Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Djlnowhr Nmj E Dhzsut Storage location: Supplier

Condition: used, Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 12/1134, plate width: 2,200 mm, table width: 1,100 mm, Used, good condition, ready for use Doln Ejwig Hpj Dhzsut

Condition: used, Year of construction: 2019, Workpiece length max: 3.000 mm Workpiece thickness max: 140 mm Number of tenoning spindles: 1 Number of moulding spindles: 2 Drilling aggregate: Yes Seperate fitting groove shaft: Yes Cutting glazing beads: Yes Length of tenoning spindle: 320 mm Length of profiling spindle: 320 mm Spindle diameter: 50 mm Spindle stroke stepless: Yes Radial spindle adjustment: pneumatic Controlled length stop: electronic Atelier window: Yes Dsln Eevrltno Dhzsut Mitre difference measure adjustment: Yes Equipped for outer profiling: Yes Splinter protection for outer profiling: Down-cut spindle Workpiece return: Inclined roller conveyor Main motor power: 11 kW Tool clamping system: HSK-85S SCM T-Set: Yes Tool set for window production: IV 54, IV 64, IV 74, IV 84, Holz-Alu Feedrate max: 10 m/min Continuously variable feed: Yes Control: PC control SCM Rotaten: Yes SCM Duo aggregate: Yes Profilsplitting: Yes SCM Jolly: Yes SCM OPTIMA 1: Yes Control: SCM CONTROL 100 PC Conformity marking: CE mark

Condition: used, Functionality: fully functional, Complete nailing line Automatic block feeder and cutter Automatic block loader Dslnswhftfe E Dhzeut Nailer Turner Nailer Corner cutter Electric marker Chamferer 90° rotator Turner Stacker Output transfer

Condition: good (used), Year of construction: 2012, Functionality: fully functional, filter area: 120 m², volume flow: 18,000 m³/h, Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Dueln E Dowhlkwohzot Gear motor 2.2 kW Connection for briquette press with air recirculation

Condition: excellent (used), SCM S50 Thicknesser planing width 500 mm planing height 235 mm Manual height adjustment Feed speed 7.5 and 13 m/min Motor power 4 kW Speed 4500 rpm Condition very good Price 3500. Duoln E Dor Idi Iehzjt

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Dsln Eowhr Ezo Dhzjut

Condition: new, Year of construction: 2020, Output: 10 layers/min. Thickness min./max. 17-120mm Width min./max. 70-280mm Log length: 2.5-7.2m Fully automatic stacking machine Cross conveyor Duslowhnybon E Dhzot Drive-over separator Quality conveyor Cross-cutting Stacking machine Automatic batten placement Package conveyor

Condition: excellent (used), Edge planer for planing solid wood edgebands or other edges. Original Adler BH-556 Flush Planer Dolewcqmgjn E Dhzeut Also for flush planing resin pockets, glue overhangs, etc. Drive motor 230V, 1400 watts 16,000 rpm Planing width 56mm, also suitable for extremely wide edgebands Dual-blade spindle Connection cable with quick-change plug Extraction connection Adjustable chip removal Dual-blade handle Wood transport crate Spare blades CE mark The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "Other offers from this supplier."

Condition: new, Functionality: fully functional, MIDI MAX is the cheapest and most practical solution for dust removal, allowing you to have a large filtration area and a large collection bag. The MIDI MAX suction filter unit is a very reliable system for filtering dust and small sawdust where the quantity is not so large as to require the use of a separate container. Dusln E Dhjwfgnxjzjt

Year of construction: 2023, operating hours: 2,300 h, Condition: like new (used), Functionality: fully functional, List of plant components: 101 A-B DRY AND WET LOADING BUNKER 102 REDLER CHAIN DRYER LOADING 103 DRYER DOSING BUNKER 104 A-B-C-D-E-F BELT DRYER Deljwif Hben E Dhzout 105 REDLER CONVEYOR FOR DRYER UNLOADING 106 DRY MATERIAL CONVEYOR SCREW 107 MILL DOSING AND FEEDING BUNKER 108 MAGNETIC SEPARATOR AND IRON REMOVER 109 HAMMER MILL 110 PNEUMATIC MILL SUCTION CONVEYOR 111 VERTICAL BUCKET ELEVATOR FOR SAWDUST 112 DOUBLE SCREW MIXER 113 PRESS FEEDING SCREW 114 PELLET PRESS 115 UNLOADING SCREW PELLET PRESS 116 VERTICAL BUCKET ELEVATOR FOR COOLER FEEDING 117 COLD AIR COUNTER-FLOW COOLER 118 VERTICAL BUCKET ELEVATOR FOR SILOS FEEDING 119 PELLET ACCUMULATION SILOS 120 HORIZONTAL CYLINDRICAL PELLET SCREENING CLEANER 121 DOUBLE CHAIN BUCKET ELEVATOR FOR PELLET LIFTING AND BAG FILLING FEEDING 122 PKT FILLING MACHINE Mod FPK44 122-A SOVEMA STAMPING MACHINE 122-B ABB ROBOT PALLETIZER Mod PRC 100 123 ELECTRIC CABINET AND SYSTEM ACCESSORIES 124 BIOMASS COMBUSTION BOILER WITH POWER SUPPLY AND AUTOMATIC ASH CLEANING 125 CE SUCTION SYSTEM Mod PF JET 240-24

Condition: excellent (used), Year of construction: 2001, Ott Atlantic V/12 edge banding machine Joining unit snipping, 2 x routing, radius scraper, surface scraper Deln E Dhjtdz Tqezout Edge thickness: 0.2 - 12 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 2001 price 10000

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Dusljwhr Eusn E Dhzot

Year of construction: 2008, Condition: used, Logs 2.5-5.4 m Dsljwhnqaen E Dhzjut Diameter 8-78 cm Feed rate up to 130 m/min. 2 x HOLTEC infeed units 2 x HOLTEC singulators 2 x HOLTEC step pushers 2 x HOLTEC cross-cut saws 2 x root reducers (BZ WRP Star / Bruks) 6 x HOLTEC log runners / V-roller tables 2 x debarkers (Nicholson A8 31" and Nicholson A5 22") 2 x splinter detectors (Medetec)

Condition: excellent (used), Year of construction: 2020, Altendorf - Hebrock K36 edge bander with Airtronic, jointing, corner rounding, and two scrapers. Top-of-the-line features with multi-radius, nesting, and spraying devices, virtually fully equipped. Touchscreen interface with PLC control for easy machine operation. The machine can be quickly switched between the glue pot and Airtronic. The machine has the Airtronic option, but can also be operated with the standard glue pot without restrictions. Edge thickness roller approx. 0.5 - 3 mm Workpiece height approx. 8 - 60 mm Feed rate approx. 7 - 10 m/min (automatic reduction with corner rounding machine and Airtronik) Noise protection hood Extendable workpiece support Extraction connection 80 + 140 mm Units: Release agent spray device, top and bottom Quick-change tank with glue outlet Airtronik air heater unit up to 40 mm Top pressure, electric motor adjustment Infeed guide, manual adjustment with SIKO counter Edge thickness, manual adjustment with SIKO counter Jointing with Leitz Whispercut diaphragm cutters Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 4 rollers Antistatic coolant spray device, top and bottom Crosscut saw, integrated collection container for Edge trimming units Protective spraying device for sensitive edges Multi-radius milling unit with multi-tool diaphragm cutter, with pneumatic 3-point adjustment between R1, R2, and bevel Corner rounding unit R2, pneumatically adjustable between thin and thick edges The profile rounding unit can also be used with the shelf program, so only the straight edge is rounded and not the corners Multi-radius scraper R1 / R2, pneumatically switchable and retractable Cleaning agent spraying device, top and bottom Glue joint scraper, pneumatically retractable Buffing station, cleaning station Hood lock CE mark Operating instructions A video of the machine in operation can be sent upon request. All indexable inserts of the milling units and scrapers have been replaced or turned, the saws and diaphragm cutters (Whispercut) have been sharpened, and the buffing wheels have been replaced. The machine is therefore ready for immediate use. Only the diaphragm cutters of the radius cutter and corner rounder have not been replaced, but they are still sharp. Dujln E Dhjv Nwahszet Original paint, only minor paint damage has been repaired. The machine has approximately 5,400 operating hours (glue pot switched on), but the frequency converters for the milling units and cross-cut saw have only been switched on for approximately 3,800 operating hours. Machine dimensions approx. 5,550 x 1,200 x 1,450 mm (LxWxH), including edge plate. Weight approx. 1,700 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse ready for demonstration; see "Other offers from this supplier."

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 202129, On behalf of our client, we are offering a Fravol edge banding machine. This is a consignment sale, where the machine can be seen at our warehouse in Brno. Duelnswfgkmo E Dhzjt

Condition: excellent (used), Year of construction: 1990, Table router TS110 Dslnov Im Sws E Dhzeut Year of manufacture 1990 380 volts, 7.5 HP Milling stop with fine adjustment 4 speeds 3, 4.5, 8000 and 10,000 rpm Left-right rotation, brake Haffner 3 roller feed device 4 speeds

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Delswhr Enon E Dhzeut

Condition: excellent (used), Planer thicknesser 600 mm 2 knife shafts (wedge knife shaft) Planing width 610 mm, 2 feed speeds 7/12 m/min Planing height 200 mm 5 HP, weight approx. 1150 kg Joining guide, table length 2000 mm Aigner auxiliary stop Duslnjv Hpvvs E Dhzot

Condition: used, Year of construction: 1999, Main saw motors 18 kW each Scoring saw motors 2.2 kW each Collet opening: 130 mm Saw feed forward 5 - 125 m/min Saw feed return constant 125 m/min Cutting length rip saw: 2500 mm Cutting length cross saw: 1600 mm Collets rip saw: 4 Collets cross saw: 7 Stack height of lifting table when installed at floor level: max. 680 mm Lifting table 2500 x 1600, payload 7 tons Cross saw output 2 air cushion tables 2160 x 650 mm Intermediate table for thin panels 25/16 Main saw blade HM 450 x 4.8 x 60 Scoring saw blade HM 180 x 4.8-5.8 x 45 "Power-Loc" quick-clamping device for HS "Power-Loc" quick-clamping device for VS Dsln E Dswhr Ehehzeut Storage location: Customer

Condition: used, Year of construction: 2023, Only 466 operating hours, including cross-screw discharge and automatic magnetic separator. Drive power: 18.5 kW. Throughput: 350 - 600 kg/h. Hopper: 990 x 990 mm. Screen: 30 mm. Blades: 27. Chopper dimensions: 1050 x 1500 x 1710 mm. Chopper weight: approx. 1700 kg. Dujln E Dhowhr Amjzet Storage location: Customer.

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Duelswhrvtjn E Dhzst Storage Location: Supplier

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Dusln Eowhrvmj Dhzst

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Deln E Dhjwhrvgszout

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm Max. cutting height: 2200 mm Sawblade diameter: 300 mm Max. processing thickness: 80 mm Sawblade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 5300 x 1200 x 2900 mm Motor power: 5.5 kW Dsln Eewhrvae Dhzout Storage location: Nattheim