Used Weiler for sale (194)

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Dedozi S Snepfx Aitjci Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1994, cycle controlled lathe Machine type: Weiler E 35 Control: Siemens 805 Year: 1994 Available after: sofort / now SPECIFICATIONS Center height: 200 mm Max. turning length: 950 mm Turningdiameter: 410 mm Max. swing over slide: 200 mm Spindle bore: 54 mm Spindle speeds: 20 - 3.000 rpm Tailstock: MK 4 Travel X-Axis: 230 mm Power consumption: 10 KW Machine weight: 2100 kg Equipment Dcedpfeziy A Ijx Aitei 46 Spannzangen 173 E nach DIN 6343 / 46 collets 173 E DIN 6343

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Dcodpfx Ajx D Ibbeitji Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Moving steady rest clamping range: 12- mm/ The machine has been working effectively in 1-shift operation since it was purchased/ The chuck incl. hard & several sets of soft jaws and the tailstock can be supplied as accessories (optional)/ Any associated tools could be discussed in the event of an order (otional)/ The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Dedpsx Av Rusfx Aitjci

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 Dcjdjzhcfvspfx Aitoi transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Primus LZ G GS Lead and Draw Spindle Lathe, 3-axis, Heidenhain, Accessories, Very good condition!!! Technical data: >> Year of manufacture 1990, Machine no. 4718 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Brake motor >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, with 4 sets of jaws >> 1 four-jaw chuck, 125 mm, with 2 sets of jaws >> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments >> Spindle stop for collets >> Mulifix size A with 3 steel holders >> 3 drill chucks >> Coolant system About the machine: Dcsdpfx Aszg U Efoitei Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: used, Year of construction: 2002, turning diameter 240 mm turning length 530 mm control Siemens 810 D Powerline swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm Dedpfoycxibex Aitoci turning speeds 6000 U/min 12 Stk. total power requirement --- kW weight of the machine ca. 6,1 t

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Weiler Praktikant 160 B lathe with guide and draw spindle, built to toolmaker precision, year of manufacture 2001, with 3-axis digital display K&C NEW, in very good condition, CE compliant. Technical data: >> Year of manufacture 2001, machine no. 4836 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm Dodpfxjzgcnus Aiteci >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference point, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching of the counting direction >> Quick-change tool holder with collets from 3 to 28 mm, increasing in steps of 1.0 mm >> New 3-jaw chuck 160 mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Coolant system >> Electric spindle guard >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2001, in very good condition. A very nice lathe with a protective device for the working spindle. The slides all move very easily and smoothly. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display from K&C makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: Dcsdpfxjzbhc Is Aitei 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: used, Year of construction: 1987, machine/vehicle number: 7826, This WEILER lathe, model Matador VS 2, will be auctioned off online as part of our industrial auction / machinery auction for inventory clearance at Siemens Ruhstorf – including measuring technology, electrical engineering equipment, office furniture, and office supplies, among other items. You can find this and many other items on our platform. Dcjdpfx Ajzg S Hysitoi

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler Dcjdpfx Aiewnh I Sotoi - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Dcsdpjxacgdjfx Aitoi Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: good (used), Year of construction: 2007, cycle controlled lathe Dodozizd Topfx Aiteci Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical data: Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Spindle speed: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Dsdpfx Asx Htf Hjitjci Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: excellent (used), Year of construction: 2018, operating hours: 4,788 h, functionality: fully functional, machine/vehicle number: NB01, spindle bore: 83 mm, turning length: 1,000 mm, center width: 350 mm, turning diameter over bed slide: 570 mm, bed width: 350 mm, total length: 2,850 mm, total width: 2,400 mm, total height: 1,800 mm, overall weight: 3,800 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 250 mm, torque: 1,300 Nm, The machine is still available for inspection in the factory while powered on and is in like-new condition. Complete technical data is attached in the PDF. Used CNC cycle turning machine CONTROL: SIEMENS SINUMERIK 840 D SL Manufacturer: WEILER Model: E 50 HD x 1000 Machine number: NB01 Operating hours: 4788h Technical data Working range, center distance mm 1000 Swinging diameter over bed mm 570 Swinging diameter over cross slide mm 340 Travel of cross slide mm 340 Bed width mm 350 Turning tool cross-section (height x width) mm 32 x 25 Turning spindle, spindle head according to DIN 55027 (DIN ISO 702-3), size 8 Spindle diameter in the front bearing mm 120 Spindle bore mm 83 Internal taper of the main spindle, metric 90 Main drive, AC drive with 2-stage gearbox Drive power 60% / 100% ED kW 20 / 17 Total speed range 1/min 1-2500 Speed range, gearbox stage I 1/min 1-625 Speed range, gearbox stage II 1/min 4-2500 Max. torque on the spindle Nm 1300 Feed range, AC servo drives Dsdpoziz R Tefx Aitjci Feed force, longitudinal N 12000 Feed force, transverse N 10000 Feed rate, longitudinal and transverse mm/rev 0.001-50 Time feed mm/min 0.001-10000 Max. rapid traverse speed, longitudinal / transverse m/min 10/7 / 5 Thread cutting range, metric threads mm 0.1-2000 Inch threads pitches/inch 112-1/64 Module threads mm 0.05-56 DP threads DP 448-0.05 Number of thread starts max. 360 Tailstock, ram diameter mm 80 Ram travel mm 200 Internal taper of the ram MK 5 Machine weight without attachments kg 3800 Dimensions, length / width / height, center distance 1000 mm 2850 x 2400 x 1800 (without chip conveyor) Standard color, machine frame light gray RAL 7035 Machine base / bed / slide basalt gray RAL 7012 Control panel, white aluminum RAL 9006 Slide panel, blue NCS S 4550-R80B

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg Dcsdpjzd Tycefx Aitji >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity: 1000 x 570 mm spindle bore: 80 mm Dedpfxjy E Hvvo Aiteci multi-tool turret Siemens control steady rest 3-jaw rotary chuck, 315 mm

Condition: good (used), functionality: fully functional, Internal article number: 26062 Lathe Weiler Matador + Multifix "A" base plate + 3-jaw chuck + Collets Center height approx. 150mm Turning diameter over cross slide 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Spindle speed range 30 - 3500 rpm Automatic longitudinal/face feeds Tailstock MK3 Dcsdpfx Aezfhx Noitoi Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: good (used), functionality: fully functional, Internal article number: 26064 Lathe Weiler Ergodor + Digital display + Multifix "A" base plate + Three-jaw chuck Center height: 145mm Center distance: 470mm Dodpfezfhm Tjx Aitoci Swinging diameter over bed: 300mm Spindle bore: 36mm Spindle speed: 15 - 3550 rpm Dimensions (L x W x H): 150 x 70 x 150cm Weight: 1000kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm Dodpfx Aezd Sg Isitsci turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine xH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: used, Year of construction: 1992, Weiler Guide and Lead Screw Lathe Type / Model: Condor B Condition: Used Year of Manufacture: 1992 Technical Data Dcsdpfx Aiozfhgtetei Center height: 165 mm Center distance: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm - 185 mm Main spindle and drive Speed range: 22 - 2800 rpm Spindle bore: 40 mm Spindle head: DIN 55027 / Size 5 (with bayonet fitting) Drive power: 3.2 kW Feed and threading Longitudinal feeds: 0.016 - 0.8 mm/rev Metric thread pitches: 0.18 - 28 mm Tailstock Internal taper of the quill: MK 3 Quill travel: 110 mm Dimensions (L/W/H) approx.: 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Delivery costs via freight forwarder to the curb are shown in the shopping cart or in the individual offer for items on request.

Condition: used, Year of construction: 1996, Weiler Guide and Pull Spindle Lathe Type/Model: Condor AC Condition: Used Year of Manufacture: 1996 Technical Data: Center height: 165 mm Distance between centers: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm Spindle bore: Ø 40 mm Spindle speed, stepless: 22 - 2,800 rpm Spindle head: DIN 55027 Size 5 (short taper) Drive power: 5.5 kW Tailstock and feeds: Tailstock internal taper: MK 3 Quill stroke: 110 mm Feed range automatic longitudinal and cross feeds: approx. 0.016 - 0.50 mm/rev Dodjzfgupjpfx Aitjci Thread cutting range suitable for metric threads and inch threads: approx. 0.20 - 28 mm Dimensions (L/W/H): approx. 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Equipment: - Quick-change tool holder system Multifix, 1 insert size A - Bed stop - Coolant system - Chuck guard with limit switch - Collet chuck system, limit switch secured Costs for delivery by freight forwarder, free to curb, see shopping cart or in individual offers for request items.

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the German company Weiler, model Primus. The machine is in very good condition. I can arrange for the machine to be loaded on site. Net price + 23% VAT. Chuck: 120 Turning diameter: 240 Turning diameter over the carriage: 140 Taper in the headstock: MK2 Minimum speed: 150 Maximum speed: 3200 16 spindle speeds Longitudinal and transverse feeds Metric and inch threads Dedpfjzfgcmex Aitjci Spindle bore: 24 Right and left jaws Steady rest / chuck jaws

Condition: used, Year of construction: 2005, operating hours: 30,547 h, functionality: fully functional, machine/vehicle number: 402, turning diameter over cross slide: 730 mm, turning length: 2,000 mm, turning diameter: 720 mm, spindle bore: 106 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 37 W, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, total height: 1,950 mm, total length: 5,500 mm, total width: 2,500 mm, quill travel distance: 225 mm, quill diameter: 115 mm, torque: 3,150 Nm, overall weight: 5,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Weiler E70x2000 CNC lathe, manufactured in 2005. First owner. Used for single-part production. 50% steel and 50% aluminum have been machined on this machine. The machine can still achieve a tolerance of 0.01 mm. 3 tool cabinets with accessories, as shown in the pictures. 1x Lynette D.20-200 and D.120-300mm 1x Faceplate D.630 1x 3-jaw chuck D.315 by Rota S-Plus 1x Chip conveyor with a discharge height of 1250 mm 1x Mobile chip container Dcjdpfxozhv U Ro Aitei 1x Revolver tool holder quick-change system Parat size 4 4x Parat holders for internal turning D.50 4x Parat holders for external turning 32x25 2x Parat Capto quick-change system 9x Capto holders, as shown in the drawer image. Various turning tools and boring bars for internal and external turning Various holders D.50mm Enhanced coolant supply If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity Dedozdn S Hspfx Aitjci ·Excellent torque performance Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *