulically or Infinitely variable between 0.05 and 1mm per rev. Main Motor: 1.5hp Coolant Pump Motor: 0.1hp Hydraulic System Motor: 0.1hp Dimensions: 1120x1120x1680mm Machine Weight: 500kg Included Accessories: Hob arbors Tailstock 📦 Additional Information: ✅ Located in Ireland – available for inspection ✅ Ready for immediate dispatch 🚛 European and nationwide delivery available Gjlhcewqr T Djdwzjud Mikron gear hobbing machine | Used Mikron 132-02 (23) for sale | Gear cutting machine Ireland | Spur gear hobbing lathe | Manual gear cutting machine UK Europe | Mikron hobbing machine used | Gear manufacturing toolroom machine

Condition: used, Year of construction: 1970, Gear hobbing machine MODUL ZFWZ 6300x40/1 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year: ab.1970 max. wheel dia.: 7100mm gear width: 1500 mm max. modul: 45 table diameter: 5300 mm milling cutter dia. x width: 400x500 mm Guslotxz Ekshcdwzjd max. helical angle: 45 degrees hob diameter: 500 mm hob turning speeds: 9-63 U/min total power requirement: 47 kW weight of the machine: 160 ton equipped with; normal hobbing head, tangential hobbing head, internal milling head, change gears, supports For more informations please contact us. Also you can check our website www .usedmachinetools .ro for more used machine tools for sale.

Condition: used, TECHNICAL DETAILS - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] - Max. tail stock movement : 10 [mm] Gujlhcjuhbqijdwzed - Max. stroke of the plunge Y axis : 5 [mm]

Year of construction: 1991, Condition: used, max. wheel diameter 0 mm max. number of teeth 0 Guolhcdet Hwv Howzjd max. module min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Condition: excellent (used), Functionality: fully functional, total length: 1,120 mm, gear diameter: 100 mm, total height: 1,680 mm, total width: 1,120 mm, workpiece diameter (max.): 100 mm, type of input current: three-phase, milling length: 100 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 200 rpm, overall weight: 500 kg, rotational speed (max.): 2,400 rpm, rotational speed (min.): 200 rpm, ⚙️ Mikron Type 132-02 (M23) Gear Hobbing Machine – Very Good Condition | For Sale in Ireland 📍 Location: Ireland 💼 Condition: Very Good 🧰 Machine Type: Manual Gear Hobbing Machine ✅ In Stock and Ready for Inspection 🔍 Description: We are offering a Mikron Type 132-02 (M23) Gear Hobbing Machine, in very good working condition. This Swiss-engineered model is ideal for high-precision gear cutting, capable of producing spur, helical, and spline gears. Built for reliability and accuracy, it is particularly well-suited for toolrooms, gear manufacturing, and precision engineering applications. 🧾 Technical Specifications: Make / Model: Mikron 132-02 (M23) Machine Type: Manual Gear Hobbing Control: Manual/mechanical (non-CNC) Workpiece Capacity: Small to medium-size gears Spindle Speeds: Manually adjustable gear ranges Hob Slide: Vertical with fine feed adjustment Workholding: Tailstock and chuck system Country of Origin: Switzerland Condition: Very good – clean and mechanically sound Max Diameter: 100mm (4") Max Length: 100mm (4") Number of Teeth: 6-400 Max Pitch in Steel: 15 D.P. Max Pitch in Brass & Light Metal: 12 D.P. 12 Hob Revs: Geometrically Graded Between 200-2400rpm Feed: Horizontal or Plunge-Cutting Feed Speed: Hydraulically or Infinitely variable between 0.05 and 1mm per rev. Main Motor: 1.5hp Coolant Pump Motor: 0.1hp Hydraulic System Motor: 0.1hp Dimensions: 1120x1120x1680mm Machine Weight: 500kg Accessories Included: Hob arbors Change gears and tooling 📦 Additional Details: ✅ Located in Ireland – quick dispatch available ✅ Fully functional 🚛 Nationwide and European delivery available 🔍 Inspection welcome by appointment Mikron M23 gear hobbing machine | Used gear cutting machine for sale | Mikron 132-02 lathe | Manual gear hobber Ireland | Spur and helical gear machine | Toolroom hobbing lathe | Mikron Switzerland gear cutter | Gear hobbing machine in stock Europe Gelewqr S Hshcdwzsud

Condition: used, TECHNICAL DETAILS - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] - Max. tail stock movement : 10 [mm] - Max. stroke of the plunge Y axis : 5 [mm] Guoleuhbqcjhcdwzsd

Year of construction: 1975, Condition: used, max. wheel diameter 280 mm max. number of teeth 100 Guelhcdjt Hw Dkewzed max. module 6 min. module 1 total power requirement 6 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - Distance between centers : 35 [mm] Golhcdweuhbp Sozeud - Max. stroke of the tail stock spindle : 10 [mm] - Max. tail stock movement : 10 [mm] - Max. stroke of the plunge Y axis : 5 [mm]

Condition: used, EQUIPMENT - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl Gjlhcdwsuhbqpozeud - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: used, TECHNICAL DETAILS - part holder spindle speed : 1500 [Rpm] - tool holder spindle speed : 3000 [Rpm] - max part Ø : 50 [mm] - dimensions : 2820 x 2400 x 2500 [mm] - weight : 4200 [kg] Guelhcouhbp Esdwzsd EQUIPMENT - CN SIEMENS 840D - STAUBLI robot 6 axes TX60 with CS8C control - deburring device