Used CNC lathes 200-249mm turning diameter for sale (111)

Condition: good (used), Parts shown by hand not come. Bwelst Hwimjn Uik Usl Machine is without Y axis. Live tools are on both turret.

Condition: used, Year of construction: 1989, Functionality: fully functional, Lathe Cycles Manufacturer: Weiler Type: UD 24 CNC Control: Siemens Sinumerik 810T Technical Specifications: Spindle bore: 36 mm Bar bore: 24 mm Chuck: 110 mm Swing diameter: 190 mm Turning diameter: 80 mm Work spindle center above floor: 1070 mm Cross slide support - turning center: 45 mm Z-axis: 210 mm X-axis: 120 mm X-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 10,000 mm/min Weight: 1,200 kg Beln Uisv S Ht Nek Ujwl

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i main spindle: max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm travel: x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest Bwoln Uiovduabok Usl - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 1993, CNC Lathe REALMECA type T400 Bjlnov Ahafe Uik Ujwl Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Condition: used, CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t 10 tool turret tailstock Boln Uikjt Ip Uko Uewl bar feeder The machine can be seen under power in our warehouse (M i m u)

Condition: used, Year of construction: 1995, TORNADO 200 year of manufacture 1995 GE FANUC Series O-T control system Maximum machining diameter: 254 mm Maximum turning length: 400 mm Axis travels X : 215 mm Z : 400 mm Maximum spindle speed: 3500 rpm Spindle motor power: 18.5 kW Konik Tool system : VDI 40 Tool head : 12 positions Bsln Uikoua Uyuo Uswl Dimensions of the machine length : 2455 mm width : 1420 mm weight : 3000 kg

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Bsln Uiju Rc Hmek Uowl

Condition: good (used), Year of construction: 2015, Functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 300 mm, turning diameter: 220 mm, spindle bore: 51 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, EMCO Emcoturn E 45 CNC Lathe Year of manufacture: 2015 Control: Sinumerik 828D Technical specifications: Main spindle speed: 10 - 6,300 rpm Drive power: 13 kW Spindle bore: 53 mm Bar capacity: 45 mm Bwoln Ujv Sm N Rsik Uel Travel ranges: X-axis: 160 mm Z-axis: 310 mm C-axis: 0.001° Turret: Number of stations: 12 Adapter: VDI 30 Accessories: - Chip conveyor - Coolant system - Emco Compact Load short-bar loader

Condition: used, Year of construction: 2003, spindle bore: 52 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (min.): 4,000 rpm, bar diameter: 52 mm, The Colchester TORNADO A 90 lathe was manufactured in 2003. Spindle speed 4000 rpm, spindle bore 52 mm and spindle motor power 11 kW. It is equipped with a Fanuc 21 i control system, including a TORNADO MBF feeder. Bweln Uikswc Ac To Ujl

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Part catcher. Bwelnjvfm H Ao Uik Uel

Condition: excellent (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 250M-Y Max. machining diameter: 380 mm Max. machining length: 500 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: Bsln Usv N Et Asik Uswl - Mazatrol 640T Nexus CNC control - Kitagawa B-210 three-jaw chuck, 254 mm diameter - Tool Eye - C-axis - Y-axis - Bar feeder interface - Automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 10 stationary tool holders - 2 driven tool holders - IRCO short bar feeder

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 120160, turning length: 925 mm, turning diameter: 480 mm, total height: 1,990 mm, total length: 3,350 mm, total width: 1,800 mm, power: 0.032 kW (0.04 HP), Equipment: documentation/manual, From trade-in from a long-standing existing customer Bweln Uijqy Edgek Uol

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen 1Spindel, X und Z Achse Bsln Uikjtth Hgo Uowl Kurzstangenlader Spannzangenfutter F48

Condition: used, Year of construction: 2001, turning diameter 220 mm turning length 510 mm control FANUC 21i swing diameter 430 mm x-travel 160 mm z-travel 510 mm spindle bore 45 mm spindle nose DIN 55026 A5 spindle turning speed - stepless 0 - 6300 U/min spindle drive 13 kW max. torque on the spindle max. 78 Nm feed power 4000 / 6000 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Pos tool shaft (cylinder shaft DIN 69880) VDI 30 travel of tailstock automatisch 510 mm tailstock taper MT 4 Bsln Uisv Irhwsk Ujwl total power requirement 17 kVA weight of the machine ca. 2,6 t dimensions of machine L x W x H 2,70 x 2,00 x 2,00 m Accessories: hydr. 3-jaw chuck RÖHM 160 mmø, various toolholders for turret, coolant - condition like new, 100 running hours only -

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Bwelernkhyjn Uik Ujl Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 1996, Functionality: fully functional, Colchester Tornado T-80 CNC lathe production lathe for production from bar up to fi 42mm equipment head 12xVDI30 Bweln Uikewavu Rs Uel Bar feeder MB1000 Collet chuck

Condition: excellent (used), Year of construction: 2011, MAZAK HYPER QUADREX 200 MSY Max. machining diameter (upper turret): 344 mm Max. machining diameter (lower turret): 210 mm Max. milling speed: 6,000 rpm Max. spindle speed main spindle/counter spindle: 6,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - Mazatrol Matrix 2 CNC control - RL100 loading system (gantry robot) - Kitagawa three-jaw chuck for main spindle, diameter 210 mm - Kitagawa three-jaw chuck for second spindle, diameter 169 mm - 2 x 12-station turrets Bsln Uikov I Ebko Uowl - Tool Eye - C-axis - C-axis counter spindle, input accuracy 0.0001° - 2 x Y-axis - High-performance coolant system - Chip conveyor - Various fixed and driven tool holders

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Bsln Uieuml N Uek Uewl Cutting tools and inserts not come. Only tool holder come with machine.

Condition: used, Year of construction: 1992, turning diameter 220 mm turning length 250 mm control SIEMENS SINUMERIK 820 T swing diameter 380 mm chucking diameter 250 mm x-travel 200 mm z-travel 250 mm spindle turning speed range bis 4000 U/min rapid travel - longitudinal/face 15 m/min total power requirement 27,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,2 x 2,9 x 2,2 m Bwoln Uiovh Ivqek Uol acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant

Condition: good (used), Year of construction: 1999, Functionality: fully functional, CNC lathe tornado A90 after renovation in 2024 tool head VDI30 equipment bar feeder collet chuck on E173 Boln Uijwavqxjk Ujwl The machine is working can be seen in production

Condition: good (used), Year of construction: 2001, Machine is in good condition. Bwelerpk Rmjn Uik Uel Parts shown by hand not come. Cutting tools not come.

Condition: good (used), Year of construction: 2002, Colchester Tornado T310 lathe, spindle passage 82.5 mm. Equipment: tailstock, VDI 40 head, MB 1000 bar feeder. 3-jaw chuck, VDI 40 tool holder. The machine can be viewed under power at our plant in Poznań. Bolowavm Ten Uik Ujwl

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Bslou Rdkmon Uik Ujwl

Condition: good (used), Year of construction: 2006, Functionality: fully functional, CNC lathe with Y axis, tailstock. equipment scraper chip conveyor, coolant paper filter, bar feeder, bar holder with 6-65 mm clamping sleeves. Round and hexagonal sleeves, Sauter VDI 30 tool head, 2x straight and 2x angular driven holders. for ER25 Bwslowavk Sen Uik Usl

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Colchester Tornado T10 CNC lathe with bar feeder chip conveyor. The machine can be seen working connected in the production of parts. Equipment 3-jaw chuck tool holders, Bwsln Uikowavk Ej Usl