Condition: new, ALTENDORF F 45 EvoDrive sliding table saw with 7" touchscreen - Exhibition machine - Debsu R S Aqs Et Efnokl Including: - ALTENDORF F 45 EvoDrive sliding table saw with 7" touch screen Includes: - DIGIT L angle mitre fence, ALTENDORF Cutting to length up to 3,200 mm Includes: - CNC parallel fence, 1,300 mm, ALTENDORF Traversing speed 250 mm/sec. with dimensional correction for tilted fence profile and with tilted saw blade Including: - ALTENDORF template holder Included: - Extended cutting height, 1-sided tilting ALTENDORF Saw blade projection max. 204 mm In combination with a scoring unit the max. saw blade Ø is 500 mm, or 179 mm cutting height. Includes: - 5.5 kW (7.5 HP) motor with VARIO ALTENDORF 2,000 - 6,000 rpm Includes: - Scoring unit 2-axle, 1-sided, ALTENDORF with motorized height and side adjustment Programmable scoring blade height with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - LED lighting on ALTENDORF scoring unit Including: - Double roller carriage 3,200 mm, ALTENDORF Including: - Front support roller ALTENDORF Width 300 mm - new exhibition machine -

Condition: excellent (used), ZS85 tilting radial saw Very good condition 2 kW, tool diameter 3056 mm, Djbjwh R Eao Et Efnokl Miter range 45° - 90° - 30° Cutting height 85 mm

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: Dob Et Eswhw Ihefnekl X-axis: 3,060 mm Y-axis: 1,260 mm Z-axis: 150 mm Work table: 6 ATS workpiece supports, each with 3 vacuum suction cups 6 rear workpiece stops, program-lowered, installed in one support each 6 front workpiece stops, program-lowered, installed in one support each, positioned approximately 970 mm from the rear 2 + 2 side workpiece stops 4 lifting rails, pneumatically program-lowered, for positioning heavy workpieces Vacuum pump 90 cbm/h Machining head equipment: Drilling head BH 21 L with: 14 vertical drilling spindles, each individually accessible 2 + 2 horizontal drilling spindles in the X direction Grooving saw, diameter 120° fixed in the X direction Milling spindle 12 kW, HSK 63 F Rotation speed 1,000 - 24,000 rpm Rotation right and left C-axis 360 degrees for adapter units 18-station tool magazine Safety features: * Safety mats in front of the machine * Protective grille on the left with access door XP 600 control system with NC HOPS 4 programming software Without tools and units Optionally available: * Adapter unit with lock case for door machining * Adapter unit with pivoting milling unit * Adapter unit with saw

Year of construction: 1996, Condition: ready for operation (used), CNC Model:CMS Type:PF102 NC102-6 Serial no:PC1590 Year of manufacture:1996 Spare parts and tools included 9 cutters included Tec. info: Double table 1500x1500mm Can work alternately or together 2 vacuum pumps 6 moulding motors Djbed D D Dce Et Efnskl Stock no: 103605BXA

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Including: - HOUFEK segmenter sanding pad Dkjbou R Szmj Et Efnjl electronically controlled, for width 1,350 mm Sanding pad PS 50 E Includes NC control with 10.1" touchscreen Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -

Condition: ready for operation (used), Brand: RGA Italcava Model: SM500 Produced in Italy - For example, to mill lock cases Tech. info: Max working height: 850 mm Max stroke, manual up/down: 180 mm Manual feeder right/left Dkob Et Efsh Icahonol Pneumatic material clamp: 1 pcs. Motor: 2,2 kW (3Hp) Power: 380V, 50Hz, 3-phase Size: length: 120 cm width: 80 cm height: 190 cm weight: 200 kg

Condition: excellent (used), HOLZHER Evolution 7405 machining center -used- Processing in throughfeed, 4-sided milling possible, automatic suction cup positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, saw unit for grooving in X direction, pick-up tool changer, manual central lubrication ----- Technical data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: Campus/Hops, Main spindle motor power: 6.5 kW, Main spindle mount: HSK 63F, Drill unit motor power: 1.7 kW, Drill spindle mount: M10 fit 11mm, Number of vertical drill spindles: 9 pieces, Number of horizontal double drill spindles in X direction: 2 pieces, Number of horizontal double drill spindles in Y direction: 1 piece, Saw blade Ø of saw unit: 125 mm, Number of tools in the changer: 6 pieces, Extraction connection Ø: 2 x 120 / 1 x 140 mm, Required volume flow: 4,100 m³/h, Required static. Negative pressure: 2,500 Pa, required air speed: 30 m/s, compressed air connection: 6 - 8 bar, compressed air requirement: 300 l/min., Dkjb Et Efsu R S Itensl dimensions (LxWxH): 3,680 x 1,930 x 2,340 mm Quality information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer's specifications - ready for immediate use

Condition: good (used), Band saw Robinson Band rea saw Brand:Robinson Type:EF/T 36" Maskin no:743 Dsb Eol I Dzrot Efnjkl Powerful resaw with feeding Tekn info: Saw blade 3" Feeding speed 4 pcs Motor 15 kw 400 volt 50 Hz, 3 phase Stock no::99

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm Dkjb Et Efju R S Elsnsl - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: good (used), Reasaw Stenner Type:Stenner VHM 36 Saw line including lifting tables ,infeeding conveyor, reasaw Stenner 36,outfeeding conveyor 7m Toatal lengt approx. 12 m Tech. info: Reasaw Stenner Bandsaw wheel 36´(900mm) Saw blade width 75, 90, 100mm Fence to saw blade 250mm Feed roll to saw blade 250mm Dkjb Esqzh Nwjt Efnel Max cutting hight 400mm Motor 15 Hp, 400 volt, 50 Hz, 3 phase Hydraulic lifting table: Brand: Hymo Capacity: 4000 kg Work table size: 3500x1400 mm Hydraulic lifting table size:1200x900mm Input conveyor: Length: 4200 mm Width of roller: 500 mm Outfeed belt conveyor 8000mm Stock no:2001941BXM

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment Dsb Et Efsu R Sy Aenjkl - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit - New exhibition machine -

Condition: ready for operation (used), Brand: Rüco Tech info: Max distance between blades: 1830 mm Stroke length: 1600 mm Deb Et Efom Sghxenekl Max saw height: 70 mm Blade diameter: 350 mm With pneumatic material pressure unit Engine power of each engine: 2.2 kW Power: 50 Hz, 380V, 3-phase Stock no: 2001575BXA

Condition: used, Brand:Comil Type:CF2000 E+N Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Djbeimdx Tj Et Efnjkl Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Note:The film shown is from a simular machine

Condition: good (used), Year of construction: 2002, Brand: MABO Type: Participate Machine no: 76 Year of manufacture: 2002 - Long belt sander with electric raising/lowering of the work table, sanding shoe Tech info: Work table 2000x800mm Dkob Et Eepitqmsfnsl Sanding belt dimension 6060x150mm 2 speeds on the sanding belt Size for transport: Length: 320 cm Width: 130 cm Height: 160 cm Stock no: 2001159BXM

Condition: ready for operation (used), Brand: Morbidelli Machine no: 6062 Year of manufacture: 1986 Tech. info: Dsborigrtj Et Efnokl Number of spindles: 35 pcs Work table size: 1250x320 mm Spindle center distance: 32 mm Max distance between outer spindle centers: 1088 mm Drilling depth: 70 mm Motors: 2.2 kW, 2.2 kW, 50 Hz, 380 V, 3-phase Motor for raising and lowering: 0.37 kW Size for transport: 150x90x165 cm Weight: 710 kg Stock no: 2001865BXA

Condition: good (used), Year of construction: 1970, Brand: Friz Model: LAK Year model: 1970 Tech data: Dkoberit E Ns Et Efnol Roll width: 1300 mm Diameter roll: 170 mm Height adjustment: 0-100 mm Motor: 0.75 kW, 50 Hz, 380 V, 3-phase Size for transport: 200x80x155 cm Weight: 750 kg

Condition: ready for operation (used), Year of construction: 1984, Brand: Biesse Model: Forecon 51 Machine no: 401/83 Year model: 1984 Tech data: 1 horizontal drilling unit with 21 spindles 2 swivel drill units with 15 drill chucks each Center distance between spindles: 32mm Horizontal unit motor: 2Hk 2 vertical motors: 2Hk Spindles: 2800rpm Air pressure: 6-7 atm Djb Esriutkjt Efnekl Air consumption per cycle: 17 l Total engine power: 5.5Kw Comes with fence, see picture. Machine size: 1500x3140x1500mm Weight: approx. 590 kg Stock no: 2001355

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Djb Ejrz Irret Efnjkl Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: repair required (used), Year of construction: 1997, Brand: Casati Model: Z1000 Machine no: 9709021 Deb Et Efevw Tnkjnskl Year of manufacture: 1997

Condition: ready for operation (used), Brand: Omga Model: 600 P3S Machine no: 182734 Tech. info: Blade diameter: 350 mm Cross Cut capacity: 600 mm Cast iron arm Brake Infeeder roller conveyor: 3000 mm Outfeeder roller conveyor: 2000 mm Deb Et Ejr Nu Dusfnjkl Motor: 4 hp, 50 H, 380 V, 3-phase Stock no: 2002063

Condition: ready for operation (used), Year of construction: 1995, Brand: Levigaltecnica Model: Perfect SRRN 1100 Machine no: 1663 Year of manufacture: 1995 Tech info: Working width: 1100 mm Sanding belt width: 1130 mm Sanding belt length: 2150 mm Min/Max working thickness: 3 / 160 mm Deb Et Efevhah Senskl Minimum length of workpieces: 280 mm Work table height: 900 mm Power of 1st and 2nd motors: 12.5 - 12.5 HP Feed motor power with gear motor: 1.6 / 2.2 HP Feed speed: 18 / 16 m/sec Motor power for thickness adjustment: 0.5 kW Hardness of rubber rollers: 85 SH Diameter of rollers: 200 mm Air flow capacity: 6000 m³/h Minimum pressure of compressed air: 5 bar Motor: 24 kW, 50 Hz, 380V, 3-phase Weight: 2500 kg Stock number: 2002382BXM

Condition: used, Year of construction: 2006, Brand: Costa Model: TT1350 Serial no: A60314LL2 Year of manufacture: 2006 Stock number: 2002436BXA Technical data Working width 1350 mm Sanding belt size 1380x2620mm Power:400volt, 50 Hz, 3 phase, 32kw, 65 Amp 1. sanding unit 1 sectioned sanding shoe 2. sanding unit 2 sectioned sanding shoe 3. cleaning brush 4. airblast cleaning 5. Vacuum Deb Esv Hbagot Efnekl

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Dksboipx Aio Et Efnjl Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Condition: like new (used), Brand:Waco Type:KS300 Complete cutting line Waco with 3 electropneumatic lengtstopper in and out feeding conveyor 3+2meter Techn info: Max saw balde 400mm Dkjb Eeh Ek N Aet Efnsl Max cutting hight 70mm Motor 5,5kw, 400 volt, 50 Hz, 3 phase Electropneumatisc control of saw blade and length stopper, Stock no:2000596 Size for transport: Saw 120x105x215cm (lxwxh) Conveyors:300x80x35cm Total weightt:350 Kg

Year of construction: 2012, Condition: good (used), Brand: MC Dsbepbcaio Et Efnjkl Model: LI-2DISC Machine no: 125/12 Year: 2012 Tech data: Working width: 1090mm Dimensions of rolls: 1050x70mm Roller speed: 40-650rpm Speed: 0-13m/min Motor: 5kw, 50Hz, 400V, 3-phase Motor for rollers: 0.75Kw, 50Hz, 400V Machine dimension (lxwxh): 2200x1600x2100 Weight: 1280Kg Stock no: 2001696