Boring mill table

DEMMELER DRALT 2500

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm Iedpfx Adovuua No Neht no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: good (used), Year of construction: 1998, table diameter 1800 mm turning diameter 2060 mm swing diameter 2000 mm work height max. 1557 mm power capacity - milling spindle 30 kW workpiece weight 12 t table drive 100 kW gear box 2 Stufen grinding spindle drive 30 kW milling spindle SK50 Iodjw H Dkmopfx Ad Nsht with Grinding device

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: Isdpfsw Rn R Rox Ad Noht - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 - Coolant device

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer with pneumatic drive can only be offered without putting into operation in our warehouse video at seller's site before dismantling available Ihodpfx Adovuulle Net

Condition: good (used), Centre distance: 6500 mm Centre height: 665 mm Swing diameter over bed: 1270 mm Turning diameter over cross slide: 1000 mm Spindle speed: 3.55-710 rpm Faceplate diameter: 1200 mm X-axis travel: 600 mm Iedew R Avbepfx Ad Nsht Main spindle bore: 128 mm Tailstock quill diameter: 200 mm Tailstock quill travel: 350 mm Tailstock quill taper: DIN 55028 Main spindle nose: DIN 55027 Accessories: 3 steadies, documentation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, We are selling this machine. ISO 50 tool holder, through-spindle cooling X axis 9,000 mm Y axis 4,000 mm S 30 rotary table with 30,000 kg load capacity, dimensions 2,500 x 3,500 mm Ihsdex Auzljpfx Ad Njt Spindle speed 10–3,000 rpm Plates measuring 4,000 x 2,000 mm (1 pc) and 2,000 x 2,000 mm (1 pc) Heidenhain iTNC530 Two angle irons, tools, accessories. This is a complete workstation. The machine will be released from production at the end of January 2026.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Iedjxxn Ukjpfx Ad Neht Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 14,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, Column stroke  Head stroke SKODA HCW 1 – 150 NC horizontal boring machine X-axis ..... 14,000 mm Y-axis ..... 5,000 mm  Ram ejection stroke Z-axis ..... 1,200 mm  Spindle ejection stroke W-axis ..... 1,000 mm  Ram ejection stroke Z+W axis ..... 2,200 mm Headstock  Spindle diameter ..... 150 mm  Spindle centering diameter ..... 235 mm  Spindle clamping cone ..... ISO 50  Ram square section ..... 400x400 mm Ihjdpfsw I Sbzox Ad Njt  Speeds, variable in 3 gears ..... 1-3,000 rpm  Maximum torque ..... 7,000 Nm  Main motor power ..... 71 kW Feeds  X, Y feed rate ..... 0.5-20,000 m/min  Z, W feed rate ..... 0.5-15,000 m/min  Maximum power on the X, Y, and Z axes ..... 35,000 N  Maximum power on the spindle W ..... 30,000 N Busbar width  At the base ..... 1,650 mm  At the column ..... 1,250 mm T390 Rotary and traverse worktable, type SKODA TDV 70 L (2 tables)  The rotary table has a sliding saddle and a swivel clamping plate and its own hydraulic equipment. The table is mounted on the foundation. Two of its axes are numerically controlled by the machine tool's NC control system, and all these functions are controlled by the machine tool's work control panel, and the power supply is brought from the machine tool's control cabinet. Technical Data: Strokes  V-axis, table longitudinal ..... 2,500 mm  B-axis, table rotation ..... 360 degrees  B-axis increments ..... 0.0001 degrees Table plate  Table surface size ..... 4,000 x 4,000 mm  T-slots according to DIN 650 ..... 160 mm  Center load ..... Max. 70,000 kg  Support ring diameter ..... Max. 2,460 mm Beam width ..... 2,350 mm Overall height ..... Approx. 1,200 mm Table unit weight (without workpiece) ..... Approx. 28,000 kg

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Iodpfeu Ibvujx Ad Njht Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Ihodpon Awd Rsfx Ad Njt Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm