Used Hydraulic single column presses 51-99t for sale (32)

Condition: used, Single-column hydraulic press with die cushion HIDROGARNE Type CF 80 Machine No. 2955, Year of manufacture 2015 First commissioned 2016 Pressing force 80 tons Slide stroke 450 mm Thrust 340 mm Installation height 650 mm Table area 800 x 550 mm Table bore Ø 55 / 30 mm Slide area 650 x 400 mm Die cushion force 25 tons (250 kN) Ejector force 25 tons (250 kN) Die cushion stroke 200 mm Die cushion area 500 x 380 mm Table height above floor 910 mm Max. hydraulic operating pressure 280 bar Hydraulic tank capacity 130 liters Advance speed in rapid traverse 110 mm/sec. Pressing speed 10 mm/sec. Return speed 160 mm/sec. Drive power 7.5 kW Power supply 400 V, 50 Hz - Operation and programming via SIEMENS touch panel - Ram stroke and press force programmable via the control system - Pressure and travel cut-off - Continuously programmable pressure hold time - Ram and die cushion equipped with direct travel measuring system - Die cushion under the table can also be used as an ejector - Table surface with holes for die cushion push rods - SICK light barrier as an anti-interference device for safety operation - Control cabinet with electrical control mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Foot switch operation only - Operating instructions and electrical diagram available - Accident prevention regulations for manual insertion work Lhslowd Sy Rshccqrjf Press footprint L x W x H 1500 x 1260 x 2640 mm Weight 3.4 tons In very good condition

Condition: used, Year of construction: 1987, pressure 63 t stroke 500 mm throat 330 mm dayligth 700 mm table surface area 680 x 620 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 430 x 430 mm table height over floor 860 mm ram surface 560 x 500 mm Lelhccowc U I Isqrehf Weight 9,0 t dimensions (WxDxH) 1,2 x 2,1 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, hydraulic drawing cushion in table, two-hand operation

Condition: new, The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notching processes. The possible force ranges from 40 to 400 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Lholhcouzlirecqrsf

Condition: new, The DCD series offers a versatile deep drawing press solution with a production capacity of up to 400 tons, which can be customized to specific customer requirements. Featuring an ejector roller on the upper table, it optimizes post-deep drawing operations for seamless product processing. The open configuration on three sides facilitates tooling assembly and disassembly, increasing operational efficiency. The C-type press within the series is designed for users working with smaller tools and offers both automatic and manual functions for flexibility and ease of use. Designed with innovation and customer satisfaction in mind, the DCD series meets unique project requirements and offers advanced solutions that improve efficiency, speed, and precision in deep drawing processes. DCD Press Features 9" Screen Linear Front and Rear Covers Auxiliary Cylinder Interior Lighting Non-Through Holes (Optional) Rexroth Hydraulic System Siemens Electrical System Lhjlhccewav N Ueqrof Standard Features Chrome-Plated Cylinder Welded Steel Frame HMI Touch Screen Panel Safety Cover and Light Barrier Two-Hand Pushbutton Control Adjustable Variable Pressure and Speeds via the HMI Touch Screen Panel Adjustable Stroke via the HMI Touch Screen Panel Pressure Gauge Contamination Switch Air Cooling T-Slot Table User Manual Optional Features Hydraulic Ejector Cylinder Quick-Change Die Tool Anti-Vibration Pads Rod Pins

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter Lolhefuangeccqrjhf PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: used, Year of construction: 1978, pressure 63 t throat 280 mm stroke 160 mm table surface area 560 x 500 mm Lhelhohbalnjccqrjf ram surface 280 x 280 mm dayligth 400 mm oil volume ca. 360 l total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation Lhelhcov Tp D Tjcqref - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: used, Year of construction: 1979, pressure 63 t stroke 200 mm throat 320 mm dayligth 450 mm table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm Lhslhcsvzxrcocqrjf ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, The HPK A series is a series of hydraulic presses with a C-shaped design for deep drawing, forming, and notching processes. These machines are manufactured in Europe, and all components and parts meet extremely strict quality requirements. The possible force ranges from 40 to 300 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Lhjlhevq Nkhjccqref

Condition: new, Year of construction: 2025, throat depth: 300 mm, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height above floor: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables Ljlhjvzkupoccqrehf - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 80 PRESSURE (TONE) 80 STROKE (MM) 600 THROAT DEPTH (MM) 300 TABLE – RAM DISTANCE (MM) 700 TABLE DIMENSION (MM) 600X800 PRESS DEPTH (MM) 1300 PRESS WIDTH (MM) 650 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2600 MAIN CYLINDER DIAMETER (MM) 200 ENGINE POWER (KW) 15 WEIGHT (KG) 6500 COUNTRY OF ORIGIN: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: new, Sheet metal forms Sheet metal forms Lhelhcjfuam Ujcqref Deep drawing moulds Hot aluminium & steel forging Automotive and spare parts Food packaging industry Electrical panels Industrial cooling white goods Construction & building Hair metal cutting dies Product Info: No pit required Steel construction body C-Channel home plate & ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: used, Year of construction: 2001, pressure 80 t stroke 200 mm Lslhcovx Hq Ujcqrehf

Condition: new, Year of construction: 2024, Functionality: fully functional, The Garnet 5X machining center is a high-precision tool with 5-axis machining capabilities that allows parts to be machined with high quality and efficiency. Ideal for machine shops looking for an advanced solution for machining complex parts. It is used to perform milling operations, opening drainage channels, drilling, marking and cross-cutting on profiles. Lholhcstq Uytecqrjf

Condition: used, Year of construction: 1991, pressure 63 t throat 325 mm stroke 560 mm dayligth 700 mm table surface area 640 x 640 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 450 x 450 mm Ljljvuuacshccqrshf table height over floor 800 mm ram surface 560 x 560 mm oil volume 450 l total power requirement 15,0 kW weight of the machine ca. 7,0 t required space 1,2 x 2,0 x 3,1 m year of manufacture 1971 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse

Condition: new, Year of construction: 2025, throat depth: 250 mm, pressing force: 60 t, table width: 600 mm, table length: 800 mm, table height above floor: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes Lolhevzktljccqrehf - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 60 PRESSURE (TONE) 60 STROKE (MM) 500 THROAT DEPTH (MM) 250 TABLE – RAM DISTANCE (MM) 600 TABLE DIMENSION (MM) 600X800 PRESS DEPTH (MM) 1150 PRESS WIDTH (MM) 500 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2500 MAIN CYLINDER DIAMETER (MM) 175 ENGINE POWER (KW) 7.5 WEIGHT (KG) 5500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: new, Sheet metal cutting dies Lelhccofuam Rjqrehf Sheet metal cutting dies Sheet metal forming moulds Hot forged brass Deep drawing moulds Cold forged aluminium steel Automotive and spare parts White goods Industrial kitchen parts Industrial cooling parts Kitchen appliances Construction & building Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Year of construction: 2024, Functionality: fully functional, Profile machining center with CNC numerical control system, 4 axis that offers a wide range of solutions to its users by processing aluminum profiles of different sizes thanks to the spindle that can work at any angle between -90 / +90. Lhelotq Utmehccqref It has been developed to perform special operations, on different profiles outside the standard ones, while simultaneously performing milling, dewatering, drilling, marking and notching operations on the profiles. It has high processing capacity 300 mm x 250 mm.

Condition: used, Year of construction: 2004, pressure 63 t Lolhcevut H Ijcqrohf stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Lolhccqsfuancsrshf Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Year of construction: 2024, Functionality: fully functional, PRODUCT DETAILS Hydro-pneumatic movement Automatic return to the starting point of the operation. Centering system to ensure that the profiles are correctly seated at 45° mitre. Pneumatic clamps Pneumatic cutter change system. Leljtq Twrohccqrjhf

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW Lholhccqsvut Ederef weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request

Year of construction: 2002, Condition: used, Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Lhjlhsf A R Adsccqref Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: new, Year of construction: 2024, Functionality: fully functional, PRODUCT DETAILS Lholjtp Unhohccqrof Dewatering machine with 3 motors. Motor selection according to the control panel. Independent motors for milling function. Safety clamping button for cutting operations. 5 mm milling cutters (3 units).

Year of construction: 2002, Condition: good (used), Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Ljlhccqon Tnv Ejrshf Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: new, Year of construction: 2024, Functionality: fully functional, PRODUCT DETAILS - Automatic screw feeding. - Automatic end of screwing cycle. - Safety switch to avoid accidental use. Lhjlhcstp Umvscqref - Automatic clamping of the profile during screwing. - Average screwing speed: 1.7 sec/piece. - Automatic screwing with pressure clutch - Foot control for error-free screwdriving - Switch for special screw height adjustment - Profile reclining distance with adjustable support - Torque adjustment according to the screw