Condition: ready for operation (used), Brand: Bacci Model: Brevettata The outer spindles are adjustable in degrees and in height Work table size: 700x200 mm Maximum working height: 165 mm Power: 380V, 50 Hz, 3-phase Size for transport: Length: 185 cm Width: 120 cm Height: 165 cm Weight: 950 kg Deb Eeh S Irvot Efnokl Stock no: 103618BXA

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing Dsb Et Efswhp Dzsnskl of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: good (used), Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, extraction, chip blower -Manufacturer: Holzmann, mobile extraction system type ABS 2480 with connection distributor -Engine: 1.47 kW Dkeb Et Efowhbyzonjl -Fan wheel: Ø 300 x 80 mm -Base: on castors -Dimensions: 840/560/H2190 mm -Weight: 64 kg

Condition: ready for operation (used), Model: KAPRE 2500 Machine no: 463 Deboma Ayrs Et Efnjkl Edge press for solid wood stripes Heat in the plate Max width of workpiece: 50 mm Length: 2500 mm Stock no: 2001658

Year of construction: 2012, Condition: used, machine/vehicle number: A1212003-0140, Technical data: - Manufacturer Venjakob - Length 3,000 mm - Belt width 1,300 mm Dksb Etjwhn Rae Efnel - Total width 1,510 mm - Year of construction 2012 - Feed approx. 2 - 8m/min. - FU control for feed 50HZ - Frequency converter required on site - Location, in stock - Volt, Hz 400 / 50 - Motor power 0.55 kW

Condition: good (used), Year of construction: 1991, spindle moulder, spindle moulder, wood milling machine -Manufacturer: SCM, table milling machine type T 110 A with table extension Dkob Et Ejwhbthefnel -Drive: 4 kW -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/8,000/10,000 rpm -Table extension: with stops on both sides see photos -Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm -Total weight: 550 kg

Condition: ready for operation (used), Year of construction: 1972, Brand: Schmid Model: HSM Dkeb Eom Udm Tet Efnjl Machine no: 64221 Year of manufacture: 1972 Tech info: Working width: 2700 mm Length of sanding belts: 8000 mm Wheel diameter: 280 mm 2 sanding belts Motor: 11 kW, 50 Hz, 380 V, 3-phase Stock no: 2001583BXA

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm Dksb Etoumvu Us Efnel - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: good (used), spindle moulder, spindle moulder Dob Et Eewha Nbsfnskl -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Max weight on belt: 400 kg Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Dkeb Et Eov Rpxfsfnsl Stock number: 2002452BXA

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Year of manufacture: 1976 Dkjb Et Efsu Nwzcsnsl Motor: 7.5 kW, 50 Hz, 380V, 3-phase Stock number: 10316

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Dobev I Ur So Et Efnskl Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Dkjbsv Hn N Us Et Efnel Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Year of construction: 1995, Condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Size for transport: Deb Etoib H Slj Efnjkl Length: 220 cm Width: 115 cm Height: 150 cm Stock no: 2001164BXM

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Dsb Et Efomb U A Ijnskl Stock no: 2001659BXM

Year of construction: 2008, Condition: good (used), Model:Easy 2000D Serie n0:08216/02 År:2008 Spraying automat Cefla model D for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of color on edges. The endless band allows for leftover color to be recycled. The main parts of the machine: Equipment for air ventilation Dkob Eopz H Tdet Efnel Air cleaning system System for supply and distribution of paint Drive systems for guns Endless conveyor belt Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of color Techn info Easy 2000/D Control system ED-EASY2000 w/d Max work width including the edges 1300mm Max workpice thickness 70mm Air flow inlet ventilator/fan10000m3/h, 3 kw Air flow outlet ventilator/fan 2000m3/h, motor 7,5kw Feeding carpet speed 1,6-10,6m/min Airpressure holder endless belt  3bar Airpressure consumption 50Nl/min Airpressure feeding pump 6 bar Airpressure spray guns 1-4bar Holder spraygun Motor for operation of spray guns 2 kw Speed spray gun 120m/min Power:400 volt, 50 Hz, 3 phase, totalt17,1 kw, 40 A Maximun engine power 7,5 kw, 15,6 A Totalt17,1 kw Dimension:4840x3708x2900mm (lxwxh) Stock no:2001807BXM Note:In reservation for wrong technical info presented

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h Dkobsn Hx Tlj Et Efnsl F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Year of construction: 1995, Condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7251 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Dkjb Eeg Hr A Ist Efnjl Weight: 1450kg Stock No: 2000360

Condition: ready for operation (used), Brand: Bila Lifting system tawi Dob Et Esv Hyfhjfnskl Machine no: 250315-1 Stock number: 2002444BXM

Condition: ready for operation (used), Year of construction: 1987, Märke: Bacci Model: MOA Dobov T Tp Tj Et Efnjkl Machine no: 1844 Year of manufacture: 1987 Stock no: 2002478

Condition: good (used), In-feeder TP Type: TP Dkebjtt N Dps Et Efnsl Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002144BXA Note: some images in the ad may be on another equivalent machine

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Brand: Holzma Type: Optimat HPP 82/43 Machine no: 0-240-06-4258 Year 2000 Tech. info: Saw length 4300mm Saw blade overhang 95mm Motor (main)13.5kw Scoring motor 2.2kw Saw carriage feed 5-125m/min 4 infeeder tables with air cushions Power 19.5kw, 400volt, 3 phase 35 AMP Size for transport: A total of 4 parcels. 1, saw 6.5 x 1.2 h 2.0. 2, Beams and grips 5.1x1.0h1.0. Dob Et Efjtvmrfjnokl 3, Table in front 2.4x0.8 h 2.0. 4, 1 pallet sheets 1.2 x 0.8 H 1.6 Stock no: 2002183BXM

Condition: ready for operation (used), Brand: Randek Type: SP700 Machines and equipment included: Powered roller conveyor Size: 4650x1460 mm Hydraulic lifting table Size: 3470x1470 mm Feed roller conveyor to the saw Size: 4000x400 mm Cutting saw Randek Size: 1000x1700x2100 mm Out-feeder roller conveyor with length stops Size: 5600x400 mm Hydraulic press Size: 1350x1500 mm Jacking cutter Randek Size: 1000x1500 mm Length of the entire saw line approx.: 17.5 meters P.s The cut-off saw's program and motor control of the saw blade do not work. Stock no: 2002038BXM Dkob Et Efortp Htenel

Condition: ready for operation (used), In-feeder TP Deb Et Esvxuy Refnekl Type: TP Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002173BXA Note: some images in the ad may be on another equivalent machine

Condition: ready for operation (used), Brand: SCM Model: P-230-S Feeder: Mahros Dkobjtpm S Ej Et Efnol Type: Ben200 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Tech. info: Capacity: Max working width 230mm Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Size for transport: 590x210x160 cm Stock no: 2002064BXA