Zeno knife mill wood shredder

Zeno

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, number of blades: 63, rotor width: 1,150 mm, rotational speed (max.): 1,470 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rotor width: 1,150 mm Number of rotating knives: ± 63 Screen perforation: 20 mm Opening width: 2,580 mm Opening length: 2,180 mm Stroke of hydraulic slide: 1,000 mm Oil tank capacity: 75 l MACHINE DETAILS Main motor power: 30 kW Speed: 1,470 rpm Dkodpfsz Eba Rjx Akcju Hydraulic unit power: 3.4 kW Number of axles: 1 Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,850 x 1,550 mm Unladen weight: 5,000 kg Transport packages: 2 EQUIPMENT Hydraulic slide

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Dsdpfjtmup Uox Akcoku Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: excellent (used), Catalog number: 8045 TECHNICAL DATA - inlet width: 520mm - inlet height: 220mm - shaft diameter: 650mm - shaft width: 510mm - blade length: 510mm - number of blades: 2 pcs - 2 x geared pull shaft, bottom, 4kW - 2 x geared pull shaft, top, 3kW - main motor power: 55kW - conveyor belt length: 5200mm Djdszmf Azjpfx Akcsku - conveyor belt width: 620mm, 0.12kW - machine dimensions (L/W/H): 3100x1200x1300mm - weight: approximately 4000kg ADVANTAGES – auto-reverse function with adjustable settings – with a 5200mm conveyor belt – German-made – very good condition – used shredder Net price: 88900 PLN Net price: 20674 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7794 TECHNICAL DATA - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2 pcs - automatic reversing – with adjustable settings - screen dimensions 50x50mm - toothed draw roller (bottom) 1.5kW - toothed draw roller (top) 1.5kW - main motor power 30kW - feeding table with vibratory feeder / vibratory feeder length 3900mm Dsdpfxez Nhi Ue Akcjku - vibratory feeder width 500mm, 1.5kW - receiving conveyor length 5000mm - conveyor belt width 380mm - hopper with discharge chute for chips 2500x3020x2200mm - platform 4650x750x1770mm - machine dimensions with conveyor and vibratory feeder (length/width/height) 8900x1200x2550mm - weight approximately 6000kg ADVANTAGES - automatic reversing with adjustable settings - with 3900mm vibratory feeder – with 5000mm conveyor - German production – very good condition – used shredder Net price: 88900 PLN Net price: 20674 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2020, Wilo pump IL125/145-1,5/4 No. 2120792/17w50 1,5 KW 1450 min 230/400V PN 16 Dsdporvka Ijfx Akceku

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. Dkjdpfx Akez Ikz Aecsu The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: excellent (used), CATALOGUE NUMBER 8041 TECHNICAL DATA - shaft width 240mm - shaft diameter 260mm - inlet width 250mm - inlet height 120mm - number of knives 9 pcs - automatic reversing with adjustment capability - screen dimensions 30mm - toothed pull shaft (bottom) 0.75kW - toothed pull shaft (top) 0.75kW - with belt conveyor 2060x260mm - feeder motor with belt conveyor 0.55kW - main motor 15kW - feeder dimensions (L/W/H) 2270x700x600mm - machine dimensions (L/W/H) 1550x850x700mm - weight 800kg ADVANTAGES – German production – automatic reversing with adjustment capability – with belt conveyor – very good condition – used shredder Net price: 29900 PLN Dsdpfxozkvhis Akcoku Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Slow-speed machine with walking floor Rotor width: 1 m Motor: 22 kW Djdpfx Akoyu U Speceku

Condition: good (used), Year of construction: 1994, large shredder, ideal for pallets or waste wood rotor width 1200 mm motor 30 kW Dkjdpoz D Sk Refx Akcsu with hydraulic pusher

Condition: excellent (used), Catalog number: 7268 TECHNICAL DATA - Dimensions of the loading hopper (top): length/width 1000x600mm - Dimensions of the loading hopper (bottom): length/width 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen size: 16x12mm - Blade size: 40x70mm - Number of blades: 18 pcs - Auto-reverse - Presser drawer - Pump motor: 0.75kW - Dimensions: length/width/height 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – Made in Germany – Unpainted – Very good condition – Used shredder Original photos Video of the machine in operation: Dkjdpozxhh Dsfx Akcou youtube.com/watch?v=fSKMkMPlp-8 Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Dsdpfx Aoyw Sv Ejkcsku

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,800 mm, total length: 18,000 mm, Float-sink separator for separating different types of plastics using density separation. Working width: 1,800 mm Working length: 9,000 mm Dkedezc Eklepfx Akcju Overall length: 18,000 mm 2 deflector plates at 45° Trough made of stainless steel (1.4571) Chain conveyor with plastic pushers, drive 2.2 kW 2 immersion rollers made of stainless steel (1.4571) including mechanical water level control If required, a feed hopper and a lightweight material extraction system can be included.