Used Ciata T200/R for sale (67,885)

Condition: good (used), Welding rotary table Protec KT 2000 A Codpfx Ajpdqfrebwjgr Load capacity 2000 Kg Infinitely variable inclination angle 0 to 120 ° with hand and foot remote control Height horizontal 1200mm Height tilted to middle 1000mm Special design welding current transmission 800 Ampere length 1700mm, width 1200mm

Condition: good (used), Year of construction: 2009, In different assemblies, several parts. Interface Module Panel Manufacturer. SIEMENS S7 Typ: X1 Profibus-DP ET200S Panel consist of the following pieces: 1 - X1 Profibus-DP ET200S 1 - IM 151-1Standard 6ES7-151-1AA04-0AB0 1 - PM-E 6ES7 138-4CA01-0AA0 4 - 4DI 6ES7 131-4BD01-0AA0 Cgjdegblhvopfx Abwer 3 - 4DO 6ES7 132-4BD01-0AA0 1 - 1SI 6ES7 138-4DF01-0AB0

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Cjdpfxewc Rk Ej Abwogr Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 Cjdpfxjycktrj Abwegr MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Quantity: 1 piece available -Dimensions: Ø 450 x 195 mm -Weight: 31 kg Codeyx S N Ijpfx Abwjgr

Condition: good (used), Tires, solid rubber tires, forklift tires Codpfx Abeyx Dyrowjgr -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc. Csdpfxjyxdtxj Abwegr

Condition: good (used), Built-in control unit, control cassette, controller, bus controller, bus module, Powerlink -Manufacturer: B&R, Ethernet Powerlink with 8 feed modules Cgedpeubfx Rjfx Abwjr -Powerlink: Type X20 BC 0083 -Feed modules: X20 PS 9400 1x / x20 DI 9371 3x / x20 AO 4632 2x / x20 PS 3300 1x / -Price/Delivery: complete -Dimensions: 140/100/110 mm -Weight: 0.7 kg

Condition: good (used), Built-in control unit, control cassette, controller, bus controller, bus module Codpsyxc Ibsfx Abwjgr -Manufacturer: B&R, Control unit controller -Type: X20 BC 0043 C01 -Power feed module: X20 PS 9400 -Number: 1 module available -Dimensions: 105/40/80 mm -Weight: 0.1 kg

Condition: ready for operation (used), Vibrating Chute Jöst Dim: length 2000 mm - width 1100 mm, Driving with two pieces vibration motors of each 1,2 kW Cgjdpsywmqqefx Abwer

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 25000 € 480 € 2050 mm Cgsdpowp S Swsfx Abwjr 6 mm 30 1/min 2.3 ° 750 mm 7.5 kW 800 mm 530 mm 2355 mm 2720 mm 1630 mm 1230 mm 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine - housing renewed - compatible with all B&R 2005 controls - fully functionalManufacturer: B&R type: CP152 spare part no.: 1676890710, 10010792 Cgodpfx Aeyxg Tujbwor manufacturer No.: 3CP152.9

Condition: used, B&R 2005 NC150 counter module - housing renewed - compatible with all B&R 2005 controls - removed from Ferromatik E50 - removed from running machine - fully functional manufacturer: B&R type: B&R 2005 sparepart no.: 11124276 Csdpoyxg Tnefx Abwogr manufacturer no.: 3NC150.6

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm Csdpfx Abeyv D T Tjwjgr screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: good (used), axle configuration: 2 axles, first registration: 12/2017, loading space length: 13,520 mm, loading space width: 2,460 mm, loading space height: 2,590 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,780 mm, color: white, Year of construction: 2017, Equipment: ABS, tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Disk Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 7.200 kg Carrying capacity: 22.800 kg GVW: 30.000 kg Functional Tail lift: Dhollandia DHLMR.30, slider lift, 2000 kg Make of bodywork: Fruehauf Plywood Box Maintenance, history and condition Number of owners: 3 APK (MOT): tested until 12/2026 Technical condition: good Codpfx Asyyu Aaebwsgr Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, * IMMEDIATE AVAILABILITY * Including drive-on ramp / mesh extension / lashing rings Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 450 kg • Payload: approx. 1,550 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall exterior dimensions: 395 x 192 x 152 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13” steel wheels • Brake: yes • Jockey wheel: yes • 100 km/h approval: for additional charge • Including vehicle documents Superstructure: • Floor: Wood, 15 mm phenolic plywood • Sidewalls: Steel • Sidewall height: 39 cm • Chassis: Low-loader, rubber torsion axle • Folding sidewalls: Large drive-on ramp at the rear • Hydraulic system: no • Overrun device & brakes: Knott • Frame/chassis: V-drawbar • Extension: Mesh extension included in price • Locks: Over-centre latch • Lashing eyes: 6 recessed in floor • Supports: available at extra cost • Electrical connector: 13-pin Cjdpfsyyw Ryjx Abwegr • Registration: ZBII & CoC documents Standard equipment: • Galvanised steel side panels • Rear sidewall foldable • Wooden floor • Corner stanchions with insertion options for extensions or mesh • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal recessed lashing rings in the floor • Rear access ramp • Over-centre latch • Removable mesh extension • Tarpaulin buttons for cargo net or flat cover • Overrun brake by Knott • Automatic reversing system • Sturdy V-drawbar • 13-pin connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • Rear frame integrated lighting • Registration documents: Vehicle registration certificate (ZBII) & CoC documents Optional accessories - inquire for details: • Perforated railing on sidewall • High front mesh • High cover • Sideboard extension • Spare wheel • Storage box • Rear support legs • Ramps • Flat cover • Additional lashing eyes • Slotted-hole rails for lashing straps & load bars • Rubber-coated lath strips for lashing straps & load bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export number plates including customs declaration available Descriptions and images are copyright protected! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been a specialist dealer & repair workshop for over 30 years for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Including mesh extension and lashing rings. Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATELY! • Permissible total weight: 2,000 kg • Unladen weight: approx. 350 kg • Payload: approx. 1,650 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall external dimensions: 395 x 192 x 92 cm (L x W x H) • Loading height: approx. 52 cm • Tyres: 13 inch steel rim • Brakes: yes • Jockey wheel: yes • 100 km/h approval: available at extra cost • Including vehicle documents Vehicle specification: • Floor: Plywood, phenolic resin coated, 15mm • Side panels: Steel • Side panel height: 39 cm • Chassis: Low loader, rubber suspension axle • Foldable side panels: rear • Hydraulics: no • Overrun device & brake: Knott • Frame/chassis: V-shaped drawbar • Extension: Mesh extension included in price • Latches: Lever latch • Lashing eyes: 6, recessed in the floor • Support legs: available at extra cost • Lighting plug: 13-pin • Registration: ZBII & COC documents Standard features: • Galvanized steel sheet side panels Cgsdpfx Ajyyw Rtjbwsr • Rear side panel foldable • Wooden floor • Corner posts with insert option for extensions or mesh sides • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal, floor-recessed lashing rings • Lever latch • Removable mesh extension • Tarp buttons for cargo net or flat cover • Knott overrun brake • Automatic reverse system • Robust V-drawbar • 13-pin connector • Reversing light • Large-size safety lighting • Integrated rear fog light • Lighting recessed in rear frame • Registration documents: Registration certificate (ZBII) & COC papers Options & accessories (retrofittable – please enquire): • Slotted rail on side panel • High front mesh • High tarpaulin • Side panel extension • Spare wheel • Toolbox • Rear support legs • Ramps • Flat cover • Additional lashing points • Slotted-rail tie-down system for straps & load bars • Rubber-coated slat rail for straps & bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - Advance dispatch of registration documents or provision of temporary (transfer) plates within Germany possible - Export license plate and customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years we have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, omission, and prior sale reserved -

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and slot mortising machine HOFFMANN HT 200 Very good condition; the machine comes from an educational facility, has seen little use, and is essentially as-new with only minimal signs of wear. Used for milling slots and drilling dowel holes. The drilling height can be read very precisely on a digital counter. Includes 3 tool holders: for bits with M10 external thread, and for bits with 12 mm and 16 mm shank, plus a 2-jaw drill chuck for bits from 3–20 mm. Features workpiece support tables on the left and right, both swiveling and equipped with a support roller. The machine is fitted with a transport chassis. Equipped with 2 angle stops on the machine table for left and right positioning. The clamping arms are repositionable and adjustable. Includes a locating device for balustrade rails, adjustable from 80–160 mm and equipped with a digital counter and locating mushroom. 380V electrical connection, 1400 and 1800W via two speed ranges. 1350 and 2770 RPM. Year of manufacture: 1997 Weight: approx. 280 kg With this machine, you can mill slots for e.g. lock cases and similar items, or produce all types of frame dowel joints both at right angles, butted, and mitre joints. Ideally suited for the production of dowel joints in timber frame construction, as well as furniture, door, window, and staircase manufacturing, and similar applications. The drilling unit is tiltable to 65° on both sides and has a detent at 0°, making it ideal for boring baluster holes in stair stringers. Thanks to the two-speed ranges, even large-diameter bits can be used without risk of burning during drilling. The precise stops and detents, combined with the design of the machine, enable extremely fast production of dowel joints, making the machine highly efficient. The machine requires a 6 bar compressed air connection (air consumption is very low). Right-hand rotation. Performs milling and drilling operations very well and cleanly. Workpiece clamping is achieved using two pneumatic clamping cylinders operated by foot pedal. A linear laser mounted on top of the machine allows for quick and accurate positioning and drilling of marked dowel holes and angled holes. Cgjdpfoyy Rtzex Abwjr Supplied with a precision 12 mm indexing rail, featuring a central detent and 13 stops on each side. Two adjustable stops on left and right to set the working width for slot mortising. Maximum working width: 330 mm Maximum drill hole height: 90 mm Maximum drilling depth: 200 mm (with depth stop) Maximum workpiece height: 150 mm All functions operate perfectly. Includes manual/documentation. We personally deliver and demonstrate the machine anywhere in Germany for €220, giving you a zero-risk purchase. Delivery to Austria and other countries possible on request. The machine table is 1100 mm wide and 250 mm deep. Professional-grade equipment—no DIY-store junk. Ready for immediate operation. Very robust and durable construction. Precision linear guides with play-free ball bearing sleeves are in flawless order and run smoothly; the tilting mechanism operates very smoothly thanks to a ball bearing, and locking is possible via a clamping screw.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Cedpjvfm H Aofx Abwogr Tool setter. Part catcher.

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar - Year of manufacture: 2006 Codpfxsv S Su Ss Abwogr

Condition: excellent (used), machine/vehicle number: 16654, Year of construction: 2019, load capacity: 200 kg, lifting height: 1,700 mm, free lift: 1,700 mm, construction height: 1,969 mm, fork length: 800 mm, enginetype: Electric, manufacturer: [div] Cgodpfx Abexthb Tswor

Condition: good (used), Rilecart R-500 Semi-Automatic Spiral Binding Machine Csdpfeywdntjx Abwogr Efficient semi-automatic machine for producing calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined sections, inserts the hanger, and clamps the binding. Maximum binding width: 500 mm; minimum: 50 mm Automatic hanger loading and installation Capacity: up to 1500 cycles/h Power supply: 230V + compressed air Made in Italy. Weight: 450 kg

Condition: used, Year of construction: 1999, functionality: fully functional, infeed width: 300 mm, We offer this used JENSEN VARIANT 2000 feeder, year of manufacture 1999. Manufacturer: JENSEN Model: VARIANT 2000 Year of manufacture: 1999 Condition: used Type: feeder If you have any questions or require additional information, please contact us via message or phone. J E N S E N VARIANT 2000 dual-lane, fully automatic, with clamps working width - 3.0 m Cgodpoyyvhkefx Abwsr

Condition: used, Year of construction: 2011, USED PLASTIC INJECTION MOULDING MACHINE Manufacturer: ENGEL, Model: Insert 200H/70 Configuration: Rotary table Clamping force: 70 t Year of manufacture: 2011 - well maintained, serviced, no oil leakage. Commissioning date: 09.06.2011 Operating hours: 57,077 h Injection unit: 30 mm Control system: CC200 Weight: 6,200 kg Special features: - Light curtain Csdpfx Abjyx St Towogr - Freely programmable inputs and outputs - 9 freely programmable inputs can be programmed station-dependent - 9 freely programmable outputs - Handling interface: Euromap 67 - Charge amplifier for pressure-dependent holding pressure switchover, including corresponding graphical pages - 3 potential-free monitoring inputs for monitoring of peripheral equipment such as temperature control units - Euromap 63 interface for integration into machine data acquisition systems - Hot runner control / shut-off nozzle control

Condition: used, Year of construction: 2008, functionality: fully functional, mileage: 7,500 km, power: 62 kW (84.30 HP), first registration: 04/2008, overall weight: 4,250 kg, fuel type: diesel, empty load weight: 2,750 kg, next inspection (TÜV): 05/2026, fuel: diesel, Equipment: truck registration, tel. + WhatsApp 00491728909019 Csdpfxeyx Axme Abwogr