Used Forging presses for sale (23)

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Bcn0Uwmeum Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm Dq3Irj no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer with pneumatic drive can only be offered without putting into operation in our warehouse video at seller's site before dismantling available

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Dpm0Fp Throat: 375 mm Ram diameter: 180 mm Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Sqatl9Fcy Machine is disassembled Technical data on request

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 212001A110, pressing force: 2,500 t, Nominal force: 2500 tons Push bushings: 700 mm Installation height max.: 1600 mm Table size: 1300×1500 Table height: 467 mm Drd3Ur Left column width: 1470 mm

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, overall weight: 8,000 kg, SPECIFICATION MODEL CBF-103L(2018) B7Vkdqasyk NO.OF FORGING STATION 3 PORGING LOAD(KG) 8000 MAX.CUT-OFF DIA.(MM) Ø12 MAX.CUT-OFF LENGTH(MM) 192 MAX.OUT.PUT.(PCS/MIN) 140 P.K.O. STROKE(MM) 15 K.O. STROKE(MM) 162 MAIN ENGINE (HP) 30 CUT-OFF DIE DIA.(MM) Ø45*59L PUNDH DIA.(MM) Ø53*200L MAIN DIE DIA.(MM) Ø75*200L MACHINE WT.(KG) 19000 NORMAL SIZE OF BOLT(MM) 6-10 SHANK LENGTH OF BLANK(MM) 30-152

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, 5 AXES, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, OVERALL DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Dq89Uf

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Drblub Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Press Specifications: Quantity: 1 Type: 150-08G Force: 135 T Stroke: 250 mm HOF Adjustment: 152 mm Strokes per minute: 60 Table Dimensions: 1270 × 760 mm Drarap

Condition: used, Year of construction: 2016, total height: 6,100 mm, pressing force: 800 t, table length: 1,300 mm, table width: 1,300 mm, overall weight: 55,000 kg, ram stroke: 700 mm, power: 400 kW (543.85 HP), lifting height: 700 mm, worktable length: 1,300 mm, distance table to ram: 1,200 mm, PRESS DESIGN .. drive system: hydraulic .. openings in uprights: yes .. number of suspensions: 1 .. number of slide actions: 1 .. slide ejectors / cushion: yes .. opening in table: no PRESS FORCES .. total force (nominal): 800 to PRESS TABLE .. table surface (left-right): 1300 mm .. table surface (front-back): 1300 mm SLIDE .. stroke: 700 mm SLIDE EJECTOR / CUSHION .. nominal force: 5 to .. stroke: 20 mm TOOL ASSEMBLY DIMENSIONS .. distance table - slide max.: 1200 mm .. distance between columns (H-frame): 1325 mm ELECTRICAL SPECIFICATIONS Usjybx9Ylz .. total power consumption: 400 kW DIMENSIONS / WEIGHTS .. total height: 6100 mm .. total weight approx.: 55000 kg ATTACHMENTS (PRESSES) .. press automation: yes .. acc. to actual accident protection regulation: yes .. European CE standards: yes Isothermal forging is a type of forging process that involves shaping a material while maintaining its temperature at a constant level throughout the forging process. The key advantage of isothermal forging is that it allows the production of complex, high-precision parts that would be difficult or impossible to create using other forging methods. The constant temperature also helps to prevent defects such as cracking, which can occur when a material is cooled too quickly after being shaped. Isothermal forging is commonly used in the production of components for high-performance applications such as aerospace, automotive engineering and orthopedic implants, where the strength, durability, and precision of the parts are crucial. It can be used with a wide range of materials, including steel, titanium, and aluminum alloys, among others. The isothermal forging cell essentially consists of the following components: - Forging press Siempelkamp 800 to from year of construction 2016 - Attachments for cell enclosure (charging and cleaning side) - Inductive die heating (upper and lower die) - Rotary hearth furnace FK DH11/13E from year of construction 2016, 54 KW, max. temp. 1300 °C for titanium and nickel alloys - Universal charging manipulator with max. handling weight 8 kg - Inductive die heating ITG ITPA 2k80+80 From year of construction 2015, 200 kVA - Technical equipment for controlled purging of the enclosure with nitrogen and for controlled ventilation of the enclosure with atmospheric air - Oxygen measuring equipment - Feed lock DN 500 for max. component dimensions 350 x 250 x 100 mm - Furnace airlock - Set-up doors on the operator side of the press cell - Hydraulics with max. operating pressure 320 bar, power consumption 35 kW - Electrical system

Condition: used, Pressure total: 800 ton Stroke: 400 mm Slide adjustment: 160 mm Shut height (stroke down, adjustment up): 800 mm Table surface area : 1000 x 1000 mm Slide area: 1000 x 1000 mm Number of strokes: 18 s.p.m. Distance between the guardrails: 850 mm Free frontal opening L-R: 1050 mm Ejector in table: 100 ton Lower ejector stroke: 400 mm Required power: 132 kW Standard configuration Machine was overhauled in 2017 / 2018 Upytq29Der

Condition: good (used), Year of construction: 2019, In good technical condition and fully functional. Year of construction 2019. Bois99Fn0Ye Press weight without tools and aids 23,000 kg. Nominal force 2500 kN. Number of strokes in continuous operation per minute. with variable speed and minimum and maximum number - 20 strokes.min Minimum and maximum stroke length 250 mm.

Condition: good (used), Functionality: fully functional, BEYELER HYDRAULIC BENDING MACHINE 3000X100 TON. MOTORIZED REGISTER, 3 AXES. RECESS 250. DIMENSIONS: 350X160X245 cm (H), WEIGHT 6,500 KG (65 QL.) Bjoi8Im7U0

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die Dpr0Gx - Various spare parts

Condition: repair required (used), Year of construction: 1981, Functionality: limited functionality, machine/vehicle number: ST-42/421-45/2390, overall weight: 35,000 kg, Hot press for forming screws. The device has been out of service for several years due to failure to meet the technical parameters of the products. Made as one of three in the application of pilot technical solutions to improve the production process. Approx. 3 years "dry" commissioning trials were carried out. The trial demonstrated problems of operation as well as functionality. Device considered without peripheral devices. Fabryka Elementów Złącznych S.A. located at 14 Fabryczna Street 41-100 Siemianowice Śląskie NIP: 643 000 00 23 REGON: 000028346 KRS 0000097998 has the machines specified below for sale. Deadline for submission of offers until 22.11.2024r. Offers should be sent to the e-mail address. Bik83Jez Machines can be viewed by appointment by phone

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Dqm02P Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: good (used), Year of construction: 1985, The steel forging hammer in the ad is for sale. Effect of Blow (mkg) : 13000 Total Stroke of Tup : 1100 mm Dqlezp Max Number of Blows :80 per minute Air consumption per blow of sucked air at heaviest blow (cold air) : 2.25 m³ Required compressor output of sucked air perm in : 18 m³/min (cold air) and 12 m³/min (160 ° hot air) Volume of air chamber : 16 m³ Steam consumption per blow at heaviest blaw (satured steam) : 1,15 Kg Consumption steam perm in (saturated stem) : 9,2 Kg Distance between guides : 800 mm Max length of guides : 1600 mm Min overall height of swages without edges : 400 mm Height above floor : 4600 mm Total weight with steel plate standards : 65.000 Kg

Condition: good (used), Year of construction: 1973, Functionality: fully functional, total height: 3,760 mm, pressing force: 1,250 t, total length: 6,400 mm, total width: 4,365 mm, table length: 820 mm, operating pressure: 7 bar, table width: 260 mm, throat depth: 700 mm, overall weight: 135,000 kg, pressure: 7 bar, ram stroke: 220 mm, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Dpnndx Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Total weight, circa: 135 000 kg.

Condition: used, HYDRAULIC FOLDING MACHINE 5000 X 100 ton, INCAVO 400. FOOTPRINT: 555X220X290 (H), WEIGHT 15,100 KG (151 QL.) Fk7Aann

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] Cyya3Trgos - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: used, Year of construction: 1965, machine/vehicle number: ST-42/420-31/659, overall weight: 35,000 kg, 3 years back the commissioning was done, the electrics are in working order, helions replaced. (The device treated without peripherals). The technical condition as of the date of inspection and after obtaining additional information was determined as satisfactory. The device requires maintenance. Fabryka Elementów Złącznych S.A. located at 14 Fabryczna Street 41-100 Siemianowice Śląskie NIP: 643 000 00 23 REGON: 000028346 KRS 0000097998 has the machines specified below for sale. Bsa02Z3Vxmk Deadline for submission of offers until 22.11.2024r. Offers should be sent to the e-mail address The machines can be viewed after prior appointment by phone

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] Dpr0Gn EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] Cyx98Z2T8I - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo