Used Hurlimann H-6200 for sale (55,727)

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Djlhcdwowuzzrj Hsku Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel ranges Travel range X: 1350 mm Travel range Y: 970 mm Travel range Z: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 Kg Horizontal/Vertical Milling Support Working spindle Diameter at the front bearing: 110 mm Drive power: (60% ED) 30 kW Drive power: (100% ED) 29 kW Torque: (60% ED) 1088 Nm Torque: (100% ED) 985 Nm Spindle speed: 20…6000 rpm Delhcsz Nc Eisdw Hsku Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece mass incl. fixture up to speed of 60 min-1 2000 kg Workpiece mass incl. fixture above speed of 60 min-1 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100%ED) 57 kW Drive torque (100%ED) 2520 Nm Machine is equipped with an automatic imbalance detection system Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 Kg Internal coolant supply through the spindle center up to a maximum of 80 bar In addition: - Coolant gravity belt filter by Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 by Renishaw Net machine weight with H/V support approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Technical data subject to change without notice. Errors and prior sale reserved.

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Dslsi D D Efshcdw Hjku Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: good (used), Year of construction: 2013, operating hours: 1,561 h, functionality: fully functional, General Information Description Specification Manufacturer MAZAK Model Quick Turn Smart 200 CNC Control Mazatrol Smart Year of Manufacture 2013 Serial Number 249187 Total Operating Hours 11,755 hours Cutting Hours 1,561 hours Network Connection LAN Condition Very good technical condition, clean, accurate and exceptionally well maintained 2. Machining Capacity & Working Area Description Specification Maximum Swing Diameter 530 mm Maximum Swing Over Cross Slide 343 mm Bar Capacity 65 mm Spindle Bore 76 mm X-Axis Travel 195 mm Z-Axis Travel 560 mm X-Axis Rapid Traverse 30,000 mm/min Z-Axis Rapid Traverse 33,000 mm/min 3. Spindle & Tooling Description Specification Maximum Spindle Speed 5,000 rpm Spindle Motor Power 15 kW Selectable Thread Start Position Yes Through-Tool Coolant Yes Tool Turret 12 stations Turret Indexing Time 0.17 seconds per station Tailstock Automatic, MT5 Tool Measuring Arm Included Parts Catcher Included Robot Interface Additional M-function (1 pair) Smartshift BASE Quick-Change System Included Chuck SMW AUTOBLOK Collet Chuck 4. Integrated Automation – Universal Robots UR5e Collaborative Industrial Robot (Cobot) Description Specification Manufacturer Universal Robots Model UR5e Year of Manufacture January 2021 Robot Type Collaborative Robot (Cobot) Usage Demonstration use only Payload 5 kg Reach 850 mm Repeatability ±0.03 mm Working Envelope 2.6 m³ Maximum TCP Speed 1,000 mm/s Joint Speed 180°/s Robot Weight 21 kg Mounting Options Floor, ceiling, wall or angled mounting Power Supply 100–240 V AC Power Consumption Approx. 200 W Controller UR e-Series Control Box Programming URScript and graphical block programming Safety Standards ISO 10218-1, ISO/TS 15066, PLd Category 3 Fieldbus Communication PROFINET, EtherNet/IP, Modbus TCP Digital I/O 16 inputs / 16 outputs Analog I/O 2 inputs / 2 outputs Tool Flange ISO 9409-1-50-4-M6 5. Robot Integration with Mazak Smart 200 The UR5e robot is fully integrated with the Mazak Quick Turn Smart 200, providing a complete automated machining solution. - Smartshift BASE quick-change coupling system - Additional M-function for robot interface - Pre-programmed automation sequences - Quick switching between manual and robotic operation - Video available showing the robot and machine operating together - Fully tested and used in production - Complete robot and machine integration 6. Machine Condition Djlhcdwsz Nyn Ns Hoku The machine is reported to be in excellent technical and operational condition. - Fully operational and functioning correctly - No active alarms or critical faults - Smooth movement on all axes - Spindle runs smoothly without abnormal vibrations - Linear guides and ball screws in good condition - Hydraulic and pneumatic systems functioning normally - Regular in-house maintenance performed - Lubrication system operating correctly - Primarily used for light machining of aluminium and plastic components - Robot and CNC machine fully integrated and tested 7. Documentation Available - Machine photographs - Video of machine operation - Complete machine manuals - Electrical diagrams

Condition: excellent (used), Thermo Scientific Dslhcdwsziy D Ej Heku Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Dkolhcdszgq Szsw Heu

Condition: excellent (used), CATALOGUE NUMBER 7926 TECHNICAL DATA - working length 6200mm - working width 150mm - working height 1350mm Dkelhcezmfvuodw Heu - 12 vertical hydraulic cylinders - dimensions (L/W/H) 6580/1270/2350mm - weight approximately 4000kg ADVANTAGES - very good condition - used press - unpainted - designed for professional use Net price: 69900 PLN Net price: 16256 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, machine/vehicle number: 1941, empty load weight: 7,480 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2011, next inspection (TÜV): 10/2024, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,770 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65/22.5, color: silver, Year of construction: 2011, Equipment: ABS, H & W moving floor , Cargo Floor floor , Lift axle , Roller tarpaulin , Platform , Folding rear light protection , Moving wall with service door , German trailer Sale only to traders and under exclusion of any warranty . We deliver to any GERMAN seaport . Dslhcdeq T Iuyow Hsku

Condition: used, Year of construction: 2013, x-travel 700 mm y-travel 700 mm z-travel 700 mm control 840 D sl Siemens Max. Speed Subspindle 10.000 min/-1 power capacity - main spindel 42 kW max. Torque 236 Nm tool taper HSK-A 63 DIN 69893 Number of pallet-stations 10 pos. size of pallet 500 x 500 mm max. workpiece weight 600 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm number of toolpositions 180 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 550 mm max. tool weight 12,0 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 sec rapid traverse ( X / Y / Z ) 60 m/min feed speeds max. 60.000 mm/min Accelaration x/y/z: 6 / 6 / 5 m/s² feed power 10 kN Dolhcdwoz I Dy Sj Hoku total power requirement 67 kW weight of the machine ca. 9,7 t dimensions of the machine ca. 7,5 x 5,0 x 2,8 m CNC - Machiningcenter Horizontal DECKEL MAHO - DMC 65 H duoBLOCK

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8/300x1600x2600 mm Weight 4000 kg Dkelhcsv A Hu Ujdw Heu Total power requirement 0 kw

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394A01233, Year of construction: 2010, operating hours: 9,499 h, load capacity: 4,500 kg, lifting height: 4,400 mm, fuel type: gas, mast type: simplex, construction height: 3,121 mm, drive type: Treibgas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 4,400 mm Overall height: 3,121 mm MACHINE DETAILS Mast type: Standard Vehicle type: Internal combustion forklift Operating hours: 9,499 h EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Dkjlhcdwsz I R Age Hou Full cab External reference: SL12694SP

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift Dkslhsz Iwi Hocdw Hsu UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393Z00745, Year of construction: 2009, operating hours: 32,592 h, load capacity: 3,000 kg, lifting height: 5,900 mm, free lift: 1,874 mm, fuel type: gas, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,900 mm Free lift: 1,874 mm Overall height: 2,641 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 4,925 kg Operating hours: 32,592 h EQUIPMENT 3rd valve 4th valve Heater Full cabin Dkslhcdwsz I I I Ho Hju External reference: SL16126SLO

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393H00421, Year of construction: 2017, operating hours: 14,426 h, load capacity: 3,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,714 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,950 mm Overall height: 2,714 mm Load capacity: 3,500 kg Dslhjz I Rf Iecdw Hsku MACHINE DETAILS Mast type: Standard Vehicle type: Diesel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 4,430 kg Operating hours: 14,426 h EQUIPMENT 3rd valve 4th valve External reference: SL14851SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394C01558, Year of construction: 2012, operating hours: 11,960 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,421 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,000 mm Overall height: 3,421 mm Load capacity: 5,000 kg MACHINE DETAILS Mast type: Standard Vehicle type: Diesel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 8,830 kg Operating hours: 11,960 h EQUIPMENT Half-cab Side shifter 3rd valve 4th valve Dslhcsz I Rqwjdw Hoku Heater External reference: SL14107SP

Condition: used, Technical details: material width: 400 mm material thickness: 2 mm Number of Straightening rolls: oben/upper/arriba: 5x Number of Straightening rolls: unten/lower/abjo: 6x roll width: 410 mm throughput speed: 9-20 m/min total power requirement: 5,5 kW Weight approx.: 1,3 t space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and guidance waggon - 2 intake limits / output limits This straightening machine must be electrically integrated by the customer! * Delhcdeu Ic Dysw Heku

Condition: used, machine/vehicle number: H2X393G05053, Year of construction: 2016, operating hours: 15,338 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,650 mm Fork carriage adjustment: 550–1,940 mm Fork length: 1,800 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Diesel Next service: in 461 hours UVV (German accident prevention regulations) valid until: 06/2027 Dimensions (L x W x H): 4,700 x 1,250 x 2,190 mm Operating hours: 15,338 h EQUIPMENT Former Linde full-service unit 3rd and 4th valve Full cabin Heater Windshield wiper LED work light, front Dkjlhjz Iwr Iecdw Hou LED work light, rear Comfort seat Fork carriage with side shifter All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 173

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394F03221, Year of construction: 2015, operating hours: 7,585 h, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,971 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,700 mm Load capacity: 5,000 kg MACHINE DETAILS Mast type: Standard Vehicle type: Diesel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Dslhcdjz I Intjw Heku Overall height: 2,971 mm Operating hours: 7,585 h EQUIPMENT 3rd valve 4th valve Heater Full cab Twin tires External reference: SL16576SP

Condition: good (used), Year of construction: 2016, operating hours: 552 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 700 kg, mileage: 552 km, SEVERAL UNITS IN STOCK Electric pallet truck with lifting function, brand Still (Germany), year of manufacture 2016, 552 operating hours. Capacity: 2,000 kg as a pallet truck, 800 kg as a stacker. Lifting height: 800 mm. INITIAL LIFT, ideal for uneven floors. DUO function. Battery from 2016, equipped with an external charger and an automatic filling system. Delhcdwsz Nwk Uo Hsku

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Delhcdjz Iw A Hew Heku Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: new, functionality: fully functional, Year of construction: 2026, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) (EXAMPLE) This state-of-the-art 4-pipe heat pump was specifically designed for the flexible, simultaneous, or independent provision of both chilled and hot water. Thanks to the latest inverter technology and the environmentally friendly refrigerant R290, the system offers maximum energy efficiency with a minimal environmental footprint. The unit features robust cladding panels and integrated sound insulation for the compressor compartment, ensuring extremely quiet operation. Dkjlhoz Nvkajcdw Hou Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the system is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Credit brokerage and advice are provided by KREDIT DE AG. Representative example according to § 17 PAngV: Basis for calculating the stated rate (assuming creditworthiness): Net loan amount €35,000.00, 7.10% fixed interest rate, 7.20% per annum effective annual interest rate, 96 months term, total amount €45,976.68, monthly installment €478.92.

Condition: used, machine/vehicle number: H2X392V00600, Year of construction: 2018, operating hours: 8,030 h, load capacity: 2,500 kg, lifting height: 4,600 mm, mast type: triplex, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,600 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,200 mm Weight: 3,950 kg UVV certificate valid until: 05/2027 Next service due in: 470 hours Operating hours: 8,030 h EQUIPMENT Full free lift 3rd hydraulic valve Side shifter Full cabin without driver's door Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat Lumbar support Seat heating Display of the tilt angle Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Dslhcdez Iwm Esw Heku Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 105

Condition: used, mileage: 52,000 km, power: 129 kW (175.39 HP), first registration: 03/2024, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 7 m³, loading space length: 6,200 mm, loading space width: 2,300 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Transmission * Automatic transmission, 8 gears Driver Assistance Systems * Cruise control * Lane keeping assist * Hill start assist Lights and Visibility * Headlight range adjustment * Tinted glass * Daytime running lights Audio & Communication * Radio * Digital radio reception DAB * Multi-function display * AUX & USB connection * Bluetooth hands-free system Exterior * Drive: Rear-wheel drive * Leaf spring suspension * Electrically adjustable and heated exterior mirrors * Twin tires * All-season tires * Connector plug 1x13 pole: Preparation Safety * Driver airbag * Electronic Stability Program ESP * Traction control ASR * Anti-lock braking system ABS * Immobilizer * Underrun protection: rear * Emergency brake assist Interior * Seats, fabric * Digital tachograph * Multifunctional steering wheel * On-board computer * Load compartment floor, wood * Floor covering, rubber Comfort * Air conditioning * Driver's seat, height adjustable * Passenger bench seat, 2 persons * Power steering * Adjustable steering column * Electric windows, 2-way * Central locking with remote control * Cup holders Load compartment * Length 6,200 mm, width 2,300 mm, height 500 mm Dkslhcdwszfd R Uj Hsu * Volume 7 m³ Other dimensions and weights * Payload: 3,700 kg * Permissible total weight: 7,200 kg * Total weight of the vehicle combination: 10,500 kg * Fuel tank: 120 l * AdBlue tank: 20 l * Wheelbase: 5,100 mm ----- Includes conversion to a flatbed by Junge - Dimensions 6200 x 2300 x 500 mm - Front wall protection grid - IVECO CERTIFIED PRE-OWNED STANDARD - Fluids topped up (except fuel) - Decaled and basic cleaning - Signs of use - IVECO CERTIFIED PRE-OWNED PLUS (Surcharge net 2,500.00 + VAT) - TÜV and emissions test renewed - UVV LBW renewed - Tachograph inspection renewed - Installation of OBU / toll device - Inspection renewed - Decaled and basic cleaning - Technical inspection + repair - IVECO CERTIFIED PRE-OWNED PREMIUM (Surcharge net 3,000.00 + VAT) - TÜV and emissions test renewed - UVV LBW renewed - Tachograph inspection renewed - Installation of OBU / toll device - Inspection renewed - Decaled and basic cleaning - Technical and optical refurbishment + repair - Surcharge for trailer coupling net 3500 + VAT - Surcharge for roof spoiler net 990 + VAT - Surcharge for reversing camera net 85

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Dolhcsy H Dblsdw Hoku Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, machine/vehicle number: FR Jungheinrich, Year of construction: 2020, load capacity: 1,000 kg, lifting height: 6,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,600 mm, fork length: 1,200 mm, tire condition: 95 %, Equipment: head guard, lighting, sideshift, Jungheinrich EFG 550 Electric Front Forklift, 450 hours, Year 2020, 6200mm lift height Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2020 Operating hours: 485 (may vary, machine is still in use) Technical condition: very good Optical condition: very good Mast type: none, lift height: 6,200 mm Overall height: 2,600 mm Dkslhcdwjpq Id Rj Heu Free lift: 1,800 mm Fork carriage / side shifter Fork length: 1,200 mm Incl. charger In very good condition Pickup by appointment only in 79111 Freiburg. Shipping by freight carrier possible, please inquire with your postcode.