Used Wood shapers / wood routers for sale (27)

Condition: used, Copying pantograph brand Essetre serial number 945 2Vu2Ke

Condition: used, Type: OPTIMAT F 13 Year of construction: 2001 Condition: function-tested, very good, second-hand - Workpiece thickness 16 to 55 mm - Workpiece width min. 30 mm - Inner radius min. 35 mm - Edge thickness max. 3 mm - 2 milling motors 0.4 kW - Suction connection 80 mm Css87Cvu0U

Condition: used, Year of construction: 2004, x-travel 3000 mm Dpgqcj y-travel 1970 mm z-travel 920 mm Control Fanuc 18 M column daylight 2200 mm tool taper 50 spindle turning speed - stepless 40-4.000 U/min table-size 3100x1830 mm toolpiece magazine: chain magazine 40 Stück drive of main spindle 22 kW total power requirement kW weight of the machine ca. 32 t dimensions of the machine ca. 9,7x6x4,7 m

Condition: used, Year of construction: 2002, Machine/vehicle number: 02010, SECOND-HAND COPYING ROUTING SHAPER FOR CORNER BLOCKS BERMAQ MOD. C.T.C. - CE RULES - Boring unit Dpmo7P - Spindle moulder - S/N 02010 - Year 2002

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere 5,5 kw Transport dimension : L.1020 mm W. 800 mm H.1650 mm, with pallet Weight 470 kg Beibuwa

Condition: excellent (used), SCM T150 lower spindle milling machine Motor power 5.5kw Spindle diameter 30mm Total height of the spindle 180mm Milling unit tilting at an angle of -10 +45 Variable speed on the belt Bgz0Xbaxqdi Spindle speed 3000/4500/6000/7000/10000rpm Manual raising and lowering of the spindle Manual angle adjustment

Condition: used, Machine/vehicle number: 391, Bacci TSDCSF Automatic Double Rounding Tenoning Machine Ecgjej0G9

Condition: used, Year of construction: 1994, Used machine Year of construction: 1994 Condition: Age-appropriate Equipment and technical data: Gluing thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. trolley incl. buffing unit Dimensions: Approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Suction nozzle: 70 mm Bontwjmy Availability: short term Location: Solingen

Condition: excellent (used), For sale is a used Casadei F 115 TL milling machine with 5 milling speeds. The machine is in good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Huxlafs Technical data: - 5 milling speeds - Extractable Ø 140 mm - Direction of rotation switch - Motor power 6 kW / 8.2 hp The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: milling machine, milling machine, milling, Casadei Reference: R-F1043

Condition: used, Year of construction: 1966, Weight 4 T Year Zpmmo0Wt x-travel 1200 mm quill stroke mm digital

Condition: reconditioned (used), The machine is suitable for milling of edging materials with max. R2 on furniture parts. The milling motor is mounted on 2 movable carriages, which is pneumatically operated in Y- and Z-axis. The sensing rollers ensure an exact distance of the form to the workpiece. year of manufacture: 1990 electrical connection: 230 V Btqk8Syxk8 pneumatic connection: 3/8 1 piece form cutter with inserts for chamfer milling 30° 1 piece form milling cutter with inserts for radius milling

Condition: excellent (used), Functionality: fully functional, CAMAM GC6/2F-4L rotary milling machine Number of milling units 2 Number of grinding units 4 Pneumatic material pressure Maximum width of material 250mm The maximum height of the material 150mm Maximum length of material 1200mm Cb9X2Ck Feed speed adjustable 0-17m/min Machine in cabin Machine available on request

Condition: used, Year of construction: 2003, Machine/vehicle number: AB/155496, SECOND- HAND SPINDLE MOULDER SCM MOD. T130NPS - CE RULES - With inverter - SN AB/155496 Bwj7Ser9 - Year 2003

Condition: used, Used machine WIVAMAC® builds high-quality, inexpensive and easy-to-use copying machines for the precise production of small reproduction series of various carving works. WIVAMAC® copying machines can be used to effortlessly produce exact copies of existing original works or models. The conversion of 2½D profiles into 3D representations or models, including mirror image copying, can be done in just a few minutes without special tools. The smallest model, the KPB2545, is offered as a tabletop model. Laser-treated and welded steel tubes ensure stable and vibration-free operation. Specially ground shafts and ball bushes with dust-tight and adjustable counterweights make the copying carriage particularly easy to move and virtually maintenance-free. Precision chains for synchronous rotation of the 3D model. Wide selection of continuously adjustable motors: 1000W Pro and 550W HF. The latter for intensive use and less noise. The HF AC motors are frequency-controlled using a frequency converter. All machines are supplied with conventional 230V alternating current. The milling and tracing sections have a common carrier with freedom of movement at a special angle. This means that even hard-to-reach areas can be machined. Each machine is equipped with a standard 8 mm collet chuck into which milling heads with different cutting diameters can be clamped. A corresponding probe is built into the sensors. The KPB+S models can be used to produce exact copies as well as mirror images of the originals. Using a multiplex plate, the machine can be converted from a 3D image copying machine into a 2½D plate copying machine or flat milling machine in just a few minutes and with simple tools. The TWIN model is equipped with 2 milling motors for the simultaneous production of 2 copies. The KPB can also be used to make models of any other object, such as machine parts for prototypes, packaging and other purposes. Supplied as standard with an 8 mm cutter and a 4/8 mm tracer. KPB+S6099HF Motor: 3ph. 550W Speed: 12000 - 18000 RPM Maximum milling height: 990 mm Maximum milling width: 600 mm Dimensions: 1650 x 1750 mm Weight: 230 kg Cmvenrnp Availability: short term Storage location: Röllbach II

Condition: used, Weight 10 kg Year ca. 2009 Gnbpss Table dimensions mm Motor output kW Spindle diameter mm reus U/min

Condition: excellent (used), Functionality: fully functional, Balestrini Mini-C 2500mm linear copier milling machine Type MINI-C Working table length 2500 mm 2280Ct8Fm Two milling units, one per side Motor driving the milling machine 2 x 5.5 kw Tool height maximum 180 mm Complete with heads Feed of the table hydraulically smoothly adjustable Pressure units and material pneumatic Number of material clamps 5 pcs

Condition: used, Year of construction: 1999, Machine/vehicle number: AB/129849, SECOND- HAND SPINDLE MOULDER SCM MOD. T130N - CE RULES E2Nnxce - With inverter - SN AB/129849 - Year 1999

Condition: used, Year of construction: 2012, ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO CN – CE RULES - Max. horizontal tenon length 160 mm - Max. vertical tenon length 100 mm - Max. bench inclination 20° - Inclination of workpiece support guides: 45° - Production: 600/700 tenons per hour - Spindle Ø 25 mm - Benchs: * Dimensions 315x360 mm * Longitudinal axis inclination 0° ÷ -20° * Piece support guide adjustment 0° ÷ 45° - Numerical Control * Piece support guide adjustment 0° ÷ 45° * Axis movements 2 DC motors “brushless” * X axis stroke 600 mm * Y axis stroke 200 mm * X, Y axis speed 15 m/min. * Execution of programs in quick tasks * Program memory 1000 pcs. * Programming using macros Cyko3Uodg8 - 9000 / 12000 rpm. - Cutter motor power 4 hp - Volts. 380/50 - Year 2012 - CE Standards

Condition: used, Year of construction: 1995, Machine/vehicle number: 1/95, SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - Double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - Kw 28 Bhwt9Aypl9D - Year 1995

Year of construction: 2003, Condition: used, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - Working length mm. 1200 Kut0Zktpm - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF - Volt. 380/50 - S/N 772 - Year 2003

Year of construction: 2008, Condition: used, SECOND-HAND SPINDLE MOULDER WITH TILTING SHAFT SCM MOD. TI120 - CE RULES - Tenonig carriage 9Tc0Drfr9G - Year 2008

Year of construction: 1995, Condition: used, SECOND-HAND ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO - CE RULES - Max tenon dimensions 100x30 mm - Table tilt: max 20° - Workpiece fence max inclination 45° - Production: 600-700 tenons/hour - Tool rotation 9.000 rpm - Tenoning unit motor4hp - Volt. 380/50 Y87H9D - S/N F356M16 - Year 1995

Year of construction: 2004, Condition: ready for operation (used), SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) Cgbqp7M8Y3 - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - touch screen NC control - with loader CSF - safety net - S/N 800 - CE rules (year 2004) - RECONDITIONED

Year of construction: 2002, Condition: used, SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - working length mm. 170 – 2000 mm - max tenon length 80 mm - production: 1800 tenons/hour (900-1350 pieces/hour) - tool rotation 11,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader RBF 2 - volt. 380/50 Ogribnvf - S/N AO.118.88 - year 2002

Year of construction: 1997, Condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L 938Ay7B - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - S/N 73 - CE rules (year 1997)