Used hydraulic single column presses over 125t for sale (36)

Condition: reconditioned (used), NR.01 Hydraulic press with 3 cylinders BIGNOZZI Power 200 Ton Prsdpjhnc R Isfx Af Sof Completamete reconditioned Table 1550 x 1050 mm Recess mm 1000 Piston stroke mm 500 Platen height 1180 Dimensions 2900 x 1700 x 2900 ( h) Weight Ton 10

Condition: good (used), functionality: fully functional, throat depth: 500 mm, pressing force: 160 t, table width: 1,250 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Pedpfx Afjx Nxrws Sorf Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools .

Condition: new, neu ca. 4 Monate ab Auftragse Italien 117000 € 2211.3 € 125 to 500 mm 800 x 400 mm 900 x 600 mm 600 mm 300 mm 115 mm/s 42 mm/s 7 mm/s 70 mm/s Prjdpfx Aewirbrjf Sef 15 kW 1400 mm 1950 mm 2600 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm Pjdpfxev Rgwxj Af Serf clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: new, Year of construction: 2025, functionality: fully functional, 125 T C-Frame Servo Press with 50 T Ejector, DUPLOMATIC Hydraulics Reduced power consumption by up to 40% compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Press capacity: 20–125 T (adjustable) - Maximum installation height: 1000 mm - Usable table surface: 2200 x 750 mm - Usable ram surface: 980 x 750 mm - Ejector cylinder capacity: 50 T - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pieces, in corners) - Table height from floor: 870 mm - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm - Approx. total weight: 8,700 kg - Clamping device for die centering: 50 mm diameter - Prepared for vibration dampening plates: 30 mm - Prepared for ROBO connection: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. operating pressure: 245 bar - Return speed: 300 mm/sec - Ram speed under load up to 25%: 25 mm/sec - Ram speed under load up to 50%: 14 mm/sec - Ram speed under load up to 80%: 7 mm/sec - Ram speed under load up to 100%: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC POWER UNIT: - SERVO hydraulic pump (brand: DUPLOMATIC): 143 L/min (1 piece) - SERVO motor power: 15 kW (1 piece) Prsdpfx Asx Aqtqof Sof - Pressure accuracy during pressing stroke: +/- 5 bar - Pre-fill valve: NG-160

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Prsdpsd Ab Iljfx Af Sjf

Condition: excellent (used), Year of construction: 1984, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, type of input current: three-phase, stroke length: 500 mm, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Pjdpoqy E I Rsfx Af Sjrf

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t Podjwvva Sopfx Af Sjrf dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 104800 € 1980.72 € 150 to 500 mm 950 x 650 mm 1200 x 750 mm 750 mm 100 mm/s 5,5 mm/s 165 mm/s 11 kW 2200 mm 2200 mm 3650 mm 9500 kg 254 bar 32 to 200 mm 120 mm 160 bar 40 mm/sec. 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots Pjdpfx Afowirl Ro Ssrf according to "CE" rules

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale Predpfx Afsig Hzkj Sjf The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: used, Technical specifications: Max bending length: 4,100 mm Bending force: 400 Ton Prjdpfoxw T Sfox Af Sef Maximum operating pressure: 300 Bar Approximate weight: 24,000 kg Minimum distance between photocell barriers and tools: 180 mm Motor power: 30 kW CNC control: Esa Machine compliant with CE standards.

Condition: new, More technical data on request ht curtain Prodpfxjd Ab Igj Af Ssf manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to CE rules press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:8.200 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, total height: 3,700 mm, total width: 1,250 mm, total length: 2,200 mm, throat depth: 800 mm, pressing force: 250 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 8,000 kg, reverse speed: 110 mm/s, ram plate width: 750 mm, ram plate length: 450 mm, stroke length: 500 mm, oil tank capacity: 500 l, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Prsdpfjvcb Tlox Af Ssf

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation Predpfx Afevzxphe Sof

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 86300 € 1631.07 € 150 to 300 mm 950x650 mm 1200x750 mm 550 mm Pedpfx Aswiq Tyef Sjrf 100 mm/s 5,5 mm/s 165 mm/s 11 kW 2200 mm 2200 mm 3250 mm 8200 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules

Year of construction: 2003, condition: excellent (used), Used Loire 2000ton hydraulic H frame press for sale Table dimensions ( x-y/mm) : 5000×2500 Slide dimensions ( x-y/mm) :5000×2500 Stroke ( x/mm) : 1700 Light at tdc ( x/mm) :2700 Lateral window ( x/mm) : 2900 Cushion in the slide (x/mm) : 3400×1900 Stroke of the cushion in the slide (x/mm) :150 Predpen Sma Hsfx Af Sof Cushion stroke ( x/mm) : 400 Cushion power ( ton) : 600 Lateral moving bloster Brand Loire Power 2000 Ton Table dimensions X-Y 5000 x 2500 Slide dimensions (x-y) 5000×2500 Stroke 1700 Light at tdc 2700 Shut eight 1000 Lateral window Lateral window dimensions (x-y/mm) 2900 Internal slide Dimensions X-Y 3400×1900 Stroke 150 Work speed to 100% 22 mm/sec Strokes/min 37 mm/sec Strokes/min 400 mm/sec Strokes/min 350 mm/sec Cushion Power 600 Ton Stroke 400 mm Cushion table dimensions (x-y) 37001900 Accessories Accessories lateral moving bolster Overall dimensions Weight 310 Front 6250 Deep 5000 Height 9650 Conditions Machine conditions Working Electric plant conditions Working Year 2003 New hydraulic H frame press for sale complete with warranty

Condition: like new (used), 2 column hydraulic press Prsdpfx Aeghl N Uof Sef Press force: 200 t upper stroke: 500 mm lower stroke: 200 mm overall dimension: 1800x2200x3700 mm Power: 10 PS Weight: 8.4 t

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) Predpfx Afsmr Hpcj Sef 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Prsdpfx Afjd Swtao Sjf Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: STHP 80KN, total height: 1,320 mm, total width: 510 mm, total length: 200 mm, pressing force: 8 t, table width: 300 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Podpst Rhb Ijfx Af Serf Bmcbfntr with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: like new (used), Year of construction: 2014, 4 meter width Prjdpfxslqwvkj Af Sjf Nominal pressure 1250 kN CNC Back Gauge Quick Change Tooling

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Podsd Ih Nrjpfx Af Sorf Operating instructions and electrical plans available.

Condition: like new (used), functionality: fully functional, total height: 3,500 mm, total width: 2,400 mm, total length: 1,000 mm, throat depth: 500 mm, pressing force: 300 t, table width: 1,000 mm, table length: 700 mm, operating speed: 14 mm/s, overall weight: 13,500 kg, reverse speed: 265 mm/s, working height: 1,100 mm, working range: 800 mm, pressure: 290 bar, Equipment: documentation/manual, safety light barrier, Power 300 TN Motor power 30 kW Throat depth 500 mm Working speed variable 14.9 to 9 mm/s Approach speed 178 mm/s Return speed 265 mm/s Maximum pressure 290 bar Stroke of piston 500 mm Lower table size 1,000 x 700 mm Upper table size 800 x 600 mm Max. vertical clearance 800 mm Working height 1,100 mm Pedpfxjwpf S Ds Af Serf Total front 10,000 mm Total side approx. 2,400 mm Total height approx. 3,500 mm Weight approx. 13,500 kg.

Condition: like new (used), functionality: fully functional, pressing force: 400 t, table width: 2,000 mm, table length: 1,000 mm, operating speed: 106 mm/s, reverse speed: 125 mm/s, stroke length: 750 mm, pressing speed: 12 mm/s, Equipment: safety light barrier, HYDRAULIC C-FRAME PRESS FOR RAILWAY RAIL STRAIGHTENING We are offering a new/replica version of this press. The press will be placed on sale by the customer in the second or third quarter of 2026 due to the project's extension. The CF-400E/NC hydraulic press belongs to the CF/NC series and was specifically designed for railway rail straightening. Equipped with an upper and lower table made of machined C45E steel with DIN 650 grooves. It uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements according to CE regulations. TECHNICAL DATA Press force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Push plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Prjdswkv A Nopfx Af Sef Weight kg 39,500 STRUCTURE AND TABLE: • The gooseneck structure is electro-welded and made entirely of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The upper table ensures perfect alignment with four 80 mm diameter lateral cylindrical guides equipped with maintenance-free bimetallic bushings. CYLINDERS AND HYDRAULIC GROUP • Single-acting main cylinder with jacketed barrel, chrome-plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with chrome-plated pistons and wear-resistant guides, enabling fast start-up and return speeds. • Includes two independent hydraulic safety blocks. • Motorized hydraulic group with pre-fill valve for forward and reverse flow. Constant power, variable flow pump. • Equipped with a directional control valve, a pressure relief valve, a decompression valve, and an air-oil cooling system. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 CONFORT, located in the control cabinet. It allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. It has a memory capacity of 300 recipes, with each recipe capable of programming all previous values. • Electrical and hydraulic maneuvers are redundant and self-controlled. It includes an additional safety block and self-checking devices for maneuvers and safety. It includes verification and certification of correct operation and the safety distance for photocells. • Operation is via a low-voltage electric pedal. • For safety, lasers and work area protection with Category IV photoelectric barriers are integrated.

Condition: like new (used), functionality: fully functional, total height: 3,250 mm, total width: 3,650 mm, total length: 6,000 mm, pressing force: 400 t, table width: 2,520 mm, table length: 6,000 mm, operating speed: 3 mm/s, overall weight: 28,500 kg, reverse speed: 18 mm/s, pressure: 319 bar, power: 11 kW (14.96 HP), The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Approach Speed mm/s 10 Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. Prsdswpgmvspfx Af Sef • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device.