Horizontal bandsaw machine make BEHRINGER type HBP 360 N
make # 392156, year of construction 1992
Cutting range (90°) round 360 mm
cutting range (90°) flat 360 x 360 mm
saw band length 5400 mm
used, in need of repair - as spare part donator
or for new construction SPECIAL PRICE !
Automatic band saw in 2-column design with controlled mitre R/L 60° on both sides
- Fully hydraulic design
- Saw frame made of torsion-resistant welded construction
- Hydraulic full stroke vice
- Saw frame mounted on preloaded linear guides
- Precision carbide saw band guides
- Information on machine status and automatic cycle by means of an illuminated, four-line LCD display
- Mitre cuts adjustable on both sides -30° -45° 90° 45° 30°
- Controlled angle adjustment
- Powerful d...
300 x 300 mm
saw band length 3920 x 34 x 1,1 mm
table height 780 mm
band speed 20 - 100 m/min
total power requirement 3,7 kW
weight of the machine ca. 1,7 t
dimensions 2,0 x 2,05 x 1,7 m
max. round: Ø 380 mm
max. square: 380 x 380 mm
with single stroke: 10 - 510 mm
with multi stroke: max. 4590 mm
dimensions LxWxH: 3100 x 2200 x 1850 mm
weight: 3.100 kg
Cutting diameter 360 mm
Saw band length 3830 mm
Cutting width 27 mm
cutting capacity - square 360 x460, 265x305 mm
Cutting speed 20-90 m/min
Cutting capacity - round 45° - 305 mm
total power requirement 1,1 kW
Machine weight approx. 0,8 t
space requirement approx. 2,20 x 1,25 x 1,65 m
precise saw cuts due to torsion-resistant cast iron saw frame
long saw blade service life due to low-vibration, generously dimensioned cast iron saw frame and specially designed saw blade guide
exact lifting and lowering of the saw frame by two synchronous lifting cylinders
Overload protection by combined saw feed system via flow control valve and cutting pressure control
low wear due to hardened and ground vice guides, clamping plates and material supports
easy operation due to SPS control and ...
Used Horizontal industrial Macc bandsaw 315 for sale
Manufacturer: Macc saws
Model: 315 SI
Cinisello Balsamo, Italy
Condition: used / good condition
Max. cutting dia.mm.:
Category: Saws in Italy
Horizontal Band Saw MACC 315
Max cutting dia. mm.245
Available in our stock.
Typ HBA 360 AU
Frachtbasis ab Standort
Schnittbereich bei 90° 360 mm
Sägebandlänge 5096 x 41 x 1,3 mm
Schnittgeschwindigkeit 16 - 80 m/min
Antriebsleistung 5,5 kW
Max. Abschnittlänge 350 mm
Maschinengewicht ca. 3 t
KASTO HBA 360 AU
BEHRINGER band saw machine HBM-370-A
Cutting range max (Wxh): 440x370mm
Cutting capacity min (Wxh): 12x12mm
AC main drive: 5,5KW
Belt speed 13-130 m / min
Band saw blade 6600 x 41 x 1,3 mm
Control: B & R
Expansion: chip conveyor
Vertical clamping device
Table height 1000 mm
1 USED BAND SAW KASTO HBA 360 AU
- Serial N° : 6016 109 120
- Year : 1995
- Cutting diameter : 360 mm
- Speed variation of rotation of the blade : from 20 to 130 m/min
Equipped with :
- Clamping in pack
- Automatic feeding
- 1 Chips conveyor
- Counting and deducting of parts
German band saw machine TrennjaegerPegas 380 A NC
-cutting diameter 380mm
-max. dimensions 380x500
-max. turning up to 60 degrees
- cutting band 5140x34x1.1
-feed roller 4 m (original)
-weight approx. 2 tons
- double cooling system (liquid pump and oiling)
- belt speed adjustable with inverter
- dimensions for transport 260x210x150 cm
The machine is in perfect condition, ready for operation with original technical documentation.
you can see it in (Głoskowo 05-503)
the indicated net price
Fully hydraulic high performance band saw in heaviest construction, with vertical
parallel movable saw band, for cutting of profiles, tubes and
solid material in all
qualities, including extremely difficult-to-machine material
suitable for the use of bi-metal and carbide saw bands.
Saw unit in fully solid design made of polymer concrete,
thus highest running smoothness and service life of the bandsaw blades is achieved.
Guidance of the sawing unit via two ...
Powerful. Clean. Consistent.
Industrial first high precision band saw
powered completely with electrical drives
• MEBA power package
• Lifting and lowering of the saw frame with a
frequency regulated lead screw drive, with
automatic cutting pressure and feed regulator
• Rapid lowering of the saw frame via button until
material edge by height sensing
• Electric material clamping on main- and in-feed
vice by servo-regulated spindle drive
• Automatic adjustment o...
band sawing machine brand FORTE mod.SBA 361 S+CNC
used, overhauled, guaranteed. Year 2002
cutting capacity diam.520 mm.
cutting arc on two columns
CNC controlled automatic bar feed
very short residual bar end
payment one year
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
MSG Auctions GmbH does not assume liability for the content of linked external websites.