Used machining centers (horizontal) X-axis travel over 1200mm for sale (62)

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Cjdpfxexm Sxvo Aduork Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine was completely overhauled in 2015 and retrofitted with a Siemens 840 D CNC control system! TECHNICAL DETAILS Faceplate diameter: 2,000 mm Turning diameter over the plate: 2,200 mm Travel X-axis: 1,700 mm Travel Z-axis: 400 (+550) mm Faceplate speed range – stepless: 0.28–160 rpm Centre height over plate: 1,140 mm Main spindle diameter: 285 mm Spindle bore: 100 mm Torque at faceplate: 25,000 Nm Max. workpiece weight: 5,000 kg MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 75 kW Dimensions & Weight Footprint: approx. 6 x 3.5 x 3 m Machine weight: approx. 21 t TECHNICAL DETAILS Travel X: 1,850 mm Travel Y: 1,250 mm Travel Z: 1,525 mm Pallet changer type: double Pallet size: 1,250 x 1,000 mm Tool changer: 80 positions Tool holder: ISO 50 Drive: 30 kW Speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feeds – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Control system: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Footprint: approx. 8.3 x 7.3 x 4 m Machine weight: approx. 27 t Operating Hours Operating hours: 84,857 h Automatic operation hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal cooling Approx. 300 SK 50 tool holders Codpfx Ajx Dcb Nsduerk Renishaw touch probe Filter belt system with ICS Extraction unit

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 3500 mm Measurements depth 6000 mm Crjdpfx Asxmbyveduek Measurements height 3400 mm Machine weight 7000 kg Main Drive Spindle speed range 24000 rpm Spindle motor power 10 kW Tool taper HSK 63F Number of axis 5 Movement X-Axis Movement 2900 mm Y-Axis Movement 1740 mm Z-Axis Movement 1050 mm Tools Max weight 3 kg Additional Equipment Maka protective enclosure, open at the top and with two manually opening doors at the front This 5-axis MAKA MK 7s was manufactured in 2007. It features a robust 7000 kg frame, operates on 400V/50Hz, and has a rated power of 18.5 kW. The machine includes a BWO 910 RC control system and a versatile HSK 63F milling spindle. Its linear tool magazine holds tools and saw blades, complemented by an aluminum surface table measuring 2000 x 1000 mm. Consider the opportunity to buy this MAKA MK 7s horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm This machine is part of an online auction. Images will be provided later. Crjdpfx Adjx A U Uloujk

Condition: used, Year of construction: 2008, travel distance X-axis: 1,700 mm, travel distance Y-axis: 1,400 mm, controller manufacturer: MAZAK, controller model: PC FUSION 640 M, CONTROLS Cedpfx Aexzbrbsdusrk .. CNC controls MAZAK PC FUSION 640 M WORKING RANGE -CUBIC- .. X-axis travel: 1700 mm .. Y-axis travel: 1400 mm .. Z-axis travel: 1400 mm TABLE .. - positioning/indexing: 360000 ° SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. drive power: 37 kW TOOL MAGAZINE .. number of positions: 120 AUTOMATIC WORKLOAD EQUIPMENT .. store type: pallet changer .. number of store positions: 6 .. pallet length: 1000 mm .. pallet width: 1000 mm .. number of pallets: 6 A high-quality Mazak FH 10800 is available for sale, equipped with a 6-fold pallet storage system, ideal for automated machining processes and high production output. The machine is in very good condition and is available immediately. With a large travel range, powerful spindle and extensive equipment, this horizontal machining centre is particularly suitable for demanding machining tasks in mechanical engineering or series production. NC4 laser Renishaw OMP60 probe Synchronised thread cutting Removable handwheel CNC performance package Mayfran Concep chip conveyor with drum filter 70 bar high-pressure pump

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: Cjdsxxpbxjpfx Adusrk 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, Kao Ming Radial drilling machine. Technically in very good condition. Incl. drill cube and various tools Cjdswhcnajpfx Aduerk Load 100mm. Capacity Ø50mm.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, The horizontal machining centers in the XpertK series are characterized by their outstanding modularity. Choose from a variety of table variants and matching milling heads, complemented by a wide selection of spindles. The XpertK machines are ideal for special requirements where standard machines are not sufficient and offer customized flexibility and individuality Crodpfx Adsr H Hhneusk Xpert K 3512 - Horizontal machining center - Series: Xpert K - Travel X/Y/Z: 3500 x 1200 x 1000 mm - Optional Y-axis: 1600 mm - Milling head: M-Series fork milling head - Spindle: 12,000 min-1 / 53 KW / 253 Nm - Tool holder: HSK-A100 - Control: Heidenhain TNC 640 - Clamping surface: 4,000 x 2,200 mm - Payload: 15,000 kg - Rapid traverse: 30 m/min - Acceleration: 3 m/s² Modularly expandable, further options: - Sliding table X-axis - Cross table X and W-axis - Rotary table X and C-axis (Ø 2,000 mm) - Table travel X-axis up to 6,000 mm - Table travel W-axis 1,200 mm - Movable work unit Y- (vertical), Z- (slide) and W-axis (1250 mm) - Milling and turning machining possible - 18 spindle variations - Clamping area can be extended up to 6,000 x 2,500 mm

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Main Drive Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 1626 mm X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Csdpjx All Uefx Aduerk Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Media Chip conveyor Yes Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2002, Burkhart & Weber MCX 900 – 4-Axis Machining Center - Siemens SINUMERIK 840D CNC control - Double pallet changer, pallet at loading station rotatable, total pallets: 6 - Rack-type tool magazine with 264 tool positions and tool setup station for loading during runtime - Rapid traverse X/Y/Z: 40 m/min / B-axis: 20 rpm - Max. machining force X/Y/Z: 20 kN / Tangential torque B-axis: 20,000 Nm - Renishaw wireless probing system - Year of manufacture: 2002 Technical Data Working ranges: - X-axis: 1,600 mm - Y-axis: 1,400 mm - Z-axis: 1,500 mm - B-axis: 360° / 0.001° Speeds: - Spindle speed: 20 – 6,000 rpm - Gear ranges (2): 20–1,400 / 1,401–10,000 rpm Feed rates and forces: - X/Y/Z-axis rapid traverse/feed: 40,000 mm/min / 20,000 N - B-axis speed/torque: 20 rpm / 20,000 Nm Tool magazine: - Magazine type: rack magazine - Number of tools: 264 Tools: - Max. tool weight: 60 kg - Max. tool length: 560 / 750 mm - Tool holder: DIN 69893 / HSK A-100 - Tool clamping force: 40 kN Pallets: - Pallet size: 800 x 1,000 mm - Pallet changer: double - Pallet weight: 800 kg - Max. allowable pallet weight: 3,150 kg - Pallet design: T-slots - Workpiece loading station: manually rotatable (4 x 90°) Coolant system: - Internal coolant (through tool): 30 l/min / 50 bar - External coolant: 200 l/min / 4 bar Drive power: - S1 operation 100% duty cycle: 37 kW - S6 operation 40% duty cycle: 50 kW Electrical: - Voltage: 3 x 400 V / 50 Hz +10% - Control voltage: 230 V AC / 24 V DC - Rated current: 130 A - Connected load: 65 kW / 75 kVA Hydraulics: - Tank: 240 l - Pressure: 60 bar Crsdpoxxbbwefx Aduok Pneumatics: - Pressure: 4 – 6 bar - Consumption: 10 m³/h

Condition: good (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,800 mm, 4-axis machining centre in heavy-duty design with multi-pallet changer Travels / Axes Axes travels: X 2,600 mm, Y 1,500 mm, Z 1,800 mm B-axis: 360,000 positions (continuous) Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Linear axis accuracy (VDI 3441) Positioning accuracy P: 10 µm Repeatability Ps: 5 µm “U” head (horizontal / vertical) Interface: ISO SK 50 Main spindle speed range: 37–6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool magazine Crsdpfxexwztds Aduok 208 tool stations, vertical rack magazine Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Front transpallet / pallet changer APC: 360,000 positions 4 fixed stations Rotary unit for loading and unloading of workpieces 6 pallets 1,000 x 1,250 mm Plant supervisor: CswWin CNC control CNC control: Siemens 840D Option: SL 1B Operate Remote operator panel for tool data input The machine is in excellent condition and ready for immediate operation. Includes high-grade filtration system, hydraulic unit, chip conveyor and pallet systems. Several hundred tool holders can be purchased additionally on request. The line has to be removed from the plant in January 2026 and is in principle already available before that date and ready for short-notice delivery.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Crodoxvw Iuepfx Aduok Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: used, Year of construction: 2002, x-travel 1850 mm y-travel 1250 mm z-travel 1525 mm Control 16 i- M Fanuc type of pallet-changer 2-fach size of pallet 1250 x 1000 mm tool change unit 80 fach tool taper ISO 50 0 30 kW Crsdpfx Adsxukqgousk max. workpiece weight 5000 kg turning speeds 20- 6000 U/min rotary table 360 x 1 ° feeds - automatic programming 0- 15000 mm/min rapid traverse 30 m/min total power requirement 60 KW weight of the machine ca. 27 t dimensions of the machine ca. 8,3 x 7,3 x 4 m 80 tool position ATC. We will supply 300 pieces SK50 holders along with the machine. Measuring tracer Renishaw, Cooling trough spindle and filtering arrangement, 50 bar, Chip conveyor and exhaust ventilation. Machine has worked for 28.000 spindle hours. Control: Fanuc 16i-M.

Condition: used, Year of construction: 2005, Technical details: x-travel: 2200 mm y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA weight of the machine ca.: 50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm * Csdjvgmitjpfx Aduerk

Condition: used, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller model: Fanuc 6M, spindle motor power: 15 W, Technical Specifications Manufacturer: OKK Model: MCH-800 Year: 1989 Axis Travels (X/Y/Z) X-axis: 2006 mm Y-axis: 1000 mm Z-axis: 800 mm Table & Rotary Index Table Table size: 2202 × 800 mm Rotary indexing table: 800 × 800 mm Table load capacity: - Indexing load: 1,500 kg - Flat load: 3,000 kg Spindle Speed range: 30 – 3,000 rpm Taper: BT50 Main motor power: 15 / 11 kW (20 / 15 HP equivalent) Equipment - 50-station Automatic Tool Changer (ATC) - FANUC 6M CNC control - Extremely rigid Japanese construction - Large travels and robust rotary table Weight Total machine weight: 16,500 kg Crjdpfx Adjxyzzyoujk Column: 8,500 kg Table section: 8,000 kg Description This OKK MCH-800 is a classic Japanese horizontal machining center from the era when OKK machines were engineered for maximum rigidity and long-term mechanical reliability. Featuring a BT50 spindle, generous travel dimensions, and an 800 mm rotary table, it is particularly suitable for machining steel components, heavy-duty roughing, and demanding production cycles. The Fanuc 11M control is reliable, easy to maintain, and still fully supported with spare parts.

Condition: good (used), Year of construction: 2006, operating hours: 93,050 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, controller manufacturer: Fanuc, controller model: 15i, workpiece weight (max.): 5,000 kg, table width: 1,000 mm, table length: 1,000 mm, table load: 5,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, number of spindles: 1, number of slots in tool magazine: 120, tool length: 470 mm, tool diameter: 380 mm, tool weight: 15,000 g, Equipment: chip conveyor, documentation/manual, Horizontal machining center 4 axes / 4th axis resolution 0.001mm Spindle speed 8000 rpm 2 gear stages ATC with 120 tool pockets Tool holder: MAS BT50 / pull stud Mitsui Direct measuring systems X / Y / Z / B Coolant supply: external / internal / Niagara Rigid tapping function Travel paths: X=2000mm Y=1500mm Z=1200mm Interference circle: 2000mm Scraper belt conveyor Knoll type 340 K-1 Crsdpfx Asxxt Ucedujk Filter system Knoll type SF1000/Turbo 2 Filter system footprint: 2500 x 1400 x 2400mm

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Crodpfx Adsu Dahnsuek Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 2008, Technical details: Crsdpjwi Ibujfx Adujk x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,5 x 2,8 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - storage 1 MB - Big Plus spindle - Knoll filter system - mechanical Oil dust collector - elect. hand wheel - renishaw - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis *

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 840C Main Drive Spindle speed range 6000 Tool taper SK50 Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Tools Max tool length 750 mm Cedpfexqta Nex Aduork This Burkhardt-Weber MC 80 was manufactured in 1998. It features a spindle speed of 6,000 rpm, a maximum feed rate of 25 m/min, and a tool capacity of 80 with SK50 adapters. The CNC Siemens Sinumerik 840C control system enhances its precision. Consider the opportunity to buy this Burkhardt-Weber MC 80 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2005, Technical details: x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm B-axis (table): 360° size of pallet: 1000 x 1250 mm workpiece swing dia.: 2100 mm workpiece weight: 3500 kg spindle taper ISO: 50 spindle drive motor: 37 kW spindle turning speed range: 25 - 10000 U/min feed range: 40/50 m/min rapid power traverse circular: 10 U/min total power requirement: 90 kVA weight of the machine ca.: 43 t dimensions of the machine ca.: 11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis Codevgcrkjpfx Aduork - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor *

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° Credoxvz Edepfx Aduek B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: good (used), Year of construction: 2006, operating hours: 71,682 h, functionality: fully functional, machine/vehicle number: 143, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, torque: 2,212 Nm, controller manufacturer: Fanuc, controller model: 15i, workpiece diameter (max.): 2,800 mm, workpiece weight (max.): 8,000 kg, table width: 1,500 mm, table length: 1,500 mm, table load: 8,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 30 bar, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 120, tool length: 470 mm, tool diameter: 380 mm, Equipment: chip conveyor, documentation/manual, Maximum main spindle speed: 6000 rpm 3 gear stages Drive power: 22/26 kW Maximum torque: 2,212 Nm Internal cooling + external cooling + Niagara system Tool holder: MAS BT50 - Mitsui pull stud Tool changer with 120 positions 4 axes / 4th axis with Inductosyn measuring system / Resolution 0.001 Clamping table: 1500mm x 1500mm, max. 8,000kg Travel paths: X=2400mm, Y=2000mm, Z=1500mm Measuring systems: X, Y, Z with direct linear scales Interference circle: 2,800mm Rigid tapping function Data interface: RS232C Scraper belt conveyor: Knoll type 600 K-1 Filter system: Knoll type SF1000/Turbo-2 30 bar Crjdoxxk T Nspfx Adusk Filter unit footprint: 2500 x 1400 x 2400mm

Condition: used, Year of construction: 2011, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, controller manufacturer: Fanuc, controller model: i 31A, workpiece weight (max.): 2,200 kg, table width: 800 mm, table length: 800 mm, table load: 2,200 kg, spindle nose: MAS BBT 50, CNC Control MSX-701 lV (Fanuc i 31A) Pallet table size 800 x 800 mm Number of pallets 2x Table load 2200 kg Movement X-axis 1400 mm Crsdpfx Adexnmftousk Movement Y-axis 1200 mm Movement Z-axis 1350 mm Table indexing 0,001° Spindle Taper MAS BBT 50 Spindle Speed 10 -8.000 R/min Spindle motor 37/30 kW Magazin capacity 100 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Cedpsxwmu Tjfx Adujrk

Condition: repair required (used), Year of construction: 2009, functionality: not functional, travel distance X-axis: 7,400 mm, travel distance Y-axis: 1,460 mm, travel distance Z-axis: 620 mm, 7.4 Mtr 4-Axis machining centre for sale as spares or repair. X-Axis travel 7400mm, Y-Axis travel 1460mm, Z-Axis travel 620mm, A-Axis +/- 90 deg, Electrospindle power 5.5kw. Pros: New spindle in head in last 5 years, new clipper unit in last 5 years, many new cables in last 12 months. Cons: Head doesn't move and we've been told it could be the motor but this isn't 100% guaranteed. This will be sold as seen with no guarantee. Any inspection is welcome. The perimeter soundproof cabinet IS NOT included in the sale. Crodpow Nwruofx Adusk The buyer will be responsible for the removal and transportation from our premises. Please note: Price advertised is + VAT.