Used Hurlimann H-466 for sale (56,034)

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h Nsdpfx Aj Ad Rdijdlelh EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Njdpewuzzrjfx Adlelh Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: H2X393V04194, Year of construction: 2019, load capacity: 3,000 kg, lifting height: 3,615 mm, fuel type: gas, mast type: duplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm MACHINE DETAILS Mast type: Duplex mast Fuel type: LPG Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,250 x 2,441 mm Own weight: 4,675 kg Next service due in: 673 operating hours EQUIPMENT Full free lift Side shifter Integrated scale Nlsdpfx Asz Nwaijdljh Full cabin Radio Heater Air conditioning Windshield wiper LED work light (front) LED work light (rear) Safety light (front) Safety light (side) Rear view camera Comfort seat with lumbar support Seat heating LPG gas tank Formerly a Linde full-service unit Additional hydraulics: 3rd valve Additional hydraulics: 4th valve, prepared for fork positioner All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 142

Condition: used, machine/vehicle number: H2X391X00341, Year of construction: 2020, operating hours: 15,584 h, load capacity: 2,000 kg, lifting height: 4,625 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,625 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast Lift type: Full free lift Drive type: Liquefied petroleum gas (LPG) Dimensions & Weight Dimensions (L x W x H): 3,600 x 1,150 x 2,121 mm Weight: 3,391 kg UVV certificate valid until: 06/2027 Next service due in: 416 hours Operating hours: 15,584 hours EQUIPMENT Former Linde full-service unit Full cabin Heater Windshield wiper Nedpfx Adez Nxg Dolslh Tilt angle indicator Fork positioner Side shifter LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas cylinder Hydraulically adjustable forks Side shifter Hydraulic valves: 3rd + 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 182

Condition: used, machine/vehicle number: H2X393V04197, Year of construction: 2019, operating hours: 24,689 h, load capacity: 3,000 kg, lifting height: 3,615 mm, mast type: duplex, fork length: 1,350 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm Telescopic forks: up to 2,350 mm MACHINE DETAILS Mast type: Duplex mast with full free lift Drive type: LPG Fuel system: LPG gas tank Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,250 x 2,441 mm Weight: 4,680 kg Next service due in: 311 hours UVV certification valid until: 07/2027 Operating hours: 24,689 hours EQUIPMENT Former Linde full-service unit Tilt angle indicator Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Safety light (front) Nodpfx Adoz Npl Djlslh Safety light (rear) Safety light (side) Rear-view camera Comfort seat Lumbar support Seat heating Functional and condition video available Hydraulics: 3rd and 4th hydraulic valve Side shifter Integrated scale All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 96

Condition: used, machine/vehicle number: PKY391L00221, Year of construction: 2022, operating hours: 15,536 h, load capacity: 2,000 kg, lifting height: 3,150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,150 mm MACHINE DETAILS Drive type: LPG Dimensions & Weight Nljdpfx Adez Nxf Toleh Dimensions (L x W x H): 3,500 x 1,150 x 2,196 mm Self-weight: 3,290 kg Next service due in: 464 hours UVV certificate valid until: 06/2027 Tires replaced: 06/2026 Operating hours: 15,536 hours EQUIPMENT Facelift model with tilt angle indicator Clear-view mast without central hydraulic cylinder 3rd hydraulic valve Side shifter Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Seat heating LPG gas tank All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is carried out at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 181

Condition: used, machine/vehicle number: H2X392X00473, Year of construction: 2020, operating hours: 7,569 h, load capacity: 2,500 kg, lifting height: 4,600 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nlsdpjz Nyl Iefx Adljh Load capacity: 2,500 kg Lifting height: 4,600 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,200 mm Self-weight: 3,895 kg Next service due in: 413 h UVV certificate valid until: 06/2027 Operating hours: 7,569 h EQUIPMENT 3rd valve Side shifter Full cabin without driver's door Heater Windshield wiper LED work light, front LED work light, rear Comfort seat Lumbar support Seat heating Display of tilt angle Previously a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 235

Condition: used, machine/vehicle number: H2X393V02496, Year of construction: 2019, operating hours: 17,217 h, load capacity: 3,500 kg, lifting height: 4,450 mm, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,450 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast Operating type: LPG Dimensions & Weight Dimensions (L x W x H): 4,100 x 1,350 x 2,964 mm Self-weight: 4,900 kg UVV certificate valid until: 04/2027 Next service due in: 388 hours Operating hours: 17,217 h EQUIPMENT Former Linde full-service unit Free-lift mast without center hydraulic cylinder Multi-directional fork positioner Side shifter Full cab Radio Heater Windshield wiper LED work light (front) LED work light (rear) Safety light (rear) Safety light (side) Comfort seat with lumbar support Seat heating Display of the tilt angle Nledpfx Asz Nwugodlsh LPG gas exchange cylinder Hydraulics: 3rd + 4th valve All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 166

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The engine was overhauled in 2024! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Windshield wiper Nljdpfx Ajz Nvqmodljh LED work light (front) LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Nlodpfszgq Szjx Adloh Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: used, machine/vehicle number: H2X393A00281, Year of construction: 2010, operating hours: 10,577 h, load capacity: 2,500 kg, lifting height: 4,015 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,015 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Duplex mast Mast design: Free-lift mast Drive type: Diesel Engine: VW Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,641 mm Own weight: 4,160 kg Operating hours: 10,577 h Next service: in 739 operating hours EQUIPMENT Free-lift mast without central hydraulic cylinder 3rd hydraulic valve Side shifter Half cabin with windshield wiper LED work light, front LED work light, rear Orange warning light Comfort seat Previously a Linde full-service unit Njdpfx Adjz Nyn Aelslh All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 249

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Nlodpfs Afhlajx Adlsh Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Note: The machine has already been dismantled.

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,035 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: H20/600D EVO Year of manufacture: 2019 Operating hours: 7,035 h Drive type: Diesel Lifting Equipment Mast type: Duplex mast Lifting height: 4,250 mm Free lift: No Free-lift mast: Without central hydraulic cylinder Tilt angle indicator: Present Load capacity and forks Nljdpfx Aoz R D A Hodlsh Load capacity: 2,000 kg Fork length: 1,200 mm Side shifter: Present 3rd hydraulic valve: Present 4th auxiliary hydraulic valve: Present, free for fork positioner Hydraulically adjustable forks: No MACHINE DETAILS Dimensions and weight Overall length: 4,100 mm Overall width: 1,200 mm Overall height: 2,777 mm Dead weight: 3,740 kg Maintenance and inspection Next service due in: 878 h UVV valid until: 03/2027 EQUIPMENT Full cabin Heater Windshield wiper Road traffic lighting with turn signals LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Lumbar support Seat heating Formerly a Linde full-service machine All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 216

Condition: used, machine/vehicle number: H2X393V04185, Year of construction: 2019, operating hours: 14,576 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm MACHINE DETAILS Mast type: Duplex mast Lift type: Full free lift Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,250 x 2,441 mm Own weight: 4,665 kg UVV certificate valid until: 09/2027 Next service due in: 423 hours Operating hours: 14,576 hours EQUIPMENT Former Linde full-service unit 3rd hydraulic valve 4th hydraulic valve Side shifter Hydraulic telescopic forks Integrated scale Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Safety light, front Safety light, rear Safety light, side Rear view camera Comfort seat Lumbar support Seat heating LPG gas tank Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Nedpfez Nxd Nox Adlelh Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 171

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49063, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 69,700 h, For sale is a highly productive, horizontal 4-axis CNC machining center, type Heller H 4000, manufactured in 2008. This machine comes from a plant closure and is characterized by its exceptional stability, high precision, and maximum reliability in series and single-part production. It is fully functional and can be inspected while powered on, by arrangement. Equipment: - Horizontal spindle - Pallet changer with rotary table - Additional 4-position rotary table Keppler SN: M4.4906301 (each with a rotary table) - Chip conveyor Knoll 600K-1 - Fine chip removal system - Coolant/lubricant treatment with band filter Accessories: - Workbench (8 drawers) - Telescopic drawer cabinet - Storage shelf Contents: Hand tools, various analog and digital measuring instruments, machine accessories Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that are tailored to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don’t have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Nlsdj Afva Espfx Adloh Subject to prior sale, changes, and errors!

Condition: used, functionality: fully functional, machine/vehicle number: 1941, empty load weight: 7,480 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2011, next inspection (TÜV): 10/2024, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,770 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65/22.5, color: silver, Year of construction: 2011, Equipment: ABS, H & W moving floor , Cargo Floor floor , Lift axle , Roller tarpaulin , Platform , Folding rear light protection , Moving wall with service door , German trailer Nlodpfjq T Iuyox Adljh Sale only to traders and under exclusion of any warranty . We deliver to any GERMAN seaport .

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Nedpfxjz Rmk Ts Adlelh Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, mileage: 398,000 km, power: 335 kW (455.47 HP), first registration: 08/2006, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro5, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, Equipment: crane, soot filter, Crane: Nedpfx Aoziwiljdljlh ----- Retarder – Air conditioning – Leaf spring suspension – 3-way tipper Trösch – Hiab 166-5, year of manufacture 2009 – Radio remote control Suspension: Leaf spring suspension

Condition: ready for operation (used), Siemens 1GG6204-0WC46-6HV1-Z main drive motor with fan, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Nledpox Dvdqjfx Adlsh

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nledpez S Nwfjfx Adlsh Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. Nodpfo Afw Tmsx Adlolh With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, saw blade diameter: 400 mm, cutting range round steel at 45°: 130 mm, cutting range round steel at 90°: 130 mm, overall weight: 2,500 kg, cutting range square steel at 90°: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16, 2026, and November 26, 2026! The machine has been completely overhauled and repainted! TECHNICAL DETAILS Round material at 90°/45°: 130 mm Square material at 90°: 120 mm Profiles at 90°: 300 × 45 mm Profiles lying at 45°: 220 × 60 mm Profiles standing at 45°: 80 × 120 mm Saw blade: 400 × 4 × 50 mm Saw blade mount: 50/4 × 14/80 mm Saw motor: 3.7/4.5 kW Cutting speed: 1,750/3,500 m/min Saw blade feed: 0–3,700 mm/min Rapid return of saw blade: 4,500 mm/min Short-stroke clamping device stroke: 8 mm MACHINE DETAILS Operating voltage: 400 V Njdpfsz Il Hyjx Adlelh Frequency: 50 Hz Rated current: 20 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,200 x 2,000 mm Weight: 2,500 kg EQUIPMENT Workpiece clamping with short-stroke clamping device Hand crank for pre-setting Horizontal clamping cylinder at the front Minimum lubrication instead of a coolant mist spray system Feed roller track T3 Rollers of the feed roller track: 60 × 289 mm Starting section of the roller track, length 2,000 mm, with 5 rollers Stand for roller track Mounting bracket Extension of the roller track, length 2,000 mm, with 4 rollers Stop roller, adjustable as a guide for material bars Length measuring device Discharge roller track T3 External Reference: Steinbach & Holler - Lot 39

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #583 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure flushing and suction tank body, ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2546 6x2 with a combined KROLL high-pressure flushing and suction tank body is a NEW vehicle in a complete ADR L4BH configuration. Equipped with a VacuStar 1600, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special equipment, it is immediately ready for the most demanding sewer, industrial, and hazardous material operations. Body ? Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH ? Tank material: S355J2+N (St 52.3) ? ADR suction/pressure tank Type K 14.0 / 28 PE ? Extension piston with 3 locking points: ? 3,300 l water / 10,600 l sludge ? 5,500 l water / 8,200 l sludge ? 7,700 l water / 6,000 l sludge ? Suction from open bodies of water possible ("comfort version") via cassette boom with integrated filter ? Tank wagon equipment ADR - Type class AT/FL L4BH ? Emptying via pneumatically operated piston ? Sludge water drain DN80 for pumping back via the boom into the sewer ----Vacuum system ? CVS VacuStar 1600 - approx. 1,550 m³/h at 400 mbar ? Approx. 20 m HD hose DN125 Nlsdpfx Adszuiyaelsh ? Hose storage cassette with simultaneous telescopic boom DN125 ? Parallel routing of suction and HD hose via boom ? Right-hand suction hose reel (hydraulic) with 30 m DN75, can be suctioned through ----High-pressure system ? Uraca KD 718 - approx. 315 l/min at 170 bar ? Large HD hose reel for 240 m DN25, 180° swiveling ? Equipped with 160 m DN25 ? Small HD hose reel for 80 m DN13 (hydraulic) ? Equipped with 80 m DN13 ----Special features ? Hose storage cassette with telescopic boom DN125 ? Infinitely adjustable height of the suction hose (hydraulic, roller guide carriage) ? Boom arm hydraulic, telescopic, 180° swiveling ? ADR L4BH incl. EX/II, EX/III and AT ? Spray gun ? LED rotating beacons ? LED ambient lighting ? Working functions remotely controlled via CAN-BUS ? Radio remote control with 14 functions ? Hot water hand wash basin ? Large equipment cabinet at the rear left (e.g. for a push camera) ? Reversing camera with 7" color monitor (day/night mode) ? Soundproofing cladding in front of the pump compartment ? Large equipment box ? Tool box ? Holder for traffic cones ? Vise ? Ladder ? Large advertising panels on the right and left ---- Conclusion A fully equipped, new Arocs/KROLL combination vehicle with a powerful suction unit, 315 l/170 bar HD system, ADR L4BH, and extensive special equipment. Ideal for professional companies with the highest technical requirements. For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our terms and conditions and with the exclusion of any warranty.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Nlsdsy H Dblspfx Adlsh Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, machine/vehicle number: H21202Y00369, Year of construction: 2021, operating hours: 16,945 h, load capacity: 3,500 kg, lifting height: 5,495 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 5,495 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Duplex mast Drive type: LPG UVV certificate valid until: 09/2027 Next service due in: 853 hours Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 3,424 mm Own weight: 5,523 kg Operating hours: 16,945 h EQUIPMENT Facelift model Njdpfx Ajz Nn A Uedlslh Former Linde full-service unit Duplex free-lift mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Full cabin Air conditioning (AC) Cabin heater Windshield wiper LED work lights front and rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 40