Used automatic punching machines for sale (154)

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm no. of strokes 60-300 Hub/min Dodpfx Abewz Rv Es Djup table surface area 730x750 mm weight of the machine ca. 14 t

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Duodpfeudn Utsx Ab Dep Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm Dsdpfx Abjhlnzkj Dsup weight of the press approx. 11 ton.

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Djdpeyrf Aaefx Ab Dsup Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: used, Year of construction: 1989, pressure 20 t total power requirement 20 kW weight of the machine ca. 5 t Dedpfjvr Hkzex Ab Djup

Condition: like new (used), Year of construction: 2000, operating hours: 17,600 h, Manufacturer YAMADA DOBY Model NXT-60 Year 2000 Condition Used Stock No.0329 Thrust: 60 ton. Slide stroke 15-50 mm Dsdpfx Aerubcbsb Deup Strokes per min No. 800 Slide adjustment 50 mm Mold clearance at min 303 mm Mold table size 950 X 650 mm Slide size 950 x 420 mm Side passage in the shoulder 260 mm Main motor power 22 kw

Condition: excellent (used), Year of construction: 2001, Manufacturer YAMADA DOBY Model Alfa-45H Year 2001 Condition Used Warehouse number 0357 Structure Double column Dsdpfjwiifusx Ab Djup Used press Thrust: 45 tons Thrust points n° 2 Slide stroke 30 mm. Number of strokes/min 150 -1000 Slide adjustment 50 mm. Mold light at BDC 260 mm. Mold holder plate size 700 x 500 mm. Slide size 700 x 360 mm. Lateral passage in the shoulder 220 mm. Main motor power 15 kw

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Dujdpfsxz Ugxjx Ab Dop Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: used, Year of construction: 1990, pressure 32 t Dodpeylzynjfx Ab Djup distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm Dujdpfx Abjylzw He Dsp column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min Djdpfx Aewc U Nljb Deup distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) Dedpfx Abovuk E Uj Dsup as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm Djdpfx Abjvut Ixs Dsup ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm SPECIAL DEAL as is where is, WITHOUT putting into operation / WITHOUT additional work Duedpfeylck Isx Ab Dep free loaded to truck

Condition: excellent (used), Year of construction: 1995, Press force: 320 kN Stroke frequency: 1,100/min Ram stroke: 3–50 mm Ram adjustment: 50 mm Drive power: 19 kW Table length: 760 mm Including soundproof cabin Including control cabinet Including BANDMOTION servo feed Including KEYENCE camera monitoring Including decoiler The machine is in very good condition and immediately available Dedexcmkfspfx Ab Doup

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press PK No. 630 Duedpfx Abewab T Eo Dep

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Djdpfx Absyidnyo Djup Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Table size: 830 × 700 mm Bolster plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed height over table: 120 mm Ram area: 500 × 400 mm Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.

Condition: reconditioned (used), Year of construction: 1986, operating hours: 53,590 h, functionality: fully functional, pressing force: 110 t, stroke length: 16 mm, BSTA 110H, with BBV 202 /120, fixed stroke 16mm Djdouwlvqepfx Ab Doup machine checked. CE-conversion possible. Contact us !

Condition: reconditioned (used), BSTA 110H, with BBV 202 /120 feeder Mechanically overhauled. Dedpfxsizi Hms Ab Doup CE-conversion possible. Contact us for details!

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg. Duedpfxjyktfto Ab Dsp

Condition: used, Year of construction: 1987, functionality: unexamined, pressing force: 20 t, stroke length: 38 mm, overall weight: 3,600 kg, BSTA 20 H press, with BBV 190/85 roll feed on left-hand side, Year of mfg. 1987 Adj. stroke 8 to 38 mm Dujdpsw S E Tlsfx Ab Dsp Nominal capacity 20 tons Max. tool loading width 420 mm For spare parts or overhaul/repairs. Sold in "as is" condition. Available immediately ex-stock. Please contact us for more information!

Condition: good (used), functionality: fully functional, Double-column automatic punching press Dsdpfsylz Avox Ab Dsup

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm Duodpfx Abou Icwgs Dsp slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Duodexzr Ruopfx Ab Dep Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Dujdpfoip Uqmox Ab Dsp Material thickness max. 3.0 mm