Condition: used, Technical details: Nodpou N Ddwofx Alfsda pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m Njdpfju N Dfhsx Alfeda - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Ndjdpfx Asu Hkfpelfea Stroke Length: 180 mm

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm Nedpfxeu Icwgs Alfoda no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressing force: 63 t, pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Ndodsfhcc Sjpfx Alfsa Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Year of construction: 1982, condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm Ndedpfxsfhtp Ss Alfea -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg

Condition: as good as new (ex-display), Year of construction: 2015, pressing force: 63 t, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm Ndedpfxoffamqo Alfea daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Njdpfx Asd Ih Nrolfjda Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: excellent (used), Compact tensioner Hekus Ndodstxhxwjpfx Alfea Base area 60 x 50 mm 4 pieces 100 mm high 3 pieces 50 mm high

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool/press tool adapter -Receptacle: Ø 40 mm Ndjdsrlppvjpfx Alfea -Bore: Ø 20 mm -Dimensions: Ø 70 x 135 mm -Weight: 2.6 kg

Condition: used, Year of construction: 1991, pressure 400 t stroke 300 mm table surface area 1200 x 700 mm ram surface 1200 x 700 mm dayligth 500 mm Ndodpstqqlcofx Alfea adjustment of stroke 300 mm return capacity 348 kN capacity of ejector 100 kN ejector stroke 100 mm control SIEMENS Simatic S 5 total power requirement 65 kW weight of the machine ca. 28 t dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m = hydr. punching and embossing press Accessories: tool changing table - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m

Condition: used, Hydraulic press, oil hydraulic press, pressing machine, pressing tool, pressing pliers -Hydraulic press: Hydraulic unit novopress type WK 9483 -Pressure: max. 150 bar / 0.45 l/min -with punch set: 1x Ø 18mm, 2x Ø 14mm, 1x Ø11 mm, 1x Ø 9mm -Operation: foot pedal Ndedeix Rchepfx Alfoa -Connection hoses: for pressing tongs or similar -Dimensions: 850/550/H1250mm -Weight: 158 kg

Condition: good (used), JDS hydraulic press Bed: 505 x 510 mm Nodpfx Aloiki Ahsfsda Dimensions: 140x140x285 cm LxWxH

Condition: used, T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm -Weight: 450 kg Ndodpfxeb Uhqio Alfja

Condition: good (used), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm Ndjdpfx Ascbqqxjlfja -1x: Longitudinal groove -Weight: 156 kg

Condition: used, T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press Ndedpfxsb Ix Nls Alfsa -Dimensions: 455/365/H40 mm mm -Bore: Ø mm -Dovetail groove: 17 mm -Weight: 45 kg

Condition: good (used), Year of construction: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min Njdjb A Hwhopfx Alfeda -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm

Condition: used, T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 3005/818/H800 mm -Height: adjustable -Plate thickness: 35 mm -Plate: with supporting ribs Ndedpfxocttyro Alfoa -7x dovetail: groove 38/48 mm -Groove length: 1820 mm -Weight: 1100 kg

Condition: good (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 660 mm, table length: 530 mm, total length: 15,850 mm, total width: 12,450 mm, total height: 23,700 mm, overall weight: 4,500 kg, ram adjustment: 80 mm, stroke adjustment: 95 mm, LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min Njdpetzwt Ujfx Alfjda - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion.

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW Ndedpfx Ajt Hwpyjlfoa weight of the machine ca. 16 t dimensions of the machine ca. m

Condition: used, Year of construction: 1987, pressure 125 t Nsdpfx Alst Hwuisfoda distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm Nodet Hw Amspfx Alfeda total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: used, Double column press - Hydraulic Manufacturer REPKON Nedpeudb Hcjfx Alfeda Model 2000/800 kN Condition used description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate Ndodpfx Alsgw Il Defea -Clamping plate: length 5020 mm -Plate thickness: 37 mm -Dimensions: 5020/500 / H255 mm -Weight: 1550 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Two-crank mechanical press with a rigid frame structure. Manufactured by: SIMPAC INC., South Korea – 2019. 3-in-1 feeder line TAE IN TECH TNCL-5042 with an unwinder. Pressing force: 300 tons. Nodjy Twk Tspfx Alfsda Maximum pressing point (R.T.P.): 6.0 mm before the lower dead center. Slider stroke: 250 mm. Working speed: 22 – 45 strokes/minute (continuously adjustable with a frequency converter). Maximum die height: 650 mm. Slider adjustment: 120 mm. Work table: 2650 x 1100 mm, thickness 200 mm. Slider: 2350 x 1000 mm. Air pressure: 5 bar. Overall dimensions (L x W x H): 3600 x 2800 x 4650 mm. Machine weight: 50,000 kg. Motor power: 37 kW. Total weight of the line: approximately 56 tons. Total power consumption of the line: approximately 55-60 kW.