Used eccentric presses single column 0-24t for sale (42)

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 27900 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Giodoyrhpvjpfx Adnop Operating manual with CE declaration of conformity

Condition: used, Single column eccentric press MÜLLER GEFREES type PDET 5 S/EK Machine No. Year of construction 1988 pressure force 5 ton. throat 125 mm head clearance 170 mm table area 280 x 220 mm waste hole Ø 90mm ram surface 160 x 100 mm stroke adjustment 4 to 40 mm ram adjustment 30 mm Installation height largest stroke top max. 210 mm Stroke rate 200 strokes/min. Clamping spigot bore Ø 25 mm Table height above floor 900 mm motor power 0,55 kW mains connection 380 volt, 50 Hz - pneumatic clutch-brake combination - electric foot switch - switch cabinet at the machine Gisdoik Srwepfx Adnjp space requirement L x W x H 900 x 600 x 1700 mm weight 530 kg very good condition

Condition: good (used), functionality: fully functional, Offered is a knee lever press/foot press including a set of calibration tools. The machine was used in the manufacture of wedding rings. The calibration tools have European ring sizes from 82-39. The press and the tools are used, but in fairly good condition. The press weighs approx. 150 kg. Giedpfx Adjvy Dutjnjp

Condition: ready for operation (used), Eccentric press, Eisenwerk Hensel EBU 15, Used machine Manufacturer: Eisenwerk Hensel Model: EBU 15 Dimensions: Width: 800 mm Depth: 1100 mm Height: 1800 mm Godpfx Asxfk Adedneip Pressing force: 15 tons Stroke length: 4–70 mm Strokes per minute: 140 spm Table size: approx. 430 × 395 mm T-slot size: 165 × 160 mm Table height from floor: 560–735 mm adjustable Power consumption / motor: 1.0–1.2 kW Weight: 0.9 tons

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Gijdpfx Ajyc R Uijdnep Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, table width: 300 mm, table length: 400 mm, pressing force: 15 t, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Gisdpfx Aeyc R Nmsdnjp Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 28800 € 550.08 € 20 to 1.7 mm 360 mm 550 mm 140 mm 1 - 50 mm 160 1/min 4 40 mm 35 mm 200 mm 240 mm 2.2 kW 1360 mm 1100 mm 1860 mm 1250 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers mechanical overload protection Gisdewiry Uopfx Adnsp two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules INCL. OPTIONAL INVERTER FOR CONINOUS SPEED SELECTION OPTION: Vibration pads € 132,--

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other Gsdpfevnrhwjx Adnjip • Rotating wedge coupling • Foot release • Control and protective screen as new, only used very little • Without table

Condition: excellent (used), Sell well preserved Helmerding eccentric press Gisdefdnw Hspfx Adnop Very little used!

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg Giodpfji Agynox Adnop

Condition: ready for operation (used), Year of construction: 1999, Mios press T20 in a very good condition. Gijdeyh Hyiopfx Adnop

Condition: used, Year of construction: 1975, functionality: fully functional, Eccentric press, 5 ton eccentric press, for sale in excellent condition Gijdpfx Ajuf Av Usdnsp pressing force: 5 tons table size: 260x210 mm stroke length: 130 mm 3kW, 400V 50Hz

Condition: excellent (used), Pressure: 10 tons Table size: 500x280 mm Gijdpfx Asmnnqkjdnsp Stroke length: 155 mm

Condition: good (used), Year of construction: 1970, Data : Power 6 tons Stroke rate 220 / min Stroke adjustment 6 - 60 mm Projection approx. 120 mm Installation height without clamping plate approx. mm Table approx. 400 x 200 mm Godpsycr Idjfx Adnjip Weight approx. 0.3 tons Motor 0.7 HP

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm Gsdpfx Ajvfhqijdnoip hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm Godpfx Aevfhqvednjip table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Year of construction: 1962, condition: used, pressure 10 t throat 170 mm stroke 6-60 mm no. of strokes 160 Hub/min Gsdpfelp U Nbex Adnoip ram - range of adjustment 40 mm table surface area 420x320 mm ram surface 180x140 mm hole in the table Ø 120 mm table height 850 mm tool hole in ram Ø 32 mm weight of the machine ca. 1 t dimensions of the machine ca. 1200x1200x1900 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm Gsdpfx Ajvfhp Esdneip table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Year of construction: 2023, condition: new, pressure 20 t throat 155 mm Gijdpfjp Ududox Adnep stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm Gijdpfjvfhq Ajx Adnsp table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min Gsdpfx Aovfhp Sjdnjip ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 5239, We are selling an eccentric press BMW TP3, year of manufacture 1954, last DGUV inspection 02/2023, fully operational. Gsdsx Uxfhspfx Adnoip

Condition: good (used), Year of construction: 1995, For sale Eccentric press PSM 40 T Giodpfx Asv Uxt Hjdnjp The price given in the advertisement is a net price to which VAT should be added

Condition: used, functionality: fully functional, machine/vehicle number: 5081, overall weight: 134 kg, DGUV certified until: 02/2023, pressing force: 3 t, We are selling an eccentric press BMW TP3, year of manufacture unknown, last DGUV inspection 02/2023, fully operational. Gjdpfexvqa Rsx Adnsip

Condition: used, functionality: fully functional, DGUV certified until: 02/2022, Eccentric press Künstner & Hampel, used. The machine is fully functional; however, the ram rod has been welded (see photo). Giedpfx Adexv R Uhensp