Used Ciata 245 S for sale (67,587)

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting Bolhcdwszupzqe Ejwu This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Bjlhcozghf Esdw Eowu

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Bwslhszf Agzscdw Esu Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Condition: ready for operation (used), Year of construction: 1994, Holzher 1245 Superslide electromotoric height adjustment with digital display electromotoric tilt adjustment with digital display Cutting length with sliding table mm 3200 Crosscut length with sliding table mm 3200 Cutting width mm 1250 Table size mm 1100 x 800 Bwjlhsy Sgxdocdw Eou Max saw blade diameter mm 450 Saw blade bore mm 30 Saw tilting range 0-45° Maximum cutting height at 450 mm Ø mm 150 Cutting height at 45° at 450 mm Ø mm 106 Motor power kW 7.5 Saw motor speeds rpm 3/4/5000 Extraction port Ø mm 80/120 Machine weight approx. kg 930 Connection value V/Hz 380/50 Year of manufacture 1994 Price 5200.-

Condition: good (used), Year of construction: 2014, Device for feeding printed products Belhjxwqkrocdw Ejwu

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment Bslhsz Imc Nocdw Eswu This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Year of construction: 2009, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: PWM270xx01, Automation equipment manufactured in 2009. This REHM VXS nitro 2450 (Typ 523) features a power output of 48 kW and a conveyor speed of 850 mm/min. It is designed for efficient nitrogen consumption of approximately 20 m³/h and has a robust exhaust air capacity of 400 m³/h. If you are looking to get high-quality automation capabilities, consider the REHM VXS nitro 2450 (Typ 523) machine we have for sale. Contact us for further details. - Voltage: 3 x 400V, 50 Hz- Power: 48 kW- Nitrogen Consumption: approx. 20 m³/h (ca. 20m³/h)- Exhaust Air: 400 m³/h- Machine utilisation: 1-shift operation- Conveyor Speed: 850 mm/min- PCB Width: 192.7 mm / 197.5 mm- MU-Position: 100.0 mm / 99.9 mm- Control Software / Program: PWM270xx01 Belozx S A Sjhcdw Eswu

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Bslhcsy Uyfpjdw Eewu

Condition: good (used), FERAG JetFeeder Bolhcdwotk S D Ij Eswu Feeder for feeding printed products into an inserting line

Condition: like new (used), Year of construction: 2018, We offer You line Cabinplant with Multivac for snack packing. Production date of all machines year 2018. Line consisting af -Cabinplant 1 line elevator -Cabinplant 3 line elevator -Multihead weigher Cabinplant MHW 10 24 -Multihead weigher Cabinplant MHW 10 32 Bjlhcjpxm Ugodw Eowu -KEN hygiene system EWD 50 -Platform with stairs -Cabinplant distribution tools 2 pcs -Multivac R245 Type ASE 500, gas, vacum, without a vacum pump The set worked only during device tests, working for approximately 100 hours. The line was dismantled by the manufacturer's services: Cabinplant and Multivac.

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Bslhcdey In Dgew Eswu Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Bsley In A Nohcdw Eewu Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Bwelhoz Hxb Uscdw Esu Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Bslhou Imigjcdw Eowu

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 245 h, load capacity: 1,600 kg, lifting height: 3,244 mm, fuel type: electric, mast type: simplex, construction height: 2,190 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load centre: 600 Mast type: Standard Condition: Refurbished without warranty Bwelhjuttlwjcdw Eou Technical condition: Very good Front tyre type: Vulkollan Front tyre size: Brand new Front tyre condition: New Rear tyre type: Vulkollan Rear tyre size: Brand new Rear tyre condition: New Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: suitable Battery type: PzS Battery year of manufacture: 2018 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV) // Completely repaired, serviced and checked Free hydraulic function for rotary units or telescopic forks

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Bwoler Ig H Tehcdw Eju Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,555 h, load capacity: 3,000 kg, lifting height: 3,300 mm, construction height: 2,270 mm, overall weight: 5,507 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,300 mm Overall height: 2,270 mm Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 500 Ah (Li-Ion, year of manufacture: 2021) Charger: 80 V - Li-Ion Weight: 5,507 kg Operating hours: 10,555 h Bwjlez H Rhashcdw Esu EQUIPMENT 3rd valve 4th valve Rear work light Front work light Heater Full cabin Side shifter

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 64 S, Wiesheu Bread Oven Euromat – 2X 5 Trays | Year of Manufacture: 2020 | Excellent Condition | Incl. Mobile Base For sale: Wiesheu Euromat bread oven (10 trays) from 2020. The oven is in excellent condition and has always been well maintained. Delivered including mobile base, ideal for flexible placement in a bakery, shop, or food truck. Specifications • Brand: Wiesheu • Model: Euromat 10 trays • Year of manufacture: 2020 • Condition: Excellent / minimal signs of use • Including mobile base • Professional quality, reliable and energy-efficient • Perfect for bakeries, hospitality, catering or market use Bjlhcoxyyazsdw Eswu Wiesheu is known for its durable and high-performance ovens. The Euromat series is popular due to its fast heat-up times, even baking results, and user-friendly operation. Prices excl. VAT Viewing possible. #Wiesheu #WiesheuEuromat #BreadOven #BakeryOven #CommercialOven #InstoreBaking #WiesheuOven #BakeryEquipment #ProfessionalOven #MIWE #Wachtel #Bongard #Debag #SvebaDahlen #Salva #CateringEquipment #BakeryOven #BakeryMachines

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1205-H740-00, total width: 1,650 mm, total height: 2,700 mm, total length: 2,500 mm, overall weight: 6,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 50 mm, controller model: ANDRONIC 2060, nominal power (apparent): 12 kVA, LANG RM 400 S/Y CNC engraving and milling machine Bweljzlglzshcdw Eju - Operating voltage: 230/400 V - Frequency: 50 Hz - Travel range X-axis: 500 mm - Travel range Y-axis: 100 mm - Travel range Z-axis: +-50 mm, relative to the center axis of the RGV/200 mm - Swivel radius of the control panel: approx. 1050 mm - Travel speed X and Z axes: max. 30 m/min - Travel speed Y-axis: max. 20 m/min - Acceleration X/Y/Z at 10 m/s² Attention: The item must be collected between October 7th and October 14th, 2026, on a date to be determined. FCA D-35576 Wetzlar - loaded onto a truck.

Condition: excellent (used), CATALOGUE NUMBER 7890 Technical specifications: - track width 245mm - shaft width for the edger 380mm - shaft width for the multi-blade saw 320mm - max. blade diameter 350mm - blade arbor diameter for the edger 80mm - blade arbor diameter for the multi-blade saw 65mm - max. cutting height 120mm - table width with clearance 900mm - table length 1780mm – from above: - feed rollers/ejectors - smooth pressure shaft - feed rollers - smooth pressure shaft - insert for short pieces - shaft with saws - 2 smooth pressure shafts – from below: - guide - feed rollers/ejectors - track - central lubrication - laser - stepless feed speed adjustment - feed motor 1.1kW Bwslhcdszhvhksw Eju - main motor 30kW - manual lifting of the machine body - manual lifting of the saw shaft - dust extraction nozzle diameter 210mm - overall dimensions L/W/H 1900x1500x1800mm - weight approx. 2000kg ADVANTAGES - German production - stepless feed speed adjustment - floating blade shaft for edging - multi-blade saw sleeve included - laser - insert for short pieces - multi-blade saw, used, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: good (used), Knife holder, shear knife holder, scissor cutting holder, cutting knife holder, scissor slot holder, scissor knife holder Bwelhcsxw Uubsdw Eju -Manufacturer: Dienes, pneumatic cutting blade holder -Type: PSG -Part No.: 245AA50002001 -Blade diameter: 130 mm / 5.118 inches -Dimensions: see photos -Number: 2x shear blade holders available -Price: per piece -Dimensions: 320/70/H145 mm -Weight: 4 kg/pc.

Condition: used, Year of construction: 2019, operating hours: 7,200 h, Equipment: all wheel drive, Very nice Liebherr L 546 for sale Top condition - low operating hours: Liebherr L 546 Z 2plus1 Delivered to customer on April 26, 2019 Original paint Chassis number: VATZ1560-054320 Belhcdwezrapas Eowu Year of manufacture: 2019 Operating hours: approx. 7270 4-cylinder inline engine, 123 kW/167 hp, water-cooled with turbocharger, emission stage 4 Operating weight depending on equipment: approx. 15,000 kg Dimensions depending on equipment: Machine length: 7,200 mm, width 2,500 mm, height 3,300 mm, hydrostatic drive with 3-speed gearbox * Driving vibration damper BSS? Suspension system for attachments * Central lubrication system, factory installed by Liebherr * Reversing fan for cleaning the radiator package - reverse operation * Climbing aid in front of the windshield for easier cleaning of the windshield * Air filter with pre-separator "TopAir" for pre-cleaning the intake air * Premium display with touchscreen * Driver's seat "Comfort" with pneumatic suspension, seat heating, and headrest * Automatic climate control - maintains the set temperature automatically * Adjustable steering column * Armrest on the right * Opening window on the left in the driver's door * Foldable exterior mirrors * Radio with hands-free system * Cooler box in the cab * Rear view camera * Lamp bracket made of steel instead of plastic * 4 work lights on the rear of the driver's cab roof, LED * 4 work lights on the front of the driver's cab roof, LED * Fire extinguisher on the fender * Road approval * Tires 20.5 x 25 L3, front 2 x 30% remaining * Tires 20.5 x 25 L3, rear 2 x 30% remaining * Net price with permanently mounted earth bucket, approx. 2.8 cubic meters: 73,900.00 EUR net + VAT Optional equipment available for an extra charge: * Hydraulic quick coupler 3,550.00 EUR * Pallet fork, 5 or 8 tons, from 2,190.00 EUR Used scales incl. installation * E.g. Pfreundt WK 60 S 5,900.00 EUR * Also available with printer * 3rd hydraulic circuit for attachments such as tipping bucket, grab bucket, sweeper, etc. on request * All prices net export? Domestic plus 19% VAT We can offer you the transport to your location. Sale only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately.

Condition: excellent (used), Here we offer you a RIVSET riveting system. including a riveting tool Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the tool: approx. 279 kg Year of manufacture: 2012 Type: 9524-640-824-5 The system was inspected by the manufacturer and is functional. Bwjlhcdwezgaabs Eju Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2015, RENNER RSF2-45 screw compressor, equipped with a frequency converter and heat exchanger, recently serviced. Technical data: capacity: 6.83 m3/min (6830/min); engine power: 55 kW; pressure: 10 bar; Year: 2015 operating hours: 9691 h net price: 19200 Bwoljzgdf Uohcdw Eju gross price: 23616 Compressor in fully working condition. Service support provided.

Condition: used, Year of construction: 2016, Equipment: all wheel drive, This machine has just arrived at our facility: Liebherr wheel loader L 526 Z 2 plus 1? In good condition? Excellent features? Looks like new!! Liebherr service maintained? Service history stored on the Liebherr central computer! All major services performed by Liebherr. VIN: VATZ1558PZB0444200 Year of manufacture: 2016 First put into service: 2017 Operating hours: Original 10,566 hours, verifiable! Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 136 hp, emission stage TIR IV (Note: Brochure = TIR V!!!) Hydrostatic drive with 3 driving ranges, driving speeds: Range 1: 0 - 6.0 km/h, Range A1-2: 0 - 16.0 km/h, Range A1-3: 0 - 20.0 (40) km/h (currently limited to 20 km/h!) * Standard Z-linkage * Quick coupler with hydraulic attachment kit, 3rd hydraulic circuit for tipping/grabbing/or 4/1 bucket with multi-quick coupler, towing hitch at the rear, ride vibration damper, linkage vibration damper, automatic central lubrication system - factory installed by Liebherr, air conditioning, automatic climate control - automatically maintains temperature, step for easier cleaning of the windshield, steel lamp mounts instead of plastic, folding and heated exterior mirrors, tilting window on the left/driver's door, premium display with touchscreen, driver's seat "Comfort" with pneumatic suspension, seat heating and headrest, Comfort radio with hands-free system, 2 work spotlights on the cab roof at the rear (LED), 2 work spotlights on the cab roof at the front (LED), fuel filter with pre-filter, air intake with pre-separator - TopAir, reversing fan for blowing out the radiator, interior mirror, adjustable steering column, pre-installation for rotating beacon - flashing light, folding upper section of the cab in the center, rear view monitoring with camera - monitor in the display, crane/tie-down eyes at the rear and front, protective ventilation system. Tires 17.5 x 25 L3, front: 2 x 60% Tires 17.5 x 25 L3, rear: 2 x 60% Offer with quick coupler and bucket - at a price of €62,900.00 net. Additional equipment available at an extra cost: * Tipping bucket from 2.5 to 4 cubic meters from €4,950.00 * Bucket with bottom holder for quick coupler from 3.5 cubic meters €3,660.00 * 4-in-1 bucket 2 cubic meters, upon request. Bwslhoz A Nqrocdw Esu * Pallet fork 5 tons from €1,850.00 If desired, also available with a used scale! Pfreundt WK 60 (calibratable) - €5,900.00 Printer for the scale, price upon request. Prices net + VAT or for export. Note: The brochure only approximately corresponds to the offered machine!!! (Brochure is for machines from the year of manufacture 2019 onwards with engine emission class V) Sale only to business customers or for export. Sale in the condition as is. No guarantee or warranty. The specified mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics.