Gear milling machine

1 MAI PLOIESTI MDV 2000

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Ledpfx Aoiw Dlkjf Seta Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Lodpfxslpadyj Af Ssta Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Lodportrzdefx Af Seta Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: not inspected (used), Forst RF 16 internal broaching machine -WKG 1371- Technical data: Manufacturer: Forst Type: RF 16 Max. Tractive force: 16t Max. Stroke: 1200mm Max. Cutting speed: 5,6m/min Max. Workpiece diameter: Ø 700mm Max. Tool diameter: Ø 120mm Workpiece seat: Ø 70mm Note: control valve missing Lodpfxjhu E N Do Af Seta

Condition: excellent (used), 1.- Plate size Ø 400 mm Lsdpshq Uklofx Af Ssta 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR