Used Thread milling- and hobbing machines for sale
1
max. workpiece diameter 440 mm
threading length 2000 mm
Pwshta
max. module 8
min. module 1
total power requirement kW
weight of the machine ca. 3,8 t
dimensions of the machine ca. 3,7 x 1,1 x 1,6 m
7
Gear hobbing machine make PFAUTER type RS 1
Machine # 3108 Year of construction 1941
technical data:
largest diameter for spur and worm gears
with / without counterholder 400 / 750 mm
largest milling width for spur gears (up to 275 mm drm.
over 275 mm dia.) 295 - 315 mm
smallest number of teeth to be milled 12
largest module pitch 8
helical gears
helical gear angle 10° 30° 45° 60
largest millable wheel diameters 750 / 600 / 500 / 200 mm
Millable widths for largest diameters 270 / 270 / 270 mm
Mi...
1
with div change gears.
Max fräsbarer workpiece diameter. 40 mm (46 mm)
Max workpiece length 75 mm (110 mm)
Max Fräsbarer workpiece length 40 mm
Max fräsbares module 1
maximum cutter diameter. 32 mm (40 mm)
Max milling width 15 mm
Shifting 12 mm
Spindle Tiltable +-6°
Milling cutter speeds of 400-4800 RPM.
Radial & axial feed rates of 0-4 mm / sec.
Bekske3b8i
Tailstock spindle stroke 30 mm (60 mm)
Tailstock moved 61 mm
Weight 800 kg
Accessories: coolant system, various recordings, feeder rail.
10
max. workpiece diameter 600 mm
threading length 7000 mm
max. module 8 / 12
min. module 1
swival range +/- 90 / 115 °
diameter of hob 63 - 140 mm
spindle turning speed - stepless 45 - 450 U/min
total power requirement kW
weight of the machine ca. 12,5 t
dimensions of the machine ca. 9,0 x 2,0 x 2,2 m
Condition: In good condition, checked and partially overhauled by a specialist.
The existing milling head was replaced by an overhauled universal milling head.
Furnishing:
Differential for incl...
14
Gear hobbing machine / gear hobbing machine make NILES type RF 6 M 15
licensed construction Pfauter Chemnitz, year of construction unfortunately not visible
technical data:
gear diameter to be milled for spur gears 1500 mm
gr. pitch to be milled 15 mod.
B0qkdrjf8m
the width of the gear depends on the diameter of the milling cutter
travel of Z-axis (tool axis) about 500 mm
range of the helical gear drm. at
10° spiral approx. 1500 mm
20° spiral approx. 1500 mm
30° spiral approx. 1350 mm
40° spiral...
13
Gear hobbing machine / gear hobbing machine make NILES type RF 6 M 15
licensed construction Pfauter Chemnitz, year of construction unfortunately not visible
technical data:
gear diameter to be milled for spur gears 1500 mm
gr. pitch to be milled 15 mod.
the width of the gear depends on the diameter of the milling cutter
travel of Z-axis (tool axis) about 500 mm
range of the helical gear drm. at
10° spiral approx. 1500 mm
20° spiral approx. 1500 mm
30° spiral approx. 1350 mm
40° spiral approx. 10...
10
Automatic gear hobbing machine make MORAT type B 9for milling gear wheels with straight toothing Technical data:gr. workpiece diameter magazine guide20 mm gr. workpiece diameter without magazine guide70 mm small workpiece diameter1.5 mmgr. Milling length40 mmgr. number of teeth to be milled up to 360kl. number of teeth to be milled5gr. Pitch Module 1kl Pitch Module 0,1Pliers clamping0,5 - 12 mmPower Main motor0,5 PSLpower Return motor1/6 PSLpower Magazine motor1/6 PSWeight approx.400 kgmwithcomp...
